No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wmi-server (AP system profile view)

wmi-server (AP system profile view)


The wmi-server command binds a WMI profile to the AP system profile.

The undo wmi-server command unbinds a WMI profile from the AP system profile.

By default, no WMI profile is bound to an AP system profile.


wmi-server profile-name index index

undo wmi-server index index


Parameter Description Value
name profile-name Specifies the name of a WMI profile. The WMI profile name must already exist.
index index Specifies an index. The value is an integer that can be 1 or 2.


AP system profile view

Default Level

2: Configuration level

Usage Guidelines

A WMI profile can take effect only after being bound to an AP system profile.


# Bind WMI profile abc to the AP system view.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-system-profile name apsys
[HUAWEI-wlan-ap-system-prof-apsys] wmi-server abc index 1
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116784

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next