No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wlan igmp-snooping vap-cac

display wlan igmp-snooping vap-cac

Function

The display wlan igmp-snooping vap-cac command displays the multicast CAC configuration and statistics on a VAP.

Format

display wlan igmp-snooping vap-cac { ap-id ap-id | ap-name ap-name }

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the multicast CAC configuration and statistics on a VAP, including the bandwidth and user statistics.

Example

# Display the multicast CAC configuration and statistics on VAPs of the AP with ID 0.

<HUAWEI> display wlan igmp-snooping vap-cac ap-id 0
Info: This operation may take a few seconds, please wait.done.
Rf            : Radio ID                  WID             : WLAN ID
CurBw         : Current bandwidth(kbps)   MaxBw           : Max bandwidth(kbps)
CurUser       : Current user number       MaxUser         : Max user number
BwUtilization : Bandwidth utilization     UserUtilization : User utilization
--------------------------------------------------------------------------------
Rf  WID  CurBw/MaxBw        BwUtilization  CurUser/MaxUser  UserUtilization
--------------------------------------------------------------------------------
0   1    0/11               0%             0/6              0%
--------------------------------------------------------------------------------
Total: 1

Table 11-271  Description of the display wlan igmp-snooping vap-cac command output

Item

Description

Rf

Radio ID.

WID

WLAN ID.

CurBw/MaxBw

Current multicast bandwidth/Maximum multicast bandwidth of a VAP.

BwUtilization

Multicast bandwidth utilization.

CurUser/MaxUser

Current number of multicast users/Maximum number of multicast users on a VAP.

UserUtilization

Percentage of current multicast users against the maximum number of multicast users that is configured globally.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114408

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next