No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ERPS (G.8032)

ERPS (G.8032)

ERPS/5/PORTADDRINGFAILED

Message

ERPS/5/PORTADDRINGFAILED:The interface failed to be added to the ring. (Interface=[STRING], RingID=[ULONG])

Description

The interface failed to be added to the ERPS ring.

Parameters

Parameter Name Parameter Meaning
Interface Interface name.
RingID ID of the ERPS ring.

Possible Causes

The lower layer resources of devices were exhausted.

Procedure

  1. Check whether the lower layer resources of devices were exhausted and plan the service capacity of devices properly.

ERPS/5/PORTFWDSTATUS

Message

ERPS/5/PORTFWDSTATUS:The forwarding status of the interface is changed. (RingID=[ULONG], InterfaceName=[STRING], CurrentStatus=[STRING])

Description

The forwarding status of the interface added to the ERPS ring was changed.

Parameters

Parameter Name Parameter Meaning
RingID Ring ID.
InterfaceName Interface name.
CurrentStatus Current forwarding status of an interface.

Possible Causes

The ERPS forwarding status of an interface was changed from forwarding to blocked or from blocked to forwarding.

Procedure

  1. This log message is informational only, and no action is required.

ERPS/5/PORTSIGNALSTATUS

Message

ERPS/5/PORTSIGNALSTATUS:The signal status of the interface is changed. (RingID=[ULONG], InterfaceName=[STRING], CurrentStatus=[STRING])

Description

The signal status of an interface added to an ERPS ring changed. The signal status includes physical status and protocol status of an interface.

Parameters

Parameter Name Parameter Meaning
RingID Ring ID
InterfaceName Interface name
CurrentStatus Current signal status of an interface

Possible Causes

The physical status or protocol status of an interface added to the ERPS ring changed.

Procedure

  1. Check that whether the physical status or protocol status of the interface changes.

ERPS/5/TOPOCHANGE

Message

ERPS/5/TOPOCHANGE:The ring topology changed. (RingID=[ULONG])

Description

The ERPS ring topology changed.

Parameters

Parameter Name Parameter Meaning
RingID ID of an ERPS ring

Possible Causes

The ERPS ring topology changed.

Procedure

  1. Check that whether status of interfaces on nodes on the RRPP ring changes.

ERPS/5/TOPOCHANGENOTIFYVPLS

Message

ERPS/5/TOPOCHANGENOTIFYVPLS: ERPS informs VPLS of topology change. (Interface=[STRING], VlanID=[ULONG])

Description

ERPS notified VPLS of its topology change.

Parameters

Parameter Name Parameter Meaning
Interface Interface name
VlanID VLAN ID

Possible Causes

The ERPS ring topology changed and sent packets to notify the connected VPLS network.

Procedure

  1. This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 6251

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next