No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MFIB

MFIB

MFIB/4/CNT_OVER_MAX

Message

MFIB/4/CNT_OVER_MAX:The muticast forword table counter [current-value] exceeds the max valid value [max-value]. It should be [updated-value]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The counter of the multicast forwarding table reached the maximum count, which should be updated.

Parameters

Parameter Name Parameter Meaning
[current-value] Indicates the current count of the counter.
[max-value] Indicates the maximum count of the counter.
[updated-value] Indicates the value to be updated.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

The counter of the multicast forwarding table reached the maximum count.

Procedure

  • Run the display diagnostic-information command to save the command output, and contact technical support personnel.

MFIB/4/DOWNNUM_EXCEED_RESTORE

Message

MFIB/4/DOWNNUM_EXCEED_RESTORE:The number of downstream interfaces in the entry ([source-address], [group-address])'s downstream list falls below the set limit. The limit on the number of downstream interfaces is [OIF_LIMIT]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The number of downstream interfaces in an MFIB entry fell below the set limit.

Parameters

Parameter Name Parameter Meaning
[source-address] Source address
[group-address] Group address
[OIF_LIMIT] Limit on the number of downstream interfaces in an MFIB entry.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn VPN name
FileLine Name of the source code file and the line number of this log message

Possible Causes

The number of downstream interfaces in an MFIB entry fell below the set limit.

Procedure

  • This log message is informational only, and no action is required.

MFIB/4/ENTRY_EXCEED_RESTORE

Message

MFIB/4/ENTRY_EXCEED_RESTORE:The number of entries falls below the limit. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The number of MFIB entries fell below the limit.

Parameters

Parameter Name Parameter Meaning
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn VPN name
FileLine Name of the source code file and the line number of this log message

Possible Causes

The number of MFIB entries fell below the limit.

Procedure

  • This log message is informational only, and no action is required.

MFIB/4/ENTRY_OVER_MAX

Message

MFIB/4/ENTRY_OVER_MAX:Total number of route entry for all VPN [current-entry] has reached or beyond the limit: [limit-entry] on IO board. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The route entries of all VPN instances on the interface reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[current-entry] Indicates the number of current route entries.
[limit-entry] Indicates the maximum number of route entries supported by the device.
Protocol Indicates the flag of IPv4 or IPv6. The values are protocol=IPv4 and Protocol=IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

The number of route entries reached the maximum value.

Procedure

  • If the system processing capability limit is reached, contact technical support personnel

MFIB/4/FREE_MID_TO_MAX

Message

MFIB/4/FREE_MID_TO_MAX: MID allocation fails because the number of MIDs allocated to instances [current-number] has reached the upper limit: [max-number]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

Failed to allocate an MID because the number of allocated MIDs of all instances reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[current-number] Indicates the number of current allocated MIDs.
[max-number] Indicates the permitted maximum number of allocated MIDs.
Protocol Indicates the flag of IPv4 or IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number.

Possible Causes

The number of allocated MIDs of all instances reached the upper limit.

Procedure

  1. Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MFIB/4/GR_END

Message

MFIB/4/GR_END:GR end ([STRING]). (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The MFIB enters the GR final state.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the identification of VPN.
Protocol Indicates the flag of IPv4 or IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number.

Possible Causes

GR is complete after the master-slave switchover.

Procedure

  • Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MFIB/4/GR_START

Message

MFIB/4/GR_START:GR start ([STRING]). (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The MFIB enters the GR initialization state.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the identification of VPN.
Protocol Indicates the flag of IPv4 or IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

GR begins after the master-slave switchover.

Procedure

  • Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MFIB/4/INVALID_OIF_NUM

Message

MFIB/4/INVALID_OIF_NUM:The entry ([source-address], [group-address])'s OIF num([current-oif-number]) exceeds downstream limit([limit-oif-number]).(Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The total number of the outgoing interfaces of the current entries reached the maximum number allowed by the device.

Parameters

Parameter Name Parameter Meaning
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[current-oif-number] Indicates the total number of the outgoing interfaces of the current entries.
[limit-oif-number] Indicates the maximum number of interfaces supported by the device.
Protocol Indicates the flag of IPv4 or IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

The total number of the outgoing interfaces of the current entry reached the maximum number allowed by the device.

Procedure

  • Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MFIB/4/REACH_TO_MAX

Message

MFIB/4/REACH_TO_MAX:Current route number [route-number] reached the route limit: [route-limit]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The current routing entries reached the maximum value supported by the device.

Parameters

Parameter Name Parameter Meaning
[route-number] Number of routing entries.
[route-limit] Maximum number of routing entries supported by the device.
Protocol Indicates the flag of IPv4 or IPv6.
Vpn VPN name.
FileLine Name of the source code file and the line number of this log message.

Possible Causes

The current routing entries reached the maximum value supported by the device.

Procedure

  • If services are not affected, no action is required.
  • If services are affected and the routing entries belong to the public network, run the multicast forwarding-table route-limit limit command in the system view to increase the maximum number of routing entries that can be maintained in the multicast forwarding table. If the routing entries belong to a VPN, run the multicast forwarding-table route-limit limit command in the VPN instance view to increase the maximum number.
  • If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.

MFIB/4/REACH_TO_MAX_ENTRY_IO

Message

MFIB/4/REACH_TO_MAX_ENTRY_IO:The number of multicast forwarding entries reached the upper threshold. The number of existing entries in the instance [current-instance-entry], the maximum number of entries in the instance [current-instance-limit], the number of existing entries on a device [current-device-entry], the maximum number of entries on a device [current-device-limit], resources consumed by forwarding entries [entry-resource], maximum resources [max-resource], remaining resoruces [remain-resource]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The number of multicast forwarding entries on the interface board reached the maximum limit.

Parameters

Parameter Name Parameter Meaning
[current-instance-entry] Number of multicast forwarding entries of the instance.
[current-instance-limit] Maximum number of multicast forwarding entries of the instance.
[current-device-entry] Number of multicast forwarding entries of the device.
[current-device-limit] Maximum number of multicast forwarding entries of the device.
[entry-resource] Resources occupied by the forwarding entries.
[max-resource] Maximum resources.
[remain-resource] Remaining resources.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn VPN instance name.
FileLine Name of the source code file and the line number of this log message.

Possible Causes

The number of multicast forwarding entries on the interface board reached the maximum limit.

Procedure

  • The processing capability limit of the system is reached. To resolve this issue, you are advised to Collect log information and configuration information, and then contact technical support personnel.

MFIB/4/REACH_TO_MAX_ENTRY_MAIN

Message

MFIB/4/REACH_TO_MAX_ENTRY_MAIN:The number of multicast forwarding entries reached the upper threshold. The number of existing entries in the instance [current-instance-entry], the maximum number of entries in the instance [current-instance-limit], the number of existing entries on a device [current-device-entry], the maximum number of entries on a device [current-device-limit]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The number of multicast forwarding entries on the MPU reached the maximum limit.

Parameters

Parameter Name Parameter Meaning
[current-instance-entry] Number of multicast forwarding entries of the instance.
[current-instance-limit] Maximum number of multicast forwarding entries of the instance.
[current-device-entry] Number of multicast forwarding entries of the device.
[current-device-limit] Maximum number of multicast forwarding entries of the device.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn VPN instance name.
FileLine Name of the source code file and the line number of this log message.

Possible Causes

The number of multicast forwarding entries on the MPU reached the maximum limit.

Procedure

  • The processing capability limit of the system is reached. To resolve this issue, you are advised to Collect log information and configuration information, and then contact technical support personnel.

MFIB/4/REACH_TO_MAX_LIMIT

Message

MFIB/4/REACH_TO_MAX_LIMIT:Can not add entry ([source-address], [group-address]). Total number of route entry [current-route-number] for all VPN has reached or beyond the limit: [limit-route-number]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The current route entries reached the maximum value supported by the device.

Parameters

Parameter Name Parameter Meaning
[source-address] Indicates the source address.
[group-address] Indicates the address of a group.
[current-route-number] Indicates the total number of current routes.
[limit-route-number] Indicates the maximum routes supported by the device.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

The current route entries reached the maximum value supported by the device.

Procedure

  • The processing capability limit of the system is reached. To resolve this issue, you are advised to Collect log information and configuration information, and then contact technical support personnel.

MFIB/4/SET_LMT_LESS_CRRNT

Message

MFIB/4/SET_LMT_LESS_CRRNT:The new setting route limit [new-max-entry] is less than current entry number [current-entry]. This change will take effect after resetting multicast forwarding-table. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The newly set the maximum number of entries was smaller than the number of current entries. The new maximum value will take effect after the multicast forwarding table is cleared.

Parameters

Parameter Name Parameter Meaning
[new-max-entry] Indicates the maximum number of entries in the multicast forwarding table.
[current-entry] Indicates the number of current entries in the multicast forwarding table.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

The newly set the maximum number of entries was smaller than the number of current entries.

Procedure

  • Check that the newly configured maximum number of entries is correct.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5647

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next