No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mDNS

mDNS

MDNS_INFO_LOG_MDNS_SET_ACL_FAILED

Message

MDNS/4/MDNS_INFO_LOG_MDNS_SET_ACL_FAILED(l):Set ACL failed.(Command: [STRING])

Description

An mDNS command failed to be delivered because of an ACL processing failure.

Parameters

Parameter Name Parameter Meaning
[STRING]

Indicates the command that triggers this log:

  • mdns gateway enable
  • undo mdns gateway enable
  • mdns relay enable
  • undo mdns relay enable

Possible Causes

ACL resources were insufficient or an error occurred in ACL processing on the device.

Procedure

  1. Process this log based on the triggering command.

    • If the log is triggered by the mdns gateway enable or mdns relay enable command configuration, run the display acl resource command to check whether ACL resources are sufficient. If ACL resources are insufficient, release ACL resources and run the display acl resource command to check whether ACL resources are released successfully. If resources are sufficient, the physical chip fails to deliver the command. Go to step 2.
    • If the log is triggered by the undo mdns gateway enable or undo mdns relay enable command configuration, an error occurs in ACL processing on the device. Go to step 2.

  2. Collect log and configuration information, and contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5491

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next