No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
broadcasting-interval

broadcasting-interval

Function

The broadcasting-interval command configures the interval for an AP's built-in Bluetooth module to send BLE broadcast frames.

The undo broadcasting-interval command restores the default interval for an AP's built-in Bluetooth module to send BLE broadcast frames.

By default, the built-in Bluetooth module of an AP sends BLE broadcast frames at an interval of 500 ms.

NOTE:
  • Only the AP2050DN-E, AP2051DN, AP2051DN-E, AP2051DN-S, AP4050DE-M, AP4050DE-M-S, AP4050DE-B-S, AP7060DN, AP4051TN, AP6052DN, AP7050DE, AP7052DE, AP7052DN, AP7152DN, AP8050DN, AP8050DN-S, AP8050TN-HD, AP8082DN, AP8150DN, AP8182DN, R250D-E, and R251D-E support the Bluetooth broadcast function.

Format

broadcasting-interval broadcasting-interval-value

undo broadcasting-interval

Parameters

Parameter Description Value
broadcasting-interval-value Specifies the interval for an AP's built-in Bluetooth module to send BLE broadcast frames. The value is an integer that ranges from 100 to 10240, in milliseconds.

Views

BLE profile view

Default Level

2: Configuration level

Usage Guidelines

After enabling the broadcast function of an AP's built-in Bluetooth module using the broadcaster enable command, you can run the broadcasting-interval command to set the interval for the module to send BLE broadcast frames.

Example

# Set the interval for an AP's built-in Bluetooth module to send BLE broadcast frames to 1000 ms.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei] broadcasting-interval 1000
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115679

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next