No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM

RM

RM/3/ADDHOSTRT_TBL_LMT

Message

RM/3/ADDHOSTRT_TBL_LMT:The number of routes in URT reached the maximum when a direct route was added to URT. (DestinationAddress=[STRING])

Description

The number of routes in the routing table reached the upper limit when a direct route was added to the routing table.

Parameters

Parameter Name Parameter Meaning
DestinationAddress Indicates the destination address.

Possible Causes

Excessive routes were added.

Procedure

  1. Purchase a new license.
  2. Confirm the network requirements, and check whether the configuration is correct.

RM/6/CONFIRM_N

Message

RM/6/CONFIRM_N:The operation of [STRING]: A user input "No" to cancel the operation.

Description

When a specific operation needed to be confirmed, a user entered N.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the specific operation that needs to be confirmed by a user. The types of operations include the following:
  • erase all multicast static routes: Delete all multicast static routes.
  • erase all public IPv4 static routes and their configurations: Delete all public IPv4 static routes and the configurations of the routes.
  • erase all IPv4 static routes in this instance and their configurations: Delete all IPv4 static routes that belong to the instance and delete the configurations of the routes.
  • erase all public IPv6 static routes and their configurations: Delete all public IPv6 static routes and the configurations of the routes.
  • erase all IPv6 static routes in this instance and their configurations: Delete all IPv6 static routes that belong to the instance and delete the configurations of the routes.
  • erase all IPv4 static routes track bfd session: Delete all IPv4 static routes tracing BFD session status and delete the configurations of the routes.
  • erase information about specific routing counters: Delete information about the specified routing counter.

Possible Causes

When static routes and related configurations or specified route statistics were deleted on the RM, a user input N to cancel the operation.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/CONFIRM_TIMEOUT

Message

RM/6/CONFIRM_TIMEOUT:The operation of [STRING]: A user did not input any word in [ULONG]s, and the system automatically exited from the operation.

Description

The system automatically quit the operation if a user input nothing within the specified maximum number of seconds to confirm the operation.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the specific operation that needs to be confirmed by a user. The types of operations include the following:
  • erase all multicast static routes: Delete all multicast static routes.
  • erase all public IPv4 static routes and their configurations: Delete all public IPv4 static routes and the configurations of the routes.
  • erase all IPv4 static routes in this instance and their configurations: Delete all IPv4 static routes that belong to the instance and delete the configurations of the routes.
  • erase all public IPv6 static routes and their configurations: Delete all public IPv6 static routes and the configurations of the routes.
  • erase all IPv6 static routes in this instance and their configurations: Delete all IPv6 static routes that belong to the instance and delete the configurations of the routes.
  • erase all IPv4 static routes track bfd session: Delete all IPv4 static routes tracing BFD session status and delete the configurations of the routes.
  • erase information about specific routing counters: Delete information about the specified routing counter.
[ULONG] indicates the maximum number of seconds taken by a user to confirm the operation.

Possible Causes

When the RM module deleted static routes and related configurations or deleted specified route statistics, a user did not input Y to proceed with or N to cancel the operation within the permitted period of time specified by [ULONG]. Therefore, the system quit the confirmation and did not proceed with the operation by default.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/CONFIRM_Y

Message

RM/6/CONFIRM_Y:The operation of [STRING]: A user input "Yes" to confirm the operation.

Description

When a specific operation needed to be confirmed, a user entered Y.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the specific operation that needs to be confirmed by a user. The types of operations include the following:
  • erase all multicast static routes: Delete all multicast static routes.
  • erase all public IPv4 static routes and their configurations: Delete all public IPv4 static routes and the configurations of the routes.
  • erase all IPv4 static routes in this instance and their configurations: Delete all IPv4 static routes that belong to the instance and delete the configurations of the routes.
  • erase all public IPv6 static routes and their configurations: Delete all public IPv6 static routes and the configurations of the routes.
  • erase all IPv6 static routes in this instance and their configurations: Delete all IPv6 static routes that belong to the instance and delete the configurations of the routes.
  • erase all IPv4 static routes track bfd session: Delete all IPv4 static routes tracing BFD session status and delete the configurations of the routes.
  • erase information about specific routing counters: Delete information about the specified routing counter.

Possible Causes

When static routes and related configurations or specified route statistics were deleted on the RM, a user input Y to proceed with the operation.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/ENABLE_1MFIB

Message

RM/6/ENABLE_1MFIB:Million FIB feature was enabled.

Description

The million FIB feature was enabled.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The million FIB feature was enabled.

Procedure

  1. This log message is informational only, and no action is required.

RM/3/GET_VRF_TBLID_FAL

Message

RM/3/GET_VRF_TBLID_FAL:Failed to obtain the table ID of the VPN instance [instance-id].

Description

Failed to obtain the routing table ID of the VPN instance.

Parameters

Parameter Name Parameter Meaning
[instance-id] Indicates the ID of an instance.

Possible Causes

Failed to obtain the routing table ID of the VPN instance.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/HANDLE_ADD_IPMSG

Message

RM/6/HANDLE_ADD_IPMSG:RM IM received the event of adding an IP address. (IpAddress=[string], Mask=[string], Interface=[string])

Description

RM received the event of adding an IP address.

Parameters

Parameter Name Parameter Meaning
IpAddress Indicates an IP address in dotted decimal notation.
Mask Indicates a mask in dotted decimal notation.
Interface Indicates the type and the name of an interface.

Possible Causes

The IP module reported the event of adding an IP address.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/HANDLE_ADDED_IPMSG

Message

RM/6/HANDLE_ADDED_IPMSG:RM IM processed the event of adding an IP address successfully. (IpAddress=[string], Mask=[string], Interface=[string])

Description

RM responded to the event of adding an IP address successfully.

Parameters

Parameter Name Parameter Meaning
IpAddress Indicates an IP address in dotted decimal notation.
Mask Indicates a mask in dotted decimal notation.
Interface Indicates the type and the name of an interface.

Possible Causes

The IP module reported the event of adding an IP address, and RM processed the event successfully.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/HANDLE_DEL_IPMSG

Message

RM/6/HANDLE_DEL_IPMSG:RM IM received the event of deleting an IP address. (IpAddress=[string], Mask=[string], Interface=[string])

Description

RM received the event of deleting an IP address.

Parameters

Parameter Name Parameter Meaning
IpAddress Indicates an IP address in dotted decimal notation.
Mask Indicates a mask in dotted decimal notation.
Interface Indicates the type and the name of an interface.

Possible Causes

The IP module reported the event of deleting an IP address.

Procedure

  1. This log message is informational only, and no action is required.

RM/6/HANDLE_DELED_IPMSG

Message

RM/6/HANDLE_DELED_IPMSG:RM IM processed the event of deleting an IP address successfully. (IpAddress=[string], Mask=[string], Interface=[string])

Description

RM responded to the event of deleting an IP address successfully.

Parameters

Parameter Name Parameter Meaning
IpAddress Indicates an IP address in dotted decimal notation.
Mask Indicates a mask in dotted decimal notation.
Interface Indicates the type and the name of an interface.

Possible Causes

The IP module reported the event of deleting an IP address, and RM processed the event successfully.

Procedure

  1. This log message is informational only, and no action is required.

RM/4/INST_RCH_MAX_RT_LMT

Message

RM/4/INST_RCH_MAX_RT_LMT:The number of routes in [vpn-instance-name] was [current-number], which reached or exceeded the maximum value [max-value]. (InstanceId=[ULONG], AcceptOrRejectFlag=[STRING])

Description

The number of routes in a specific VPN instance reached or exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[current-number] Indicates the current number of routes.
[max-value] Indicates the maximum number of routes.
InstanceId Indicates the ID of a VPN instance.
AcceptOrRejectFlag Indicates the flag representing whether it is allowed or rejected to add routes. The values are as follows:
  • Accept: indicates that adding routes is allowed.

  • Reject: indicates that adding routes is rejected.

Possible Causes

The number of routes in a specific VPN instance reached or exceeded the upper limit.

Procedure

  1. Run the display ip routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this VPN instance.
  2. Analyze the source of each route and check whether the number of current routes in the VPN instance meets the requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.

    • If so, go to Step 5.
    • If not, run the routing-table limit number { alert-percent | simply-alert } command to re-configure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.

RM/4/INST_RCH_MAX_RT6_LMT

Message

RM/4/INST_RCH_MAX_RT6_LMT:The number of routes in IPv6 [vpn-instance-name] was [current-number], which reached or exceeded the maximum value [max-value]. (InstanceId=[ULONG], AcceptOrRejectFlag=[STRING])

Description

The number of routes in a specific IPv6 VPN instance reached or exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of an IPv6 VPN instance.
[max-value] Indicates the maximum number of routes.
[current-number] Indicates the current number of routes.
InstanceId Indicates the ID of an IPv6 VPN instance.
AcceptOrRejectFlag Indicates the flag representing whether it is allowed or rejected to add routes. The values are as follows:
  • Accept: indicates that adding routes is allowed.

  • Reject: indicates that adding routes is rejected.

Possible Causes

The number of routes in a specific IPv6 VPN instance reached or exceeded the upper limit.

Procedure

  1. Run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this IPv6 VPN instance.
  2. Analyze the source of each route and check whether the number of current routes in the IPv6 VPN instance meets the requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the IPv6 VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.

    • If so, go to Step 5.
    • If not, run the routing-table limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.

RM/4/INST_RCH_MAXPFXLMT

Message

RM/4/INST_RCH_MAXPFXLMT:The number of prefixes in [vpn-instance-name] was [current-number], which reached the maximum value [maximum-value]. (InstanceId=[ULONG], AddFlag=[STRING])

Description

This log message is displayed when the number of route prefixes exceeds the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[current-number] Indicates the number of current route prefixes.
[maximum-value] Indicates the permitted maximum number of route prefixes.
InstanceId Indicates the instance ID.
AddFlag Indicates whether the route can be added:
  • Accept: The route can be added.
  • Deny: The route cannot be added.

Possible Causes

This log message is displayed when the number of route prefixes exceeds the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Procedure

  1. Check whether the permitted maximum number of route prefixes needs to be increased.

RM/4/INST_RCH_MAXPFXLMT6

Message

RM/4/INST_RCH_MAXPFXLMT6:The number of prefixes in IPv6 [vpn-instance-name] was [current-number], which reached the maximum value [maximum-value]. (InstanceId=[ULONG], AddFlag=[STRING])

Description

This log message is displayed when the number of IPv6 route prefixes exceeds the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of an IPv6 VPN instance.
[current-number] Indicates the number of current route prefixes.
[maximum-value] Indicates the permitted maximum number of route prefixes.
InstanceId Indicates the instance ID.
AddFlag Indicates whether the route can be added:
  • Accept: The route can be added.
  • Deny: The route cannot be added.

Possible Causes

This log message is displayed when the number of route prefixes exceeds the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Procedure

  1. Check whether the permitted maximum number of route prefixes needs to be increased.

RM/4/IPV4_DEFT_RT_CHG

Message

RM/4/IPV4_DEFT_RT_CHG:IPV4 default Route is changed. (ChangeType=[STRING], InstanceId=[USHORT], Protocol=[STRING], ExitIf=[STRING], Nexthop=[STRING], Neighbour=[STRING], Preference=[ULONG], Label=[STRING], Metric=[ULONG])

Description

The default IPv4 route changed.

Parameters

Parameter Name Parameter Meaning

ChangeType

Indicates the type of route change:
  • Add: A route is added.
  • Delete: A route is deleted.
  • Modify: A route is modified.

InstanceId

Indicates the instance ID.

Protocol

Indicates the protocol.

ExitIf

Indicates the outgoing interface.

Nexthop

Indicates the next hop.

Neighbour

Indicates the neighbor.

Preference

Indicates the route preference.

Label

Indicates the route label.

Metric

Indicates the route metric.

Possible Causes

1. A default route is deleted.

2. The attributes, which can be delivered to the RM, of a default route, is modified.

Procedure

  1. This log message is informational only, and no action is required.

RM/4/IPV6_DEFT_RT_CHG

Message

RM/4/IPV6_DEFT_RT_CHG:IPV6 default Route is changed. (ChangeType=[STRING], InstanceId=[USHORT], Protocol=[STRING], ExitIf=[STRING], Nexthop=[STRING], Neighbour=[STRING], Preference=[ULONG], Label=[STRING], Metric=[ULONG])

Description

The default IPv6 route changed.

Parameters

Parameter Name Parameter Meaning
ChangeType Indicates the type of route change:
  • Add: A route is added.
  • Delete: A route is deleted.
  • Modify: A route is modified.
InstanceId Indicates the instance ID.
Protocol Indicates the protocol.
ExitIf Indicates the outgoing interface.
Nexthop Indicates the next hop.
Neighbour Indicates the neighbor.
Preference Indicates the route preference.
Label Indicates the route label.
Metric Indicates the route metric.

Possible Causes

1. A default route is added or deleted.

2. The attributes, which can be delivered to the RM, of a default route, is modified.

Procedure

  1. This log message is informational only, and no action is required.

RM/3/IPV6_RCH_MAX_PFX

Message

RM/3/IPV6_RCH_MAX_PFX:The number of IPv6 prefixes reached the maximum prefix limit [max-prefix-limit].

Description

The number of IPv6 prefixes in the routing table reached the maximum value.

Parameters

Parameter Name Parameter Meaning
[max-prefix-limit] Indicates the maximum number of IPv6 prefixes.

Possible Causes

The number of IPv6 prefixes reached the upper limit when a route was added.

Procedure

  1. Confirm the network requirements, and check whether the configuration is correct.
  2. Purchase a new license file if the configuration is correct and a lot of routes are required.

RM/3/LDP_SESSION_STATE

Message

RM/3/LDP_SESSION_STATE:RM received the status [ldp-session] of the LDP session on the [interface-name].

Description

RM received the status of the LDP session on an interface.

Parameters

Parameter Name Parameter Meaning
[ldp-session] Indicates an LDP session.
[interface-name] Indicates the name of an interface

Possible Causes

RM received the status of the LDP session on an interface.

Procedure

  1. This log message is informational only, and no action is required.

RM/3/LMTNUM_BGER_MAXPAF

Message

RM/3/LMTNUM_BGER_MAXPAF:RM rejected the setting of routing table limit for instance (ID) [instance-id] because the limit number [limit-route-number] was greater than the maximum route limit defined in PAF [paf-route-limit].

Description

Failed to set the maximum number of routes for the instance because the number of routes exceeded the maximum value defined in the PAF file.

Parameters

Parameter Name Parameter Meaning
[instance-id] Indicates the ID of an instance.
[limit-route-number] Indicates the maximum number of routes.
[paf-route-limit] Indicates the maximum number of routes defined in the PAF file.

Possible Causes

The number of VPN routes exceeded the maximum value defined in the PAF file.

Procedure

  1. Confirm the network requirements, and check whether the configuration is correct.
  2. Purchase a new license file if the configuration is correct and a lot of routes are required.

RM/3/MAX_RPM_RCH

Message

RM/3/MAX_RPM_RCH:The number of elements of the routing policy reached the maximum when an AS-PATH list filter was created.

Description

When the AS_Path filter was created, the number of elements of the routing policy exceeded the maximum value.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The number of elements of the routing policy exceeded the maximum value.

Procedure

  1. Delete useless AS_Path filters.

RM/3/NEW_PFX_NO_FREE_IDX

Message

RM/3/NEW_PFX_NO_FREE_IDX:No idle index was available for the new IP prefix node when a prefix list filter was created for the specified prefix list name and instance.

Description

No idle index was available for a new IP prefix node when a prefix list was created for the given prefix list name and the instance.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

1. The largest sequence number was greater than 65535.

2. The sequence number of the prefix list was smaller than 65535.

3. The sequence number of the temporary node was 0.

Procedure

  1. Check the number of configured IP prefix lists.
  2. Check the configurations of IP prefix lists.

RM/3/NO_FREE_IDX_FOR_PFX

Message

RM/3/NO_FREE_IDX_FOR_PFX:No idle index was available for the new IPv6-prefix node when a prefix list filter was created.

Description

When the prefix list was created, no idle index value can be used to create an IPv6 prefix node.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

When the prefix list was created, no idle index value could be used.

Procedure

  1. Delete useless prefix list indexes.

RM/3/NOTIFY_ISIS_MSG

Message

RM/3/NOTIFY_ISIS_MSG:RM notified ISIS of the status [ldp-session] of the LDP session on the [interface-name].

Description

RM notified IS-IS of the status of the LDP session on an interface.

Parameters

Parameter Name Parameter Meaning
[ldp-session] Indicates an LDP session.
[interface-name] Indicates the name of an interface

Possible Causes

RM notified IS-IS of the status of the LDP session on an interface.

Procedure

  1. Record the tunnel ID and the number of slots defined in the PAF file, that is, the value of PAF_LCS_SYSTEM_TOTAL_SLOT_NUM.

RM/3/NOTIFY_OSPF_MSG

Message

RM/3/NOTIFY_OSPF_MSG:RM notified OSPF of the status [ldp-session] of the LDP session on the [interface-name].

Description

RM notified OSPF of the status of the LDP session on an interface.

Parameters

Parameter Name Parameter Meaning
[ldp-session] Indicates an LDP session.
[interface-name] Indicates the name of an interface

Possible Causes

RM notified OSPF of the status of the LDP session on an interface.

Procedure

  1. This log message is informational only, and no action is required.

RM/4/PFX_MAX_NUM_CLEARED

Message

RM/4/PFX_MAX_NUM_CLEARED:The number of [table_name] prefixes in public instance reduced to [current_prefix_number], which was below the maximum value [maximum_prefix_number].

Description

The number of route prefixes fell below that supported by the system.

Parameters

Parameter Name Parameter Meaning
[table_name] Indicates an IPv4 or IPv6 routing table.
[current_prefix_number] Indicates the number of route prefixes in the routing table.
[maximum_prefix_number] Indicates the maximum number of route prefixes supported by the system.

Possible Causes

Cause 1:

The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes.

Cause 2:

The maximum number of route prefixes supported by the system was increased or the limit on the number of route prefixes was deleted.

Procedure

  1. This alarm message is informational only, and no action is required.

RM/4/PFX_MID_NUM_CLEARED

Message

RM/4/PFX_MID_NUM_CLEARED:The number of [table_name] prefixes in public instance reduced to [current_prefix_number], which was below the threshold value [threshold_number].

Description

The number of route prefixes fell below that supported by the system.

Parameters

Parameter Name Parameter Meaning
[table_name] Indicates an IPv4 or IPv6 routing table.
[current_prefix_number] Indicates the number of route prefixes in the routing table.
[threshold_number] Indicates the maximum number of route prefixes supported by the system.

Possible Causes

Cause 1:

The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes.

Cause 2:

The threshold of route prefixes supported by the system was increased or the limit on the number of route prefixes was deleted.

Procedure

  1. This alarm message is informational only, and no action is required.

RM/4/PFXNUM_EXCD_WARN

Message

RM/4/PFXNUM_EXCD_WARN:The number of prefixes in [vpn-instance-name] was [current-number], which exceeded the alarm threshold [threshold]. (InstanceId=[ULONG], MaxPrefixLimit=[ULONG])

Description

This log message is displayed when the number of route prefixes exceeds the alarm threshold but does not exceed the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[current-number] Indicates the number of current route prefixes.
[threshold] Indicates the alarm threshold for the number of route prefixes.
InstanceId Indicates the instance ID.
MaxPrefixLimit Indicates the permitted maximum number of route prefixes.

Possible Causes

This log message is displayed when the number of route prefixes exceeds the alarm threshold but does not exceed the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Procedure

  1. Check whether the permitted maximum number of route prefixes or alarm threshold needs to be increased.

RM/4/PFXNUM_EXCD_WARN6

Message

RM/4/PFXNUM_EXCD_WARN6:The number of prefixes in IPv6 [vpn-instance-name] was [current-number], which exceeded the alarm threshold [threshold-value]. (InstanceId=[ULONG], MaxPrefixLimit=[ULONG])

Description

The number of prefixes for the specified IPv6 private network instance exceeded the trap threshold.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of an IPv6 VPN instance.
[current-number] Indicates the current number of prefixes.
[threshold-value] Indicates the value of the alarm threshold.
InstanceId Indicates the ID of an IPv6 VPN instance.
MaxPrefixLimit Indicates the maximum number of prefixes.

Possible Causes

The number of prefixes for the specified IPv6 private network instance exceeded the trap threshold.

Procedure

  1. Run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number of prefixes in this IPv6 VPN instance.
  2. Analyze the source of each prefix and check whether the number of current prefixes in the IPv6 VPN instance meets the requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of prefixes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the IPv6 VPN instance view and run the display this command to check the configuration of prefix limit to check whether the set alarm threshold of private prefixes is proper.

    • If so, go to Step 5.
    • If not, run the prefix limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.

RM/3/PTCL_ADD_RT_MEM_SHT

Message

RM/3/PTCL_ADD_RT_MEM_SHT:The system memory was insufficient when a specified route was added to the routing table according to the protocol ID [protocol-id].

Description

When a route was added to the routing table according to the protocol ID, the system memory was not enough.

Parameters

Parameter Name Parameter Meaning
[protocol-id] Indicates the ID of a protocol.

Possible Causes

When a route was added to the routing table according to the protocol ID, the system memory was not enough.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

RM/4/RCH_ALLVRF_RT_LMT

Message

RM/4/RCH_ALLVRF_RT_LMT:The number of VPN-Instances routes reached the upper limit [paf-vpn-route-limit] in the system when the upper limit of routes in the routing table in all instances was checked.

Description

The number of VPN routes reached the upper limit in the entire system when the maximum number of routes was checked.

Parameters

Parameter Name Parameter Meaning
[paf-vpn-route-limit] Indicates the maximum number of VPN routes defined in the PAF file.

Possible Causes

The number of VPN routes reached the upper limit in the entire system when the maximum number of routes in the routing table was checked.

Procedure

  1. Check the total number of VPN routes.

RM/4/RCH_ALLVRF6_RT_LMT

Message

RM/4/RCH_ALLVRF6_RT_LMT:The number of VPN6-Instances routes reached the upper limit [paf-vpn-route-limit] in the system when the upper limit of routes in the IPv6 routing table in all instances was checked.

Description

The number of IPv6 VPN routes reached the upper limit in the entire system when the maximum number of routes in the IPv6 routing table was checked.

Parameters

Parameter Name Parameter Meaning
[paf-vpn-route-limit] Indicates the maximum number of VPN routes defined in the PAF file.

Possible Causes

The number of IPv6 VPN routes reached the upper limit in the entire system when the maximum number of routes in the IPv6 routing table was checked.

Procedure

  1. Check the total number of IPv6 VPN routes.

RM/4/RCH_MIGP_RT_LMT

Message

RM/4/RCH_MIGP_RT_LMT:The number of routes in MIGP routing table reached the upper limit [migp-route-limit].

Description

The number of routes in the MIGP routing table reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[migp-route-limit] Indicates the maximum number of routes in the MIGP routing table.

Possible Causes

The number of routes in the MIGP routing table reached the upper limit.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

RM/4/RCH_PUB_RT_LMT

Message

RM/4/RCH_PUB_RT_LMT:The number of IPv4 routes for the public network reaches the upper limit [paf-pub-limit], when the number of IPv4 routes in the routing table is checked.

Description

The number of IPv4 public network routes reached the upper limit when the number of IPv4 routes in the routing table was checked.

Parameters

Parameter Name Parameter Meaning
[paf-pub-limit] Maximum number of IPv4 public network routes defined in the PAF

Possible Causes

The number of IPv4 public network routes reached the upper limit.

Procedure

  1. Check whether routes are correct.
  2. Delete invalid routes.
  3. Check whether the configuration meets networking requirements.
  4. Collect log information and configuration information, and then contact technical support personnel.

RM/4/RCH_PUB6_RT_LMT

Message

RM/4/RCH_PUB6_RT_LMT:The number of IPv6 routes for the public network reaches the upper limit [paf-pub-limit], when the number of IPv6 routes in the routing table is checked.

Description

The number of IPv6 public network routes reached the upper limit when the number of IPv6 routes in the routing table was checked.

Parameters

Parameter Name Parameter Meaning
[paf-pub-limit] Maximum number of IPv6 public network routes defined in the PAF

Possible Causes

The number of IPv6 public network routes reached the upper limit.

Procedure

  1. Check whether routes are correct.
  2. Delete invalid routes.
  3. Check whether the configuration meets networking requirements.
  4. Collect log information and configuration information, and then contact technical support personnel.

RM/4/ROUTERID_CHANGE

Message

RM/4/ROUTERID_CHANGE:The router ID is [STRING]. (InstanceID=[USHORT])

Description

The router ID changed.

Parameters

Parameter Name Parameter Meaning
STRING Router ID
InstanceID Instance ID

Possible Causes

The public network router ID changed.

Procedure

  1. If the router ID becomes 0, check whether the change affects routing protocols and prevent routing interruptions.

RM/3/RPM_ROUT_MAX_LMT

Message

RM/3/RPM_ROUT_MAX_LMT:The number of policies in the route policy management reached maximum limit when a prefix list filter was created for the specified prefix list name and instance.

Description

The number of elements in the routing policy management reached the upper limit when a prefix list was created for the given prefix list name and the instance.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The number of configured prefix lists exceeded the allowable maximum number.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, run the display ip ip-prefix command in the user view to check the configured IPv4 address prefix lists, and Collect log information and configuration information, and then contact technical support personnel.

RM/4/RT_NUM_EXCD_WARN

Message

RM/4/RT_NUM_EXCD_WARN:The number of routes in [vpn-instance-name] was [current-number], which exceeded the alarm threshold [threshold-value]. (InstanceId=[ULONG], MaximumRouteLimit=[ULONG])

Description

The number of routes in a specific VPN instance reached or exceeded the alarm threshold of this VPN instance.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[threshold-value] Indicates the value of the alarm threshold.
InstanceId Indicates the ID of a VPN instance.
MaximumRouteLimit Indicates the maximum number of routes.

[current-number]

Indicates the actual number of routes.

Possible Causes

The number of routes in a specific VPN instance reached or exceeded the alarm threshold of this VPN instance.

Procedure

  1. Run the display ip routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this VPN instance.
  2. Analyze the source of each route and check whether the number of current routes in the VPN instance meets the actual requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.

    • If so, go to Step 5.
    • If not, run the routing-table limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.

RM/4/RT6_NUM_EXCD_WARN

Message

RM/4/RT6_NUM_EXCD_WARN:The number of routes in IPv6 [vpn-instance-name] was [current-number], which exceeded the alarm threshold [threshold-value]. (InstanceId=[ULONG], MaximumRouteLimit=[ULONG])

Description

The number of routes for the specified IPv6 private network instance exceeded the upper limit of the trap threshold.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of an IPv6 VPN instance.
[threshold-value] Indicates the value of the trap threshold.
InstanceId Indicates the ID of an IPv6 VPN instance.
MaximumRouteLimit Indicates the maximum number of routes.

[current-number]

Indicates the actual number of routes.

Possible Causes

The number of routes for the specified IPv6 private network instance exceeded the upper limit of the trap threshold.

Procedure

  1. Run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this IPv6 VPN instance.
  2. Analyze the source of each route and check whether the number of current routes in the IPv6 VPN instance meets the requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the IPv6 VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.

    • If so, go to Step 5.
    • If not, run the routing-table limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.

RM/3/SMTH_ADDRT_MAX_LMT

Message

RM/3/SMTH_ADDRT_MAX_LMT:The number of routes in the routing table reached the maximum when a route was added to the URT smoothly. (DestinationAddress=[STRING])

Description

The number of routes in the routing table reached the upper limit when a route was added to the routing table in smooth backup mode.

Parameters

Parameter Name Parameter Meaning
DestinationAddress Indicates the destination address.

Possible Causes

The routing table was full when a route was added during smooth backup.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

RM/3/SNDMSG_MEM_SHORT_FAL

Message

RM/3/SNDMSG_MEM_SHORT_FAL:The system memory was insufficient when the IP message was written to the message queue.

Description

The system memory was not enough when the IP message was written to the message queue.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

1. The memory was not enough.

2. Excessive IP messages existed.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

RM/4/SYS_RCH_MAX_RT_LMT

Message

RM/4/SYS_RCH_MAX_RT_LMT:The number of routes reached upper limit [paf-route-limit] in the whole system when the route limit in the routing table was checked.

Description

The number of routes exceeded the upper limit in the entire system when the maximum number of routes in the routing table was checked.

Parameters

Parameter Name Parameter Meaning
[paf-route-limit] Indicates the maximum number of routes defined in the PAF file.

Possible Causes

The number of routes exceeded the upper limit in the entire system when the maximum number of routes in the routing table was checked.

Procedure

  1. Check whether routes are correct.
  2. Delete invalid routes.
  3. Check whether the configuration meets networking requirements.
  4. Collect log information and configuration information, and then contact technical support personnel.

RM/4/SYS_RCH_MAX6_RT_LMT

Message

RM/4/SYS_RCH_MAX6_RT_LMT:The number of IPv6 routes reached the upper limit [paf-ipv6-route-limit] in the system when the upper limit of routes in the IPv6 URT was checked.

Description

The number of IPv6 routes reached the upper limit in the entire system when the maximum number of routes in the IPv6 URT was checked.

Parameters

Parameter Name Parameter Meaning
[paf-ipv6-route-limit] Indicates the maximum number of IPv6 routes defined in the PAF file.

Possible Causes

The number of IPv6 routes exceeded the upper limit in the entire system when the maximum number of IPv6 routes in the routing table was checked.

Procedure

  1. Check the maximum number of IPv6 routes.

RM/4/URT_RCH_MAX_IPPRFX

Message

RM/4/URT_RCH_MAX_IPPRFX:The number of prefixes reached the maximum prefix limit [max-prefix-limit] in the routing table. (RoutingTableId=[ULONG])

Description

The number of prefixes in the routing table reached the maximum value.

Parameters

Parameter Name Parameter Meaning
[max-prefix-limit] Indicates the maximum number of IP prefixes.
RoutingTableId Indicates the ID of a routing table.

Possible Causes

The number of prefixes reached the upper limit when a route was added.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 6222

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next