No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IF

L2IF

L2IF/6/PORT_DOWN

Message

L2IF/6/PORT_DOWN:The status of port [port-name] turns DOWN.

Description

The status of the port [port-name] was switched to Down.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of a Layer 2 port.

Possible Causes

The status of the port [port-name] changed.

Procedure

  1. This log message indicates a normal situation, and no action is required.

L2IF/6/PORT_UP

Message

L2IF/6/PORT_UP:The status of port [port-name] turns UP.

Description

The status of the port [port-name] was switched to Up.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of a Layer 2 port.

Possible Causes

The status of the port [port-name] changed.

Procedure

  1. This log message indicates a normal situation, and no action is required.

L2IF/6/ROUTER_TO_SWITCH

Message

L2IF/6/ROUTER_TO_SWITCH:Start to switch port [port-name] from L3 mode to L2 mode.

Description

The Layer 3 port [port-name] was switched to a Layer 2 port.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of a Layer 3 port.

Possible Causes

The Layer 3 port [port-name] was switched to a Layer 2 port.

Procedure

  1. This log message indicates a normal situation, and no action is required.

L2IF/6/SLA_RCV_INDEX_BY_BAT

Message

L2IF/6/SLA_RCV_INDEX_BY_BAT:The slave control board obtains the L2 port index from the main control board through batch backup. The port name is [port-name].

Description

The slave board obtained the index of the Layer 2 port [port-name] from the main control board through batch backup.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of a Layer 2 port.

Possible Causes

The slave board allocated the index backed up in batches from the main control board to the Layer 2 port.

Procedure

  1. This log message indicates a normal situation, and no action is required.

L2IF/6/SLA_RCV_PORTINDEX

Message

L2IF/6/SLA_RCV_PORTINDEX:The slave control board obtains the L2 port index from the main control board through realtime backup. The port name is [port-name].

Description

The slave board obtained the index of the Layer 2 port [port-name] from the main board through real-time backup.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of a Layer 2 port.

Possible Causes

The slave board backed up the index of the specified Layer 2 port.

Procedure

  1. This log message indicates a normal situation, and no action is required.

L2IF/6/SWITCH_TO_ROUTER

Message

L2IF/6/SWITCH_TO_ROUTER:Start to switch port [port-name] from L2 mode to L3 mode.

Description

The Layer 2 port [port-name] was switched to a Layer 3 port.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of a Layer 2 port.

Possible Causes

The Layer 2 port [port-name] was switched to a Layer 3 port.

Procedure

  1. This log message is informational only, and no action is required.

L2IF/5/VCMP_MODIFY_VLAN_DESCRIPTION

Message

L2IF/5/VCMP_MODIFY_VLAN_DESCRIPTION: The global VLAN description has been changed by VCMP. (ModifiedVlanList=[ModifiedVlanList])

Description

The global VLAN descriptions were modified by VCMP.

Parameters

Parameter Name Parameter Meaning
ModifiedVlanList List of global VLANs whose descriptions were modified

Possible Causes

The global VLAN descriptions were modified by VCMP.

Procedure

  1. This log message is informational only, and no action is required.

L2IF/5/VCMP_MODIFY_VLAN_NAME

Message

L2IF/5/VCMP_MODIFY_VLAN_NAME: The global VLAN name has been changed by VCMP. (ModifiedVlanList=[ModifiedVlanList])

Description

The global VLAN names were modified by VCMP.

Parameters

Parameter Name Parameter Meaning

ModifiedVlanList

List of global VLANs whose names were modified

Possible Causes

The global VLAN names were modified by VCMP.

Procedure

  1. This log message is informational only, and no action is required.

L2IF/5/VCMP_ADD_VLAN

Message

L2IF/5/VCMP_ADD_VLAN: The global VLAN configuration has been changed by VCMP. (AddedVlanList=[STRING])

Description

The global VLAN configuration was changed by VCMP.

Parameters

Parameter Name Parameter Meaning
AddedVlanList Created VLAN list

Possible Causes

The global VLAN configuration was changed by VCMP.

Procedure

  1. This log is informational only, and no action is required.

L2IF/5/VCMP_DEL_VLAN

Message

L2IF/5/VCMP_DEL_VLAN: The global VLAN configuration has been changed by VCMP. (DeletedVlanlist=[STRING])

Description

The global VLAN configuration was changed by VCMP.

Parameters

Parameter Name Parameter Meaning
DeletedVlanlist Deleted VLAN list

Possible Causes

The global VLAN configuration was changed by VCMP.

Procedure

  1. This log is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5612

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next