No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MCMD

MCMD

MCMD/4/LHB_OVER30S

Message

MCMD/4/LHB_OVER30S: The multicore process [STRING] has lost the heartbeat for more than 30s.(Slot=[STRING], Vcpu=[ULONG], Pid=[ULONG])

Description

The multicore process has lost the heartbeat for more than 30s.

Parameters

Parameter Name Parameter Meaning

[STRING]

Indicates a process name.

Slot

Indicates a slot.

Vcpu

Indicates a virtual CPU.

Pid

Indicates a process ID.

Possible Causes

Sub-cores are too busy to send the heartbeat to the monitoring process in a timely manner.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.

MCMD/3/LHB_OVER90S

Message

MCMD/3/LHB_OVER90S: The multicore process [STRING] is killed because it has lost the heartbeat for more than 90s.(Slot=[STRING], Vcpu=[ULONG], Pid=[ULONG])

Description

The multicore process is killed because it has lost the heartbeat for more than 90s.

Parameters

Parameter Name Parameter Meaning

[STRING]

Indicates a process name.

Slot

Indicates a slot.

Vcpu

Indicates a virtual CPU.

Pid

Indicates a process ID.

Possible Causes

Sub-cores are too busy to send the heartbeat to the monitoring process in a timely manner.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.

MCMD/3/PROC_EXIT

Message

MCMD/3/PROC_EXIT: The multicore process [STRING] exited, system will reboot.(Slot=[STRING], Vcpu=[ULONG], Pid=[ULONG])

Description

The multicore process has exited, and the system will restart.

Parameters

Parameter Name Parameter Meaning

[STRING]

Indicates a process name.

Slot

Indicates a slot.

Vcpu

Indicates a virtual CPU.

Pid

Indicates a process ID.

Possible Causes

Sub-cores are too busy to send the heartbeat to the monitoring process in a timely manner.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5493

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next