No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
operator-domain-profile (Hotspot2.0 profile view)

operator-domain-profile (Hotspot2.0 profile view)

Function

The operator-domain-profile command binds the specified operator domain profile to a Hotspot2.0 profile view.

The undo operator-domain-profile command unbinds the specified operator domain profile from a Hotspot2.0 profile view.

By default, no operator domain profile is bound to a Hotspot2.0 profile.

Format

operator-domain-profile profile-name

undo operator-domain-profile

Parameters

Parameter

Description

Value

profile-name

Indicates the name of the operator domain profile.

The value must be the name of an existing operator domain profile.

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA accesses the Hotspot2.0 network, it can obtain the network operator domain name information from the AP so that the STA can select a network. Before binding an operator domain profile to a Hotspot2.0 profile, run the operator-domain-profile command to create an operator domain profile and run the domain-name command in the profile view to configure the operator name.

Example

# Bind the operator domain profile operator-domain-profile1 to the hotspot profile.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] operator-domain-profile operator-domain-profile1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123108

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next