No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSPF

CSPF

CSPF/3/IGP_NWLSA_INFONULL

Message

CSPF/3/IGP_NWLSA_INFONULL: Received a Network-LSA with null information from IGP [IgpName].

Description

A network-LSA event that did not contain any network-LSA information was received from the IGP protocol.

Parameters

Parameter Name Parameter Meaning
[IgpName] Indicates the name of an IGP protocol, such as IS-IS and OSPF.

Possible Causes

Network LSA event does not contain any network lsa information.

Procedure

  1. 1. Verify IGP database.

    • If IGP is OSPF use display ospf lsdb opaque-link and display ospf lsdb opaque-area command.

    • If IGP is ISIS use display isis traffic-eng link and display isis traffic-eng network command.

  2. 2. Reset OSPF or IS-IS process.

CSPF/3/IGP_RID_INFONULL

Message

CSPF/3/IGP_RID_INFONULL: Received an invalid router ID from IGP.

Description

The invalid router ID was received from the IGP protocol.

Parameters

None.

Possible Causes

Invalid Router ID from IGP.

Procedure

  1. 1. Verify IGP database.

    • If IGP is OSPF use display ospf lsdb opaque-link and display ospf lsdb opaque-area command.

    • If IGP is ISIS use display isis traffic-eng link and display isis traffic-eng network command.

  2. 2. Reset OSPF or IS-IS process.

CSPF/4/MAX_NODE_REACH

Message

CSPF/4/MAX_NODE_REACH: Reached the maximum number of nodes of CSPF.

Description

The number of CSPF nodes reached the maximum.

Parameters

None.

Possible Causes

CSPF cannot add more link nodes in TEDB.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

CSPF/4/MAX_NWLSA_REACH

Message

CSPF/4/MAX_NWLSA_REACH: Reached the maximum number of Network-LSAs of CSPF.

Description

The number of network-LSAs reached the maximum.

Parameters

None.

Possible Causes

CSPF cannot add more network-lsa nodes in TEDB.

Procedure

  1. Increase the upper limit of CSPF network-LSAs in PAF.

CSPF/4/MAX_SRLG_REACH

Message

CSPF/4/MAX_SRLG_REACH: The number of SRLGs reached the upper limit of CSPF.

Description

The number of SRLGs reached the upper limit of CSPF.

Parameters

None.

Possible Causes

CSPF cannot add more SRLG in TEDB since the number of SRLGs configured has reached the maximum value that CSPF supports.

Procedure

  1. If better service is needed, contact with Huawei engineer to increase corresponding PAF value.

CSPF/3/MEM_FAIL

Message

CSPF/3/MEM_FAIL: Failed to allocate memory.

Description

Failed to allocate memory.

Parameters

None.

Possible Causes

Memory was insufficient, causing the memory allocation failure.

Procedure

  1. Use display memory-usage command and free some memory by cutting down topology or configuration.

CSPF/3/PATH_ERROR

Message

CSPF/3/PATH_ERROR: Failed to calculate the path due to [PathError].

Description

Path computation fails.

Parameters

Parameter Name Parameter Meaning
[PathError]
Path error string, including:
  • configuration of two interface address

  • configuration of next hop after

  • configuration of next hop after egress

  • configuration of egress node directly as strict is not permitted

  • configuration of next hop after egress node is not permitted

Possible Causes

Path computation fails.

Procedure

  1. Check explicit path using display explicit-path and verify path for errors specified in log message and correct explicit path configuration.

CSPF/3/Q_ERROR

Message

CSPF/3/Q_ERROR: Failed to fill in [EventName] queue.

Description

Failed to fill in event queue.

Parameters

Parameter Name Parameter Meaning
[EventName] Failed event information. CSPF_LSPM or CSPF_RM.

Possible Causes

Failed to fill in event queue. Maybe the queue is full or the system function is wrong.

Procedure

  1. Wait for a while.
  2. Cancel and re-configure CSPF.

CSPF/3/TIME_FAIL

Message

CSPF/3/TIME_FAIL:Failed to create the [STRING] timer. (ReturnValue=[ULONG])

Description

Failed to create the timer used for detecting a link.

Parameters

Parameter Name Parameter Meaning
STRING Timer name.
ReturnValue Indicates the value returned by the function used for creating a timer.

Possible Causes

Create timer fails.

Procedure

  1. Run the display mpls te cspf tedb node command to check for inactive links.
  2. Reset OSPF or ISIS.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5463

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next