No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SHELL

SHELL

SHELL/4/CHANGE_PASSWORD_FAIL

Message

SHELL/4/CHANGE_PASSWORD_FAIL:Failed to change the password. (Ip=[STRING], VpnName=[STRING], UserName=[STRING], Times=[ULONG], FailedReason=[STRING])

Description

A user that logged in to the device using Telnet or the console interface failed to change the password.

Parameters

Parameter Name Parameter Meaning
Ip User IP address
VpnName VPN instance name
UserName User name
Times Number of password change attempts
FailedReason Reason for the password change failure

Possible Causes

Changing the password failed.

Procedure

  • Use the correct old password and specify a valid new password to complete the change without exceeding the maximum number of change attempts (10).
  • If the maximum number of password change attempts has been reached, log out and log in to the device again using Telnet or the console interface. Then complete the password change without exceeding the maximum number of change attempts (10).

SHELL/6/CMDCONFIRM_CHANGEPWDCHOOSEINFO

Message

SHELL/6/CMDCONFIRM_CHANGEPWDCHOOSEINFO:The user chose [STRING] when deciding whether to change password.(User=[STRING], IP=[STRING], VpnName=[STRING])

Description

The user decided to change the password or not.

Parameters

Parameter Name Parameter Meaning

User

Indicates the user name.

IP

Indicates the IP address of the user.

VpnName

Indicates the VPN instance name.

Possible Causes

When the user was asked whether to change an old password, the choice (Y or N) made by the user was recorded.

Procedure

  • This log message is informational only, and no action is required.

SHELL/5/CMDRECORD

Message

SHELL/5/CMDRECORD:Recorded command information. (Task=[string], Ip=[string], VpnName=[STRING], User=[string], AuthenticationMethod="[STRING]", Command="[string]")

Description

The user command was recorded.
  • If the command is successfully run, only the SHELL/5/CMDRECORD log is recorded.
  • If the command is not successfully run, the SHELL/5/CMDRECORD and SHELL/5/CMDRECORDFAILED logs are recorded.

Parameters

Parameter Name Parameter Meaning
Task Indicates the task name. For details about the task name, see description of the display cpu-usage command output.
Ip Indicates an IP address.
When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface, asterisks (**) are used to indicate the IP address.
NOTE:

In a CSS, if the device fails to obtain the user IP address, in a scenario where the AAA authentication mode is used, chassis ID/slot ID is used to indicate the IP address.

VpnName Indicates the name of a VPN instance.
User Indicates the name of a user.

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

AuthenticationMethod Indicates the authentication mode.
Command Indicates a command.

Possible Causes

The user command was recorded.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/5/CMDRECORDFAILED

Message

SHELL/5/CMDRECORDFAILED:Recorded command information. (Task=[string], Ip=[string], VpnName=[STRING], User=[string], AuthenticationMethod="[STRING]", Command="[string]", Result=[string])

Description

Information about the command execution failure was recorded.

Parameters

Parameter Name Parameter Meaning
Task Indicates the task name.
Ip Indicates the IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName Indicates a VPN instance name.
User Indicates the user name.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

AuthenticationMethod Indicates the user authentication mode.
Command Indicates the command that is executed.
Result Indicates a command execution result. The available options are ExecutionFailure and AuthenticationFailure.

Possible Causes

Executing the command failed.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/6/CMDCONFIRM_NOPROMPT

Message

SHELL/6/CMDCONFIRM_NOPROMPT:Record command information. (Task=[Task], IP=[IP], VpnName=[VpnName], User=[User], Command="[Command]", UserInput=[UserInput])

Description

The system logged confirm information of interactive commands.

Parameters

Parameter Name Parameter Meaning
Task Indicates the task name, such as VTn and JOB.
IP Indicates an IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName Indicates a VPN instance name.
User Indicates user name.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

Command Indicates the command executed by the user.
UserInput Indicates users' selection. The value is Y or N.

Possible Causes

Users ran interactive commands.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/6/CMDCONFIRM_RECORD

Message

SHELL/6/CMDCONFIRM_RECORD: When being asked whether to execute the command "[command]", the user chose [Y/N].(Task=[Task], IP=[IP], VpnName=[VpnName], User=[User])

Description

The user chose Y or N to decide whether to disable the command "[command]".

Parameters

Parameter Name Parameter Meaning
command Command line
Y/N A user can decide whether to disable the command "[command]":
  • Y: Disable the command "[command]".
  • N: Do not disable the command "[command]".
Task Task ID
Ip IP address

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName VPN instance name
User User name

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

Possible Causes

When you intended to disable the command "[command]", the system prompted you to decide whether to execute.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/6/CMDCONFIRM_UNIFORMRECORD

Message

SHELL/6/CMDCONFIRM_UNIFORMRECORD:Record command information. (Task=[Task], IP=[IP], VpnName=[VpnName], User=[User], Command="[Command]", PromptInfo="[PromptInfo]", UserInput=[UserInput])

Description

The system logged confirm information of interactive commands.

Parameters

Parameter Name Parameter Meaning
Task Indicates the task name, such as VTn and JOB.
IP Indicates an IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName Indicates a VPN instance name.
User Indicates user name.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

Command Indicates the command executed by the user.
PromptInfo Indicates the prompt output on terminals.
UserInput Indicates users' selection. The value is Y or N.

Possible Causes

Users ran interactive commands.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/6/DISPLAY_CMDRECORD

Message

SHELL/6/DISPLAY_CMDRECORD: Recorded display command information. (Task=[string], Ip=[string], VpnName=[STRING], User=[string], AuthenticationMethod="[STRING]", Command="[string]")

Description

The user display command was recorded.

Parameters

Parameter Name Parameter Meaning
Task Indicates the ID of a task.
Ip Indicates an IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName Indicates the name of a VPN instance.
User Indicates the name of a user.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name.

AuthenticationMethod Indicates the authentication mode.
Command Indicates a command.

Possible Causes

The user command was recorded.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/4/LOGINFAILED

Message

SHELL/4/LOGINFAILED:Failed to login. (Ip=[Ip], UserName=[UserName], Times=[Times], AccessType=[AccessType], VpnName=[VpnName])

Description

Failed to login.

Parameters

Parameter Name Parameter Meaning
Ip Indicates an IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

UserName Indicates the name of a user.

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

Times Indicates the number of failed logins.
AccessType Indicates the type of logins.
VpnName Indicates a VPN instance name.

Possible Causes

The user name or password of the user was incorrect.

Procedure

  1. Check whether the user name and password are correct.

    • If either the user name or the password is incorrect, enter the correct user name or password.
    • If the user name and password are correct, Collect log information and configuration information, and then contact technical support personnel.

SHELL/5/LOGIN

Message

SHELL/5/LOGIN: The user succeeded in logging in to [UserIndex]. (UserType=[STRING], UserName=[STRING], AuthenticationMethod="[STRING]", Ip=[STRING], VpnName=[STRING])

Description

The user logged in.

Parameters

Parameter Name Parameter Meaning
UserIndex Indicates the index of a user.
UserType Indicates the type of a user.
UserName Indicates the name of a user.

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, the value of this parameter is empty.

AuthenticationMethod Indicates the authentication mode.
Ip Indicates the IP address of a user.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, the value of this parameter is empty.

VpnName Indicates the vpn-instance name.

Possible Causes

The user logged in.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/4/LOGIN_FAIL_FOR_INPUT_TIMEOUT

Message

SHELL/4/LOGIN_FAIL_FOR_INPUT_TIMEOUT:Failed to log in due to timeout.(Ip=[STRING], UserName=[STRING], Times=[ULONG], AccessType=[STRING], VpnName=[STRING])

Description

After entering a user name or password, a user failed to log in because of a timeout.

Parameters

Parameter Name Parameter Meaning

Ip

Indicates an IP address.

UserName

Indicates user name.

Times

Indicates the number of failed logins.

AccessType

Indicates the type of logins.

VpnName

Indicates a VPN instance name.

Possible Causes

A timeout occurred after the user name or password was entered.

Procedure

  • Perform login again.

SHELL/5/LOGOUT

Message

SHELL/5/LOGOUT: The user succeeded in logging out of [UserIndex]. (UserType=[STRING], UserName=[STRING], Ip=[STRING], VpnName=[STRING])

Description

The user logged out.

Parameters

Parameter Name Parameter Meaning
UserIndex Indicates the index of a user.
UserType Indicates the type of a user.
UserName Indicates the name of a user.
Ip Indicates the IP address of a user.
VpnName Indicates the vpn-instance name.

Possible Causes

The user logged out.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/4/OVERWRITE_EXEC

Message

SHELL/4/OVERWRITE_EXEC:The user chose [Y/N] when deciding whether to overwrite the existing file.

Description

The user decides whether to overwrite the existing file before running this command.

Parameters

Parameter Name Parameter Meaning
[Y/N] prompts the user to confirm the action.

Possible Causes

The user decides whether to overwrite the existing file before running this command.

Procedure

  1. This log message is informational only, and no action is required.

SHELL/5/SETPASS_FAIL_FIRSTLOGIN

Message

SHELL/5/SETPASS_FAIL_FIRSTLOGIN: Failed to set password when login firstly.

Description

A user failed to set a password during the first login.

Parameters

Parameter Name Parameter Meaning
None. None.

Possible Causes

The user set a whose complexity did not meet the requirement during the first login.

Procedure

  1. Check whether the complexity of the password meets the requirement.

    • If yes, go to Step 2.
    • If no, enter a new password whose complexity meets the requirement. If you fail to set a new password, go to Step 2.

  2. Collect log information and configuration information, and then contact technical support personnel.

SHELL/5/TIMEOUT

Message

SHELL/5/TIMEOUT:[user-name] login from [ip-address] is time out.

Description

The event that the user did not do anything in specified time was record.

Parameters

Parameter Name Parameter Meaning
user-name Username.
ip-address IP address

Possible Causes

The user did not do anything in specified time

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5460

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next