No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
6OVER4

6OVER4

6OVER4/4/CAMPNUM_UNCAMP

Message

6OVER4/4/CAMPNUM_UNCAMP:The compatible number of the 6over4 tunnel module is not compatible.

Description

The compatible number of the 6over4 tunnel module was incompatible.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The data structure of the 6over4 tunnel module was changed, causing its compatible number to become incompatible with the current version.

Procedure

  1. This log message indicates a normal situation, and no action is required.

6OVER4/4/MAXNUM_UNCAMP

Message

6OVER4/4/MAXNUM_UNCAMP:The number of tunnels [number1] configured on the old main control board is greater than the maximum number of tunnels [number2] that can be configured on the new main control board.

Description

The number of the tunnels configured on the old main board was greater than the maximum number of tunnels that can be configured on the new main control board.

Parameters

Parameter Name Parameter Meaning
[number1] Indicates the number of tunnels configured on the old main control board.
[number2] Indicates the number of tunnels configured on the new main control board.

Possible Causes

The specifications of the new version were smaller. As a result, the number of configured tunnels on the old main control board was greater than the maximum number of tunnels that could be configured on the new main control board.

Procedure

  1. Check specifications and configurations to make sure that the specifications of the new main control board are larger than the configurations of the old main control board.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 6223

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next