No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance static-group

sta-load-balance static-group

Function

The sta-load-balance static-group command creates a static load balancing group and displays the static load balancing group view.

The undo sta-load-balance static-group command deletes a static load balancing group.

By default, no static load balancing group is configured.

Format

sta-load-balance static-group name group-name

undo sta-load-balance static-group { name group-name | all }

Parameters

Parameter

Description

Value

name group-name

Specifies the name of a load balancing group.

The value is a string of 1 to 35 plaintext characters. It does not contain any question mark (?) and cannot begin or end with double quotation marks (" ").

all

Deletes all static load balancing groups.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

In static load balancing mode, APs providing the same services are manually added to a load balancing group. When a STA needs to access a WLAN, it sends an Association Request packet to an AC through an AP. The AC determines whether to allow access from the STA according to the load balancing algorithm.

To configure static load balancing, run the sta-load-balance static-group command in the WLAN view to create a static load balancing group and member (static load balancing group view) command to add APs to the group.

Example

# Configure the static load balancing group named new.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name new
[HUAWEI-wlan-sta-lb-static-new]
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114087

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next