No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nd trust port (WDS profile view)

nd trust port (WDS profile view)


The nd trust port command enables an ND trusted port in a WDS profile.

The undo nd trust port command disables an ND trusted port in a WDS profile.

By default, an ND trusted port is enabled in a WDS profile.


nd trust port

undo nd trust port




WDS profile view

Default Level

2: Configuration level

Usage Guidelines

After an ND trusted port is enabled in a WDS profile and the WDS profile is applied to an AP, the AP receives valid ND protocol packets and forwards the packets to STAs or peer APs so that the STAs can obtain valid IPv6 addresses and go online.


# Enable an ND trusted port in the WDS profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test 
[HUAWEI-wlan-wds-prof-test] nd trust port
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126060

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next