No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wapi asu

wapi asu

Function

The wapi asu command specifies an IP address for an authentication server unit (ASU) server.

The undo wapi asu command deletes the IP address of the ASU server.

By default, no IP address is specified for the ASU server.

Format

wapi asu ip ip-address

undo wapi asu ip

Parameters

Parameter

Description

Value

ip-address

Specifies an IP address for the ASU server.

The value is in dotted decimal notation.

Views

Security profile view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If WAPI certificate authentication is configured, an AC sends WAPI authentication packets to the ASU server at the specified IP address.

Prerequisites

If WAPI certificate authentication is specified as a security policy in a security profile, run the wapi asu command to specify an IP address for the ASU server.

Precautions

The wapi asu command helps to determine to which ASU server WAPI packets are sent. Users must ensure the correctness of both ASU certificates and ASU servers; otherwise, they may fail in user authentication.

The system displays the message only when the security profile has been bound to the other profiles.

Example

# Specify IP address 10.164.10.10 for the ASU server.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1] wapi asu ip 10.164.10.10
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116056

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next