No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The ap-group command creates an AP group and displays the AP group view, or displays the view of an existing AP group.

The undo ap-group command deletes an AP group.

By default, the system provides the AP group default.


ap-group name group-name

undo ap-group { name group-name | all }





name group-name

Specifies the name of an AP group.

The value is a string of 1 to 35 characters. It does not contain question marks (?), marks (/), or spaces, and cannot start or end with double quotation marks (" ").


Deletes all AP groups.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If you need to perform the same configuration on multiple APs, add the APs to an AP group and perform the configuration in the AP group. The configuration takes effect on all APs of the group. This prevents repetitive configuration.

Follow-up Procedure

Run the ap-group (AP view) or ap-regroup command to add APs to an AP group.


  • If the configuration of an AP in the AP view is different from that in the AP group view, the configuration in the AP view is preferentially used.

  • The device supports a maximum of 256 AP groups.

  • The AP group that has APs cannot be deleted. The AP group default cannot be deleted either.

  • By default, an AP group has the following profiles bound: AP system profile default, 2G radio profile default, 5G radio profile default, regulatory domain profile default, WIDS profile default, and AP wired port profile default.


# Create the AP group group1 and display the AP group view.
<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-group name group1
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126476

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next