No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACL6

ACL6

ACL6/4/BUDRUN_FAIL

Message

ACL6/4/BUDRUN_FAIL:Buildrun failed!

Description

Failed to generate configuration information.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Configurations failed to be displayed due to a memory allocation failure.

Procedure

  1. Run the display memory-usage command to check whether the memory usage of the active MPU exceeds 85%.

    • If so, go to step 2.
    • If not, go to step 4.

  2. Run the display acl all command to view configurations of all ACLs. Check whether redundant ACLs are configured.

    • If so, run the undo acl ipv6 command in the system view to delete the redundant configurations, and go to step 3.
    • If not, go to step 4.

  3. Check whether configuration information can be generated.

    • If so, no further action is required.
    • If not, go to step 4.

  4. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

ACL6/4/FRGISPCT_BUDRUN_FAIL

Message

ACL6/4/FRGISPCT_BUDRUN_FAIL:Fragment inspect: buildrun failed!

Description

Failed to generate configuration information during fragment inspection.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

ACL resources were insufficient.

Procedure

  1. Run the display memory-usage command to check whether the memory usage of the active MPU exceeds 85%.

    • If so, go to step 2.
    • If not, go to step 4.

  2. Run the display acl all command to view configurations of all ACLs. Check whether redundant ACLs are configured.

    • If so, run the undo acl ipv6 command in the system view to delete the redundant configurations, and go to step 3.
    • If not, go to step 4.

  3. Check whether configuration information can be generated.

    • If so, no further action is required.
    • If not, go to step 4.

  4. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

ACL6/4/IF_ERR

Message

ACL6/4/IF_ERR:Packet filter: invalid interface, this interface may be deleted!

Description

The interface enabled with packet filtering was invalid or may be deleted.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

This interface was deleted or did not exist.

Procedure

  • This log message is informational only, and no action is required.

ACL6/4/INIT_ERR

Message

ACL6/4/INIT_ERR:Component is not initialized!

Description

Component is not initialized.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Component is not initialized.

Procedure

  • Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

ACL6/3/INIT_PKT_FLT_FAIL

Message

ACL6/3/INIT_PKT_FLT_FAIL:Failed to initialize packet filter!

Description

Failed to initialize packet filtering.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Failed to initialize packet filtering due to insufficient memory.

Procedure

  • Collect log information and configuration information, and then contact technical support personnel. For details, see High Memory Usage in the Revelations of Troublesolving.

ACL6/3/PKTFLT_BUDRUN_FAIL

Message

ACL6/3/PKTFLT_BUDRUN_FAIL:Failed to buildrun packet filter!

Description

Failed to generate configuration information on packet filtering.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

ACL resources were insufficient.

Procedure

  1. Run the display memory-usage command to check whether the memory usage of the active MPU exceeds 85%.

    • If so, go to step 2.
    • If not, go to step 4.

  2. Run the display acl all command to view configurations of all ACLs. Check whether redundant ACLs are configured.

    • If so, run the undo acl ipv6 command in the system view to delete the redundant configurations, and go to step 3.
    • If not, go to step 4.

  3. Check whether configuration information can be generated.

    • If so, no further action is required.
    • If not, go to step 4.

  4. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

ACL6/3/REG_FLT_FAIL

Message

ACL6/3/REG_FLT_FAIL:Failed to register packet filter handler!

Description

FAIL:Failed to register packet filter handler!

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Failed to register packet filter handler.

Procedure

  • Restart the device. If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

ACL6/4/RPC_FAILED

Message

ACL6/4/RPC_FAILED:Failed to call synchronization IPC! (ErrorCode= [ULONG])

Description

Failed to call synchronization IPC.

Parameters

Parameter Name Parameter Meaning
ErrorCode Indicates the error codes, including the following:

2: indicates that memory allocation for sending messages failed.

3: indicates that synchronizing IPC timed out.

4: indicates that message waiting queue overflowed.

Possible Causes

When the ACL6 module sends information to the LPU, the RPC failed to call functions.

Procedure

  1. Run the display device command to check whether the LPU has registered.

    • If so, go to step 3.
    • If not, go to step 2.

  2. If the LPU has not registered, RPC communication fails, which is normal. This log is informational only, and no action is required.
  3. Collect log information about RPC message sending failures of the LPU, and contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5483

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next