No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interference station threshold

interference station threshold

Function

The interference station threshold command configures the alarm threshold for STA interference.

The undo interference station threshold command restores the default alarm threshold for STA interference.

By default, the alarm threshold for STA interference is 32.

Format

interference station threshold threshold-value

undo interference station threshold

Parameters

Parameter

Description

Value

threshold-value

Specifies the alarm threshold.

The value is an integer that ranges from 1 to 256.

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

If there are many STAs that are managed by other APs around an AP, services of the STAs managed by the local AP may be affected.

After the interference detect-enable command is executed to enable interference detection, an AP can detect STAs that are managed by other APs. When the AP detects that the number of such STAs exceeds the alarm threshold configured using the interference station threshold command, the AP sends an alarm to the AC.

Example

# Set the alarm threshold for STA interference to 50.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name radio0
[HUAWEI-wlan-radio-2g-prof-radio0] interference station threshold 50
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116891

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next