No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SMLK

SMLK

SMLK/4/MTLK_STATUS_LOG

Message

SMLK/4/MTLK_STATUS_LOG:The state of monitor link group [mtlkgroup-id] changed to [mtlkgroup-state].

Description

The status of the monitor link group changes.

Parameters

Parameter Name Parameter Meaning
[mtlkgroup-id] MTLK group ID.
[mtlkgroup-state] MTLK group status
  • DOWNLINKCLOSE
  • DOWNLINKOPEN

Possible Causes

The MTLK status changes.

Procedure

  1. This log is normal operation information and does not need to be processed.

SMLK/4/SMLK_CMD_LOG

Message

SMLK/4/SMLK_CMD_LOG:The [config-type] configuration on Smart Link group [smlkgroup-id] may cause traffic interruption.

Description

The configuration traffic of the smart link group may be interrupted.

Parameters

Parameter Name Parameter Meaning
[smlkgroup-id] SMLK group ID
[config-type] configuration type
  • LOCK
  • FORCE

Possible Causes

The smart-link{ force | lock } command is used to switch traffic between active and standby links.

Procedure

  1. This log is normal operation information and does not need to be processed.

SMLK/4/SMLK_FLUSH_LOG

Message

SMLK/4/SMLK_FLUSH_LOG:The tag [vlan-id] flush packet from port [port-name] was dealt successfully.

Description

The flush packets received from a port are processed.

Parameters

Parameter Name Parameter Meaning
[vlan-id] VLAN ID
[port-name] port name

Possible Causes

The flush packets received from a port are processed.

Procedure

  1. This log is normal operation information and does not need to be processed.

SMLK/4/SMLK_FLUSH_LOG

Message

SMLK/4/SMLK_FLUSH_LOG:Port [port name] was attacked by flush message.

Description

The smart link port receive two flush packets within 5 seconds,it may be a flush attack.

Parameters

Parameter Name Parameter Meaning
[port name] Port name

Possible Causes

The smart link port receive two flush packets within 5 seconds.

Procedure

  1. This log is normal operation information and does not need to be processed.

SMLK/4/SMLK_STATUS_LOG

Message

SMLK/4/SMLK_STATUS_LOG:The state of Smart link group [smlkgroup-id] changed to [smlkgroup-state].

Description

The status of the smart link group changes.

Parameters

Parameter Name Parameter Meaning
[smlkgroup-id] SMLK group ID
[smlkgroup-state] SMLK group status
  • IDLE
  • INIT
  • MASTER
  • SLAVE

Possible Causes

The SMLK status changes.

Procedure

  1. This log is normal operation information and does not need to be processed.

SMLK/6/SMLK_EVENT_LOG

Message

SMLK/6/SMLK_EVENT_LOG:Port [STRING]'s ifpdt memory has been set to [STRING] group [ULONG] as [STRING] in [STRING].

Description

Port memory is cleared.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the port name.
[STRING] Indicates the smart link group name or monitor link group name.
[ULONG] Indicates the index of the smart link group or monitor link group.
[STRING] Indicates the interface status: master or slave for a smart link, and uplink or downlink for a monitor link.
[STRING] Indicates the function information.

Possible Causes

Port memory is cleared.

Procedure

  1. This log message is informational only, and no action is required.

SMLK/6/SMLK_EVENT_LOG

Message

SMLK/6/SMLK_EVENT_LOG:Port [STRING]'s ifpdt memory has been set to [STRING] group [ULONG] as [STRING] in [STRING].

Description

A memory block is used for the smart link group data.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the interface name.
[STRING] Indicates the smart link group name or monitor link group name.
[ULONG] Indicates the smart link group index or monitor link group index.
[STRING] Indicates the interface status: master or slave for a smart link, and uplink or downlink for a monitor link.
[STRING] Indicates the function information.

Possible Causes

A memory block is used for the smart link group data.

Procedure

  1. This log message is informational only, and no action is required.

SMLK/4/SMLK_ERROR_LOG

Message

SMLK/4/SMLK_ERROR_LOG:[STRING].

Description

During Smart Link configuration, error configurations or operation failures are recorded.

Parameters

Parameter Name Parameter Meaning
[STRING] Error configurations or operation failures are recorded.

Possible Causes

  1. Flush packets of Smart Link cannot be received due to insufficient ACL resources.

Procedure

  1. Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
  2. Run the display current-configuration command to check the current configuration on the switch.
  3. Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.

    • Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
    • Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.

  4. If the fault persists, collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

SMLK/6/SMLK_FSM_LOG

Message

SMLK/6/SMLK_FSM_LOG:The Smart link group [ULONG]'s current state is [STRING], triggering event is [STRING].

Description

The smart link group status changes.

Parameters

Parameter Name Parameter Meaning
[ULONG] Indicates the index of the smart link group.
[STRING] IDLE/INIT/MASTER/SLAVE
[STRING] Smart Link Enable/Smart Link Disable/Master Link Down/Master Link Up/Slave Link Down/Slave Link Up/Add Master Port/Add Slave Port/Delete Master Port/Delete Slave Port/Undo Lock/Undo Force Lock/Force Manual/Timer Expired/Unkown cause
[STRING] Indicates the interface name.
[STRING] Indicates the smart link group name.
[ULONG] Indicates the index of the smart link group.
[STRING] Indicates the interface status: master or slave.
[STRING] Indicates the function name.

Possible Causes

The following events may occur:
  • Smart Link Enable
  • Smart Link Disable
  • Master Link Down
  • Master Link Up
  • Slave Link Down
  • Slave Link Up
  • Add Master Port
  • Add Slave Port
  • Delete Master Port
  • Delete Slave Port
  • Undo Lock
  • Undo Force Lock
  • Force Manual
  • Timer Expired
  • Unknown cause

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5499

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next