No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
license server

license server

Function

The license server command specifies the IP address of the license server on a license client. This IP address must be the same as the CAPWAP source address configured on the license server.

The undo license server command deletes the local IP address of the license server on a license client.

By default, no IP address is set for the license server.

Format

license server { ip-address ip-address | ipv6-address ipv6-address }

undo license server

Parameters

Parameter

Description

Value

ip-address ip-address

Specifies the IPv4 address of the license server.

The value is in dotted decimal notation.

ipv6-address ipv6-address

Specifies the IPv6 address of the license server.

The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After centralized license control is enabled, you can run the license server command on a license client to set an IP address for the license server, so that the license client can set up a link with the license server and be managed by the license server.

Prerequisites

The local IP address of the license client has been configured. Run the license client source { ip-address ip-address | ipv6-address ipv6-address } command to configure a local IP address for a license client.

  • When multiple CAPWAP source addresses exist (for example, on switches), this configuration specifies a CAPWAP source address as the local IP address.
  • If this configuration is skipped, the first CAPWAP source address is used as the local IP address of a license client by default.

Example

# Set the IP address for the license server to 10.1.1.1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] license server ip-address 10.1.1.1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114321

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next