No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM

LSPM

LSPM/6/BFD_AGE

Message

LSPM/6/BFD_AGE:Notified BFD to age the unrefreshed BFD sessions for LSP.

Description

LSPM notified BFD to age the unrefreshed BFD sessions of LSP.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

BFD aged the unrefreshed BFD sessions before GR ended.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/BFD_FULL_CREATING

Message

LSPM/6/BFD_FULL_CREATING: BFD return session full while creating BFD session. (VRF=[STRING], PeerIPAddress=[STRING])

Description

The number of sessions reached the upper limit of the PAF or the license when the BFD session was created.

Parameters

Parameter Name Parameter Meaning

VRF

  • For public network, the VRF is public(0).
  • For private network, the VRF isVRF-Name(VRP-Index).

PeerIPAddress

Indicates the destination IP address.

Possible Causes

The number of sessions reached the upper limit of the PAF or the License.

Procedure

  1. Delete redundant BFD sessions.
  2. Collect log information and configuration information, and then contact technical support personnel.

LSPM/3/BFD_LDP_UNABLE_INIT

Message

LSPM/3/BFD_LDP_UNABLE_INIT:Unable to initialize BFD for LDP LSP.

Description

The BFD of the LDP LSP cannot be initialized.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Failed to initialize the LDP BFD.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/DSTEMODESWITCH

Message

LSPM/6/DSTEMODESWITCH:DS-TE mode switched from [mode1] to [mode2].

Description

The DS-TE mode was switched from one mode to the other.

Parameters

Parameter Name Parameter Meaning
[mode1] Indicates the DS-TE mode1, including standard and non-standard DS-TE modes.
[mode2] Indicates the DS-TE mode1, including standard and non-standard DS-TE modes.

Possible Causes

A user switched the DS-TE mode.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/3/FAIL_CREATE_STALE_IF

Message

LSPM/3/FAIL_CREATE_STALE_IF:Cannot create the stale interface [interface-name] because the stale interface number reaches limit.

Description

Failed to create the stale interface.

Parameters

Parameter Name Parameter Meaning
[interface-name] Indicates the name of interface.

Possible Causes

Failed to create the stale interface.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/3/FAIL_DELETE_STALE_IF

Message

LSPM/3/FAIL_DELETE_STALE_IF:Failed to delete the stale interface [interface-name].

Description

Failed to delete the stale interface.

Parameters

Parameter Name Parameter Meaning
[interface-name] Indicates the name of an interface.

Possible Causes

Failed to delete the stale interface.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/FLOODFORTECLASSEVT

Message

LSPM/6/FLOODFORTECLASSEVT:Flooded TE resource information for TE-Class change event.

Description

TE resources were flooded when TE-Class changed.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The TE-Class mapping table was changed.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/GLOBALMPLSTEENABLE

Message

LSPM/6/GLOBALMPLSTEENABLE:Global MPLS TE capability was enabled.

Description

MPLS TE was globally enabled.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

MPLS TE was globally enabled.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/GR_END_TIME

Message

LSPM/6/GR_END_TIME:RSVP GR ended at time [time].

Description

End time of RSVP GR.

Parameters

Parameter Name Parameter Meaning
[time] Indicates the end time.

Possible Causes

When GR ended, RSVP notified LSM. LSPM recorded the time when the message for RSVP GR end was received.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/GR_START_TIME

Message

LSPM/6/GR_START_TIME:RSVP GR began at time [time].

Description

Start time of RSVP GR.

Parameters

Parameter Name Parameter Meaning
[time] Indicates the start time.

Possible Causes

When GR started, RSVP notified LSM. LSPM recorded the time when the message for RSVP GR start was received.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/GRAGINGBEGIN

Message

LSPM/6/GRAGINGBEGIN:LSPM started RSVP aging at time [time].

Description

LSPM GR began to age.

Parameters

Parameter Name Parameter Meaning
[time] Indicates the time at which LSPM GR began to age.

Possible Causes

MPLS TE performed protocol-level GR or the system-level GR ended.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/GRAGINGEND

Message

LSPM/6/GRAGINGEND:LSPM finished RSVP aging at time [time].

Description

LSPM GR aging ended.

Parameters

Parameter Name Parameter Meaning
[time] Indicates the time at which LSPM GR finished aging.

Possible Causes

MPLS TE performed protocol-level GR or the system-level GR ended.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/3/GRAGINGFAIL

Message

LSPM/3/GRAGINGFAIL:An error occurred when the aging of an RSVP LSP was in process. (ErrorCode=[ULONG], IngressLsrId=[IPADDR], SessionTunnelId=[ULONG], LcalLspId=[ULONG])

Description

LSPM failed to delete the LSP that was not updated during aging process.

Parameters

Parameter Name Parameter Meaning
ErrorCode Indicates an error code.
IngressLsrId Indicates the ID of the ingress LSR.
SessionTunnelId Indicates the tunnel ID.
LcalLspId Indicates the ID of the local LSP.

Possible Causes

LSPM failed to delete LSP or notify the agent module during GR aging.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

LSPM/3/GTSMMSGSENDFAIL

Message

LSPM/3/GTSMMSGSENDFAIL:Failed to send GTSM policy. (Protocol=[STRING], Flag=[STRING], Address=[STRING])

Description

LSPM failed to send GTSM policy.

Parameters

Parameter Name Parameter Meaning
Protocol Name of the protocol sent the GTSM policy.
Flag Flag of the enable state.
Address Indicates the peer address.

Possible Causes

Internal causes of system malfunctions.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

LSPM/6/HASMOOTHBEGIN

Message

LSPM/6/HASMOOTHBEGIN:LSPM started smoothing at time [time]. (SmoothType=[ULONG])

Description

LSPM HA smoothing was started.

Parameters

Parameter Name Parameter Meaning
[time] Indicates the time when the LSPM starts traffic smoothing.
SmoothType Indicates the type of smoothing.

Possible Causes

Active/standby switchover.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/HASMOOTHEND

Message

LSPM/6/HASMOOTHEND:LSPM finished smoothing at time [time]. (SmoothType=[ULONG])

Description

LSPM HA smoothing was finished.

Parameters

Parameter Name Parameter Meaning
[time] Indicates the time when the LSPM ends traffic smoothing.
SmoothType Indicates the type of smoothing.

Possible Causes

Active/standby switchover.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/3/HASMOOTHFAIL

Message

LSPM/3/HASMOOTHFAIL:An error occurred when LSPM was processing smoothing. (ErrorCode=[ULONG1], IngressLsrId=[IPADDR], SessionTunnelId=[ULONG2], LocalLspId=[ULONG3], LspIndex=[ULONG4])

Description

LSPM smoothing failed. Four cases of the failure were as follows:

0: indicates the unknown error.

1: indicates that active LSP smoothing failed.

2: indicates that modifying LSP smoothing failed.

3: indicates that backing up LSP smoothing failed.

Parameters

Parameter Name Parameter Meaning
ErrorCode Indicates the errored code for smoothing failure.Four cases of the failure are as follows:
  • 0: indicates the unknown error.
  • 1: indicates that active LSP smoothing failed.
  • 2: indicates that modifying LSP smoothing failed.
  • 3: indicates that backing up LSP smoothing failed.
IngressLsrId Indicates the ID of the ingress LSR.
SessionTunnelId Indicates the session tunnel ID of a tunnel.
LocalLspId Indicates the local LSP ID of a tunnel.
LspIndex Indicates the LSP index.

Possible Causes

An error occurred in active board backup or the backup failed.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

LSPM/3/LSPMTEST

Message

LSPM/3/LSPMTEST: Notify resource info to RM failed.

Description

Failed to notify the resource information to RM.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

LSPM failed to notify the resource information to RM.

Procedure

  1. Check the interface between LSPM and RM.
  2. Collect log information and configuration information, and then contact technical support personnel.

LSPM/6/NOTIFYCSPFDSTEEVT

Message

LSPM/6/NOTIFYCSPFDSTEEVT:Notified CSPF of TE-Class change event.

Description

Constraint Shortest Path First (CSPF) was notified when TE-Class changed.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The TE-Class mapping table was changed.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/NOTIFYLSPMDSTEEVT

Message

LSPM/6/NOTIFYLSPMDSTEEVT:Notified LSPM of TE-Class change event. (Event=[STRING])

Description

Label Switched Path Management (LSPM) was notified when TE-Class changed.

Parameters

Parameter Name Parameter Meaning
Event Indicates the configuration event of TE-Class.

Possible Causes

The TE-Class mapping table was changed.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/NOTIFYRSVPDSTEEVT

Message

LSPM/6/NOTIFYRSVPDSTEEVT:Notified RSVP of TE-Class change event. (Event=[STRING])

Description

RSVP was notified when TE-Class changed.

Parameters

Parameter Name Parameter Meaning
Event Indicates the configuration event of TE-Class.

Possible Causes

The TE-Class mapping table was changed.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/PREEMPTIONRESULT

Message

LSPM/6/PREEMPTIONRESULT:The number of CR-LSPs to be preempted is [crlsp-number]. These LSPs would be down.

Description

The number of CR-LSPs to be occupied was displayed.

Parameters

Parameter Name Parameter Meaning
[crlsp-number] Indicates the number of CR-LSPs to be occupied.

Possible Causes

The LSP of higher priority took precedence on resources over that of lower priority.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/3/PROCESSTNLMSGFAILED

Message

LSPM/3/PROCESSTNLMSGFAILED:Cannot process HA tunnel message. (TunnelName=[STRING], EventType=[ULONG])

Description

Failed to process the HA tunnel message.

Parameters

Parameter Name Parameter Meaning
TunnelName Indicates the name of a tunnel.
EventType Indicates the type of a tunnel event.

Possible Causes

Processing of the tunnel event received from the tunnel interface module failed.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

LSPM/6/RECEIVEGRENDEVENT

Message

LSPM/6/RECEIVEGRENDEVENT:Receive GR end event from RM.

Description

The GR end event was received from the RM module.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The GR end event was received from the RM module.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/SENTBATCHBKUPOVERHA

Message

LSPM/6/SENTBATCHBKUPOVERHA:LSPM notified HA batch backup finished.

Description

LSPM notified HA that the batch backup was complete.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The batch backup was started after the slave board was inserted. After the batch backup was complete, LSPM notified HA.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/SENTSMOOTHFINISHHA

Message

LSPM/6/SENTSMOOTHFINISHHA:LSPM notified HA SMOOTH finished.

Description

LSPM notified HA that the data smoothing was complete.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Data smoothing was done after the active/standby switchover. When the data smoothing was complete, LSPM notified HA.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/SLOTPLUGINOUTEVENT

Message

LSPM/6/SLOTPLUGINOUTEVENT:Received slot event [event-id] from slot [slot-id].

Description

The event that the hot swap changed on the interface board was received.

Parameters

Parameter Name Parameter Meaning
[event-id] Indicates the type of the hot swap event on the interface.
[slot-id] Indicates the number of the slot where the interface board resides.

Possible Causes

The event that the hot swap changed on the interface board was received.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/4/SWITCH_TO_PT_FAIL

Message

LSPM/4/SWITCH_TO_PT_FAIL:Can not switch to protection tunnel, the protection tunnel is unavailable.

Description

Failed to switch the working tunnel to the protection tunnel because the protection tunnel was unavailable.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Switching the working tunnel to the protection tunnel cannot be performed because the protection tunnel was unavailable.

Procedure

  1. Configure the protection group and perform tunnel switching.
  2. Check the status of the protection tunnel.
  3. Collect log information and configuration information, and then contact technical support personnel.

LSPM/4/SWITCH_TO_PTUNN

Message

LSPM/4/SWITCH_TO_PTUNN:Switch to protection tunnel. (WorkTunnel is [Index])

Description

The working tunnel was switched to the protection tunnel.

Parameters

Parameter Name Parameter Meaning
[Index] indicates the index of a working tunnel.

Possible Causes

The working tunnel was switched to the protection tunnel.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/4/SWITCH_TO_WT_FAIL

Message

LSPM/4/SWITCH_TO_WT_FAIL:Can not switch to work tunnel, the work tunnel is unavailable.

Description

Failed to switch the protection tunnel to the working tunnel because the working tunnel was unavailable.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

Switching the protection tunnel to the working tunnel cannot be performed because the working tunnel was unavailable.

Procedure

  1. Configure the protection group and perform tunnel switching.
  2. Check the status of the working tunnel.
  3. Collect log information and configuration information, and then contact technical support personnel.

LSPM/4/SWITCH_TO_WTUNN

Message

LSPM/4/SWITCH_TO_WTUNN:Switch to work tunnel. (WorkTunnel is [Index])

Description

The protection tunnel was switched to the working tunnel.

Parameters

Parameter Name Parameter Meaning
[Index] indicates the index of a working tunnel.

Possible Causes

The protection tunnel was switched to the working tunnel.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/4/TRAPSUPPRESS

Message

LSPM/4/TRAPSUPPRESS:In the latest [value] seconds, the number of times that the trap of [feature-name] is suppressed is [times].

Description

Show the number of times that the trap is suppressed in the latest [value] seconds.

Parameters

Parameter Name Parameter Meaning
[value] Indicates the value of time in second.
[feature-name] Indicates the name of feature which the trap belongs to.
[times] Indicates the number of times that the trap is suppressed.

Possible Causes

This log message indicates a normal situation.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/6/TRIGGERRSVPCOUNT

Message

LSPM/6/TRIGGERRSVPCOUNT:The number of times that the LSPM triggered RSVP during GR was [time].

Description

The number of times that LSPM triggered RSVP during GR.

Parameters

Parameter Name Parameter Meaning
[time] The number of times that the LSPM triggered the RSVP during GR.

Possible Causes

MPLS TE performed protocol-level GR or the system-level GR ended.

Procedure

  1. This log message is informational only, and no action is required.

LSPM/3/TRIGGERRSVPFAIL

Message

LSPM/3/TRIGGERRSVPFAIL:Failed to trigger RSVP during GR. (ErrorCode=[ULONG], SessionTunnelId=[ULONG], LocalLspId=[ULONG], LspIndex=[ULONG])

Description

Failed to trigger RSVP during GR. Four cases of failure are as follows:

0: indicates the unknown error.

1: indicates that the corresponding LSP cannot be found.

2: indicates that the corresponding explicit path cannot be found.

3: indicates that the sending of the message failed.

Parameters

Parameter Name Parameter Meaning
ErrorCode Indicates the error code for failing in triggering the RSVP. The types of error codes are as follows:

0: indicates the unknown error.

1: indicates that the corresponding LSP cannot be found.

2: indicates that the corresponding explicit path cannot be found.

3: indicates that the sending of the message is failed.

SessionTunnelId Indicates the session tunnel ID of a tunnel.
LocalLspId Indicates the local LSP ID of a tunnel.
LspIndex Indicates the LSP index.

Possible Causes

An error occurred in active board backup or the backup failed.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

LSPM/6/TWOLABELFORSAMEFEC

Message

LSPM/6/TWOLABELFORSAMEFEC:Found different in-labels for the same FEC in LDP GR process. (NewLabel=[ULONG], OldLabel=[ULONG])

Description

Found different in-labels for the same FEC in LDP GR process.

Parameters

Parameter Name Parameter Meaning
NewLabel Indicates the first label.
OldLabel Indicates the second label.

Possible Causes

There are different in-labels for the same FEC.

Procedure

  1. Check the data of LSPM module to get the in-label information for the FEC.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5488

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next