No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TPLMNG

TPLMNG

TPLMNG/3/CMDEXECFAIL

Message

TPLMNG/3/CMDEXECFAIL: Failed to execute the command. (Command="[STRING]", Reason=[STRING])

Description

The command failed to be executed.

Parameters

Parameter Name Parameter Meaning
Command Indicates the command that failed to be executed.
Reason Indicates the failure cause.

Possible Causes

When the commit as all command was executed for batch operation, topology collection was not completed or other operations were performed on some ASs. As result, the batch operation failed on these ASs.

Procedure

  1. Run the display uni-mng commit-result command to find the ASs on which the batch operation failed.
  2. Run the commit as command to deliver service configurations to these ASs again.
  3. If the fault persists, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5536

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next