No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CFM

CFM

CFM/4/B2S_BACKUP_FAILED

Message

CFM/4/B2S_BACKUP_FAILED:Failed to transfer the configuration file to server [server-ip] through [transport-type] when automatically backing up the configuration.

Description

Failed to transfer the configuration data to the server when backing up the configuration file to the server.

Parameters

Parameter Name Parameter Meaning
[server-ip] Indicates the IP address of the server.
[transport-type] Indicates the file transfer mode, such as FTP, TFTP, or SFTP.

Possible Causes

  1. The password was incorrect.

  2. The user name was inexistent or the path to the server was inexistent.

  3. The server was unreachable during the transfer of the configuration file due to a network fault.

Procedure

  • Run the ping command on the device to ping the server to check whether the server is reachable.
  • Set the device as a client to access the server.
  • Re-configure the path to the server if it is incorrect.
  • If the configuration file fails to be transferred only once, it is probably caused by the network status of the time, and no action is required.

    If the configuration file fails to be transferred repeatedly, check the link connecting the device to the server.

CFM/4/BACKUPCONFIG_SUC

Message

CFM/4/BACKUPCONFIG_SUC:Succeeded in backing up file [STRING].

Description

The automatic configuration file backup succeeded.

Parameters

Parameter Name Parameter Meaning
[STRING] Configuration file name

Possible Causes

The automatic configuration file backup succeeded, and a log was generated.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/CFM_INCONSISTENT_FILE_IMG

Message

CFM/4/CFM_INCONSISTENT_FILE_IMG: If the image file in master and slave board is inconsistent when system reboot, the slave board will fail to register. (File in master=[STRING], File in slave=[STRING])

Description

The slave board cannot be registered if the image files on the master and slave boards are inconsistent when the system reboots.

Parameters

Parameter Name Parameter Meaning
File in master Name of the file on the master board
File in slave Name of the file on the slave board

Possible Causes

The image files on the master and slave boards are inconsistent.

Procedure

  1. Ensure the consistency of the image files on the master and slave boards.

CFM/4/CFM_INCONSISTENT_FILE_CFG

Message

CFM/4/CFM_INCONSISTENT_FILE_CFG: If the configuration file in master and slave board is inconsistent when system reboot, the configuration in master board may lose. (File in master=[File in master], File in slave=[File in slave], Reason=[Reason])

Description

The configuration file on the master main control board would be lost if configuration files on the master and slave main control boards were inconsistent when the system reboots.

Parameters

Parameter Name Parameter Meaning
File in master Name of the configuration file on the master main control board
File in slave Name of the configuration file on the slave main control board
Reason The reason for the inconsistency of configuration files on the master and slave main control boards:
  • 1: The sizes of configuration files were different.
  • 2. Other reasons.

Possible Causes

Configuration files on the master and slave main control boards were inconsistent.

Procedure

  1. Ensure that configuration files on the master and slave main control boards are consistent.

CFM/6/CFM_OVERWRITESOFTWARE

Message

CFM/6/CFM_OVERWRITESOFTWARE: When deciding whether to overwrite the system software file, the user chose [Y/N].

Description

The user chose Y or N to decide whether to overwrite the system software file.

Parameters

Parameter Name Parameter Meaning
Y/N A user can decide whether to overwrite the system software file:
  • Y: Overwrite the system software file.
  • N: Do not overwrite the system software file.

Possible Causes

When you set the next startup system software file, the system prompted you to decide whether to overwrite the system software file if system software files with the same name exist on the slave main control board.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/CFM_SYNCFGFILEFAIL

Message

CFM/4/CFM_SYNCFGFILEFAIL: Failed to synchronize the next startup configuration file to slave board. (FileName=[FileName], SlotNum=[SlotNum])

Description

The next startup configuration file failed to be synchronized to the slave main control board.

Parameters

Parameter Name Parameter Meaning
FileName Name of the next startup configuration file
SlotNum Number of the slot in which the slave main control board is installed

Possible Causes

Failed to synchronize the next startup configuration file on the master main control board to the slave main control board.

Procedure

  1. Because next startup configuration files on the master and slave main control boards may be inconsistent, run the startup saved-configuration command on the slave main control board to synchronize the next startup configuration file on the master main control board to the slave main control board after the device starts.

CFM/4/CFM_TRANS_FILE

Message

CFM/4/CFM_TRANS_FILE:The configuration file was transferred through [TransProtocol].(UserName=[UserName], OperateType=[OperateType], SrcFile=[SrcFile], DstFile=[DstFile], DstHost=[DstHost], VPN=[VPN], ErrCode=[ErrCode])

Description

The configuration file was automatically saved to the server.

Parameters

Parameter Name Parameter Meaning
TransProtocol File transfer protocol
  • FTP
  • TFTP
  • SFTP
UserName User name
OperateType Operation type
  • Get: Downloads files.
  • Put: Uploads files.
SrcFile Name of the source file to be uploaded or downloaded
DstFile Name of the destination file to be uploaded or downloaded
DstHost Destination host name
VPN Name of a VPN instance
ErrCode Error code

Possible Causes

The system automatically uploaded or downloaded the configuration file.

Procedure

  1. This log message is informational only, and no action is required.

CFM/6/CFM_UNDO_SCHEDULE_NO

Message

CFM/6/CFM_UNDO_SCHEDULE_NO: When being asked whether to undo schedule reboot function, the user chose N.

Description

The user selects N when being asked whether to remove the scheduled reboot function.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

When a user sets the startup files or configuration files, if the scheduled reboot function is configured, the system prompts the user to check whether to remove this function.
  • If the user selects Y, the scheduled reboot function is removed and the process of setting the startup files or configuration files continues.
  • If the user selects N, the process of setting the startup files or configuration files is terminated.

This log message is generated when the user selects N.

Procedure

  1. This log message is informational only, and no action is required.

CFM/6/CFM_UNDO_SCHEDULE_YES

Message

CFM/6/CFM_UNDO_SCHEDULE_YES: When being asked whether to undo schedule reboot function, the user chose Y.

Description

The user selects Y when being asked whether to remove the scheduled reboot function.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

When a user sets the startup files or configuration files, if the scheduled reboot function is configured, the system prompts the user to check whether to remove this function.
  • If the user selects Y, the scheduled reboot function is removed and the process of setting the startup files or configuration files continues.
  • If the user selects N, the process of setting the startup files or configuration files is terminated.

This log message is generated when the user selects Y.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/CLEAR

Message

CFM/4/CLEAR:When deciding whether to clear inactive configuration of slot [STRING], the user chose [STRING].

Description

The user chose Y/N when deciding whether to clear the configuration of the board that is not installed in a specified slot.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the name of a slot.
[STRING] Indicates the operation that the user chooses.

Possible Causes

The user chose Y/N when deciding whether to clear the configuration of the board that is not installed in a specified slot.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/CFM_CLEARINTERFACECFG

Message

CFM/4/CFM_CLEARINTERFACECFG: When deciding whether to clear configuration(s) of the interface [interface-name], the user chose [Y/N].

Description

The user chose Y or N when the system prompted the user to clear the configuration of an interface.

Parameters

Parameter Name Parameter Meaning
interface-name Interface name
Y/N Letter that the user input

Possible Causes

The system required the user to determine whether to clear the configuration of an interface during command execution.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/CRC_CHK

Message

CFM/4/CRC_CHK:The user chose [STRING] when deciding whether to check CRC of the resource file.

Description

The user decided whether to check the CRC of the resource file before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING]

Indicates the character input by the user to confirm the operation:

Y: indicates that the CRC of the resource file will be checked.

N: indicates that the CRC of the resource file will not be checked.

Possible Causes

The user decided whether to check the CRC of the resource file before running the command.

Procedure

  1. This log message is informational only, and no action is required.

CFM/5/FILE_NOTEXIST

Message

CFM/5/FILE_NOTEXIST: Failed to set the [object] because the system file does not exist on [slot-id].

Description

Failed to set the system file to be loaded at the next startup of the cluster because the file did not exist.

Parameters

Parameter Name Parameter Meaning
[object] Indicates the type of the file:
  • Startup file
  • PAF file
  • License file
  • Configuration file
[slot-id] Indicates the name of a board.

Possible Causes

The system file specified in the startup command did not exist on the relevant board.

Procedure

  1. Run the dir command to check whether the system file specified in the startup command exists on the relevant board.

    • If the system file exists, go to Step 3.
    • If the system file does not exist, go to Step 2.

  2. Upload the relevant system file and then run the startup command again. Then, check whether the configuration succeeds.

    • If the configuration succeeds, go to Step 4.
    • If the configuration fails, go to Step 3.

  3. Run the display diagnostic-information command and save the command output; Collect log information and configuration information, and then contact technical support personnel.
  4. End.

CFM/4/FILELENGTH_NOTMATCH

Message

CFM/4/FILELENGTH_NOTMATCH:Failed to set the [object] because the size of the system file is inconsistent with that of the homonymous file on [slot-id].

Description

The configuration failed because the size of the system file was inconsistent with that of the existing file.

Parameters

Parameter Name Parameter Meaning
[object] Indicates the type of the file:
  • Startup file
  • PAF file
  • License file
  • Configuration file
[slot-id] Indicates the name of a board.

Possible Causes

The configuration failed because the size of the system file was inconsistent with that of the existing file.

Procedure

  1. Run the dir command to check whether the size of the system file specified in the startup command is consistent with that of the system file on the main control board.

    • If the sizes of the system files are consistent, go to Step 3.
    • If the sizes of the system files are inconsistent, go to Step 2.

  2. Delete the system file specified in the startup command from the relevant board and upload the file again. Then run the startup command to set the system file to be loaded at the next startup and check whether the configuration succeeds.

    • If the configuration succeeds, go to Step 4.
    • If the configuration fails, go to Step 3.

  3. Run the display diagnostic-information command and save the command output; Collect log information and configuration information, and then contact technical support personnel.
  4. End.

CFM/4/OVERWRITE_FILE

Message

CFM/4/OVERWRITE_FILE:When deciding whether to overwrite the configuration file [STRING], the user chose [STRING].

Description

The user decided whether to overwrite the configuration file before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the filename used to save configurations.
[STRING] Prompts the user to confirm the action.

Possible Causes

The user decided whether to overwrite the configuration file before running the command.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/RECOVERBACKUPFAIL

Message

CFM/4/RECOVERBACKUPFAIL:Failed to back up file [STRING]. (Error code= [ULONG])

Description

Failed to back up the configuration file during configuration restoration.

Parameters

Parameter Name Parameter Meaning
[STRING] Configuration file name
Error code Error code about the backup failure

Possible Causes

Backing up a configuration file failed.

Procedure

  1. This log message is informational only, and no action is required.

CFM/3/RECOVERCMDFAIL

Message

CFM/3/RECOVERCMDFAIL:Failed to recover configuration [command] under view [view].

Description

Failed to recover a command in a certain view.

Parameters

Parameter Name Parameter Meaning
[command] Command string
[view] Name of a view

Possible Causes

During configuration restoration, a command failed to be restored.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

CFM/4/RST_CFG

Message

CFM/4/RST_CFG:The user chose [Y/N] when deciding whether to reset the saved configuration.

Description

The user decided whether to reset the saved configuration before running the command.

Parameters

Parameter Name Parameter Meaning
[Y/N] Prompts the user to confirm the action.

Possible Causes

The user decided whether to reset the saved configuration before running the command.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/SAVE

Message

CFM/4/SAVE:The user chose [Y/N] when deciding whether to save the configuration to the device.

Description

The user decided whether to save the configuration to the device before running the command.

Parameters

Parameter Name Parameter Meaning
[Y/N] Prompts the user to confirm the action.

Possible Causes

The user determined whether to save the configuration to the device before running the command.

Procedure

  1. This log message is informational only, and no action is required.

CFM/4/SAVE_FILE

Message

CFM/4/SAVE_FILE:When deciding whether to save the configuration to the file [STRING], the user chose [STRING].

Description

The user decided whether to create the configuration file before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the filename used to save configurations.
[STRING] Prompts the user to confirm the action.

Possible Causes

The user decided whether to create the configuration file before running the command.

Procedure

  1. This log message is informational only, and no action is required.

CFM/5/SAVE_FILE_RECORD

Message

CFM/5/SAVE_FILE_RECORD: The system automatically saved the current configuration to the file. (FileName=[STRING])

Description

The system automatically saved the current configuration to the file.

Parameters

Parameter Name Parameter Meaning
FileName Indicates the filename used to save configurations.

Possible Causes

When the ISSU was used, or automatic protection was enabled, the system stored the current configurations into the configuration file.

Procedure

  1. This log message is informational only, and no action is required.

CFM/5/SAVECFG_NO

Message

CFM/5/SAVECFG_NO:When being asked whether to save current configuration, the user chose N.

Description

The user chose N when being asked whether to save the configuration before restart.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Before the system was restarted, the user chose not to save the configuration.

Procedure

  1. This log message is informational only, and no action is required.

CFM/5/SAVECFG_YES

Message

CFM/5/SAVECFG_YES:When being asked whether to save current configuration, the user chose Y.

Description

The user chose Y when being asked whether to save the configuration before restart.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Before the system was restarted, the user chose to save the configuration.

Procedure

  1. This log message is informational only, and no action is required.

CFM/3/CFM_SLAVERUNCMDFAIL

Message

CFM/3/CFM_SLAVERUNCMDFAIL: Failed to execute command on slave board. (Task name=[STRING], IP address=[STRING], User name=[STRING], Command=[STRING])

Description

Failed to execute commands on the SMB.

Parameters

Parameter Name Parameter Meaning
Task name Task name
IP address IP address

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

User name Name of a login user

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

Command Executed command

Possible Causes

Commands fail to be backed up to the SMB in real time after being configured on the AMB.

Procedure

  • Collect log information and configuration information, and then contact technical support personnel.

CFM/5/SUMRULECANCEL

Message

CFM/5/SUMRULECANCEL:The daylight-saving-time config is canceled.

Description

The configuration of the daylight saving time is canceled.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The undo clock daylight-saving-time command is run to cancel the configuration of the daylight saving time.

Procedure

  1. This log message is informational only, and no action is required.

CFM/5/SUMRULECHG

Message

CFM/5/SUMRULECHG:The daylight-saving-time config is changed. (DstName=[STRING], Mode=[STRING], StartConfigType=[STRING], StartDate=[STRING], StartWeek=[STRING], StartTime=[STRING], EndConfigType=[STRING], EndDate=[STRING], EndWeek=[STRING], EndTime=[STRING], OffsetTime=[STRING])

Description

The daylight saving time is configured and related information is recorded.

Parameters

Parameter Name Parameter Meaning
DstName Name of the daylight saving time
Mode Mode of the daylight saving time
StartConfigType Start rule of the daylight saving time
StartDate Start date of the daylight saving time
StartWeek Start week of the daylight saving time
StartTime Start time of the daylight saving time
EndConfigType End rule of the daylight saving time
EndDate End date of the daylight saving time
EndWeek End week of the daylight saving time
EndTime End time of the daylight saving time
OffsetTime Offset of the daylight saving time

Possible Causes

The clock daylight-saving-time command is run to configure the daylight saving time.

Procedure

  1. This log message is informational only, and no action is required.

CFM/5/SUMTMRCHG

Message

CFM/5/SUMTMRCHG:The system is changed to [para1] and the system time is changed from [para2] to [para3].

Description

When the system time changes along with the change of the daylight saving time, the system time before and after the change is recorded.

Parameters

Parameter Name Parameter Meaning
para1 Type of the system time, daylight saving time or non-daylight saving time
para2 System time before the change of the daylight saving time
para3 System time after the change of the daylight saving time

Possible Causes

The system time changes due to the change of the daylight saving time.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5563

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next