No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset station assoc-info ap-offline-record

reset station assoc-info ap-offline-record

Function

The reset station assoc-info ap-offline-record command deletes information about STAs that connect to the APs in fault state.

Format

reset station assoc-info ap-offline-record { all | { ap-name ap-name | ap-id ap-id } [ radio radio-id ] }

Parameters

Parameter

Description

Value

all

Deletes information about all STAs that connect to APs in fault state from the AC.

-

ap-name ap-name

Clears information about STAs that go online on the AP with a specified name in fault state.

The AP name must exist.

ap-id ap-id

Clears information about STAs that go online on the AP with a specified ID in fault state.

The AP ID must exist.

radio radio-id

Deletes information about STAs that connect to the specified radio of the AP in fault state.

The radio ID must exist.

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Before collecting statistics on the STAs that connect to the APs in fault state within a specific period, run the reset station assoc-info ap-offline-record command to delete the original STA information.

Prerequisites

The APs in fault state have been enabled to allow access of new STAs using the keep-service enable allow new-access command.

Function

The deleted STA information cannot be restored. Exercise caution when you run the reset station assoc-info ap-offline-record command.

Example

# Delete information about all STAs that connect to APs in fault state from the AC.

<HUAWEI> reset station assoc-info ap-offline-record all
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127625

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next