No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSSM

CSSM

CSSM/4/CFGINVALID

Message

CSSM/4/CFGINVALID:Failed to configure CSS port [OCTET1], and the port may be unavailable. Please reset slot[OCTET2] and configure the CSS port again.

Description

An error occurred when a user attempted to configure service ports as physical member ports of a CSS port. The service ports became unavailable.

Parameters

Parameter Name Parameter Meaning
OCTET1 Indicates the interface number.
OCTET2 Indicates a slot ID.

Possible Causes

An active/standby switchover occurred or the active MPU was removed before the CSS port configuration was complete.

Procedure

  1. Run the port interface enable command again to configure service ports as physical member ports again.
    • If the configuration succeeds, no action is required.
    • If the configuration fails, go to step 2.
  2. Run the reset slot command to reset the corresponding card and then configure service ports as physical member ports.
    • If the configuration succeeds, no action is required.
    • If the configuration fails, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.

CSSM/4/DOWN_DELAY

Message

CSSM/4/DOWN_DELAY: The CSS link changed from Up to Down and then to Up within the configured delay of 500 ms. (CSS port=[STRING], delay time=[ULONG] ms)

Description

The CSS link changed from Up to Down and then to Up within 500 ms.

Parameters

Parameter Name Parameter Meaning
CSS port Indicates the name of the CSS member port triggering the delayed CSS link-Down report.
delay time Indicates the delay in reporting the CSS link-Down event. Within the delay time, traffic passing through this CSS link will be discarded.

Possible Causes

The CSS link changed to Down and then to Up within 500 ms.

Procedure

  1. Check whether there was only this log displayed in a short period.
    • If so, the CSS link flapped. No action is required.
    • If not, go to step 2.
  2. Check whether the cable and optical module on the port specified in this log are installed properly.
    • If so, go to step 4.
    • If not, go to step 3.
  3. Install the cable and optical module properly and then check whether this log is still displayed.
    • If so, go to step 4.
    • If not, the fault has been rectified.
  4. Replace the cable and optical module and then check whether this log is still displayed.
    • If so, go to step 5.
    • If not, the fault has been rectified.
  5. The CSS port of this device became faulty or a software error occurred on the device. You need to collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.

CSSM/3/FASTUPGRADEFAIL

Message

CSSM/3/FASTUPGRADEFAIL: CSS fast upgrade failed. Reason: [OCTET].

Description

Fast upgrade of a CSS failed.

Parameters

Parameter Name Parameter Meaning
OCTET Indicates the cause of the CSS fast upgrade failure.

Possible Causes

  • Cause 1: The registration of some boards failed. Board ID=**
  • Cause 2: The configuration restoration of some boards failed. Board ID=**

Procedure

  1. If boards of the old version can register but boards of the new version cannot, check whether the new version supports these boards.
    • If so, run the reboot fast command.
    • If not, replace this board.
  2. If some boards still cannot register after the version is upgraded to the new version, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.

CSSM/6/FASTUPGRADEROLLBACK

Message

CSSM/6/FASTUPGRADEROLLBACK: CSS fast upgrade fails, causing chassis[SLOT] to roll back. The reason is: [STRING].

Description

The chassis [SLOT] rolled back because CSS fast upgrade failed.

Parameters

Parameter Name Parameter Meaning
SLOT Indicates a chassis ID.
STRING Indicates the rollback reason.

Possible Causes

  • Cause 1: The master chassis expired (expiry of the master chassis).
  • Cause 2: Registration of the standby chassis's board expired (expired registration of the standby chassis board).
  • Cause 3: Configuration restoration of the standby chassis's board expired (expired configuration restoration of the standby chassis board).

Procedure

  1. This log and the log CSSM/3/FASTUPGRADEFAIL will be displayed together. For details about processing them, see CSSM/3/FASTUPGRADEFAIL.

CSSM/4/CSSSTANDBY

Message

CSSM/4/CSSSTANDBY: This cluster CSS compete result is standby.

Description

This switch is elected as a standby switch when the CSS is set up or becomes a standby switch after a master/slave switchover is performed.

Parameters

Parameter Name Parameter Meaning
N/A N/A

Possible Causes

When the CCS is set up, this switch is elected as a standby switch; when the system performs a master/slave switchover or this switch restarts, this switch becomes a standby switch.

Procedure

  1. This log message is informational only, and no action is required.

CSSM/4/CSSMASTER

Message

CSSM/4/CSSMASTER:This cluster CSS compete result is master.

Description

This switch is elected as the master switch when the CSS is set up or becomes the master switch after a master/slave switchover is performed.

Parameters

Parameter Name Parameter Meaning
N/A N/A

Possible Causes

When the CCS is set up, this switch is elected as the master switch; when the system performs a master/slave switchover or this switch restarts, this switch becomes the master switch.

Procedure

  1. This log message is informational only, and no action is required.

CSSM/4/PORTAVAILABLE

Message

CSSM/4/PORTAVAILABLE:CSS port [OCTET] has been available.

Description

The CSS port is available.

Parameters

Parameter Name Parameter Meaning
[OCTET] CSS port number

Possible Causes

The CSS link is detected normal.

Procedure

  1. This log message is informational only, and no action is required.

CSSM/4/PORTNOAVAILABLE

Message

CSSM/4/PORTNOAVAILABLE:CSS port [OCTET] has been unavailable. Reason: [OCTET].

Description

The CSS port is unavailable.

Parameters

Parameter Name Parameter Meaning
[OCTET] CSS port number
[OCTET] Reason that the CSS port is unavailable

Possible Causes

The CSS port is Down.

Procedure

  1. Remove and then install the cable of the unavailable CSS port.
  2. If the fault persists, the cable, optical module, or CSS card may fail. Replace the related hardware.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5454

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next