No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ND

ND

ND/4/ADDR_DUPLICATE

Message

ND/4/ADDR_DUPLICATE: The address [Ipv6Addr] on [IfName] is duplicated.

Description

An address assigned to an interface failed address conflict detection.

Parameters

Parameter Name Parameter Meaning

[Ipv6Addr]

IPv6 address

[IfName]

Interface name

Possible Causes

The IPv6 address configured on the interface was being used by another node.

Procedure

  1. Assign an IPv6 address that has not been used by any node to the interface.

ND/4/NDSEND_AUTH_FAILED

Message

ND/4/NDSEND_AUTH_FAILED: ND option check failed. (PacketType=[STRING], CheckType=[STRING], Interface=[STRING], SourceAddress=[STRING], DestinationAddress=[STRING], SourceMacAddress=[STRING])

Description

ND option check failed.

Parameters

Parameter Name Parameter Meaning

PacketType

Indicates the packet type.
  • NS packet
  • NA packet
  • RS packet
  • RA packet

CheckType

Indicates the check type.
  • CGA option check
  • RSA option check

Interface

Indicates the name of the interface that receives the packet.

SourceAddress

Indicates the source address of the packet.

DestinationAddress

Indicates the destination address of the packet.

SourceMacAddress

Indicates the source MAC address of the packet.

Possible Causes

ND security is enabled on the interface. When the device checks the CGA or RSA option in a received packet and discovers that the packet is invalid, a check failure log is recorded.

Procedure

  • This log is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5648

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next