No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MD

MD

MD/6/ADD_PRIV_PIM

Message

MD/6/ADD_PRIV_PIM:In VPN instance "[vpn-instance-name]", PIM initialization on the MTI has been done successfully. (FlCode=[STRING][ULONG])

Description

Succeeded in configuring PIM on the interface of the private network instance.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

PIM is configured on the private network interface.

Procedure

  • This log message is informational only, and no action is required.

MD/6/ADD_SHARP

Message

MD/6/ADD_SHARP:In VPN instance "[vpn-instance-name]", a Default MDT [share-group] was added successfully. (FlCode=[STRING][ULONG])

Description

Succeeded in adding a shared group to the instance.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[share-group] Indicates the address of a shared group.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

A shared group was added to the instance of the private network.

Procedure

  • This log message is informational only, and no action is required.

MD/4/BND_MTI

Message

MD/4/BND_MTI:In VPN instance "[vpn-instance-name]", failed to bind MTI [interface-name]. (FlCode=[STRING][ULONG])

Description

Failed to bind the MTI to the instance.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the name of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The physical interface changed.

Procedure

  1. Run the multicast-domain share-group group-address binding mtunnel number command to re-configure a physical interface.

MD/6/DEL_PRIV_PIM

Message

MD/6/DEL_PRIV_PIM:In VPN instance "[vpn-instance-name]", PIM has been terminated successfully on the MTI. (FlCode=[STRING][ULONG])

Description

Succeeded in disabling PIM on the private network interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

PIM is disabled on the private network interface.

Procedure

  • This log message is informational only, and no action is required.

MD/3/DIFFPIM

Message

MD/3/DIFFPIM:In VPN instance "[vpn-instance-name]", invalid PIM protocol was running. (FlCode=[STRING][ULONG])

Description

PIM running on the interface was neither SM nor DM.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

During the processing of the Group-Switching message, PIM running on the interface was neither SM nor DM.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

MD/5/INV_MDT

Message

MD/5/INV_MDT:In VPN instance "[vpn-instance-name]", MD task was not private. (FlCode=[STRING][ULONG])

Description

The MD task was not a task of private network instance.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The MD task was incorrect.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

MD/4/LNK_SL

Message

MD/4/LNK_SL:In VPN instance "[vpn-instance-name]", failed to allocate memory for the source list's header of ([group-address], [source-address]). (FlCode=[STRING][ULONG])

Description

Failed to allocate memory for the header of the source list.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[group-address] Indicates the address of a group.
[source-address] Indicates the source addresses of a group.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The memory allocation failed.

Procedure

  1. Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MD/4/MALSRL_F

Message

MD/4/MALSRL_F:In VPN instance "[vpn-instance-name]", failed to allocate memory for the source node of ([group-address], [source-address]) [switch-group-address]. (FlCode=[STRING][ULONG])

Description

Failed to allocate the memory for the source node.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[group-address] Indicates the address of a group.
[source-address] Indicates the source addresses of a group.
[switch-group-address] Indicates the address of a switching group.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The memory allocation failed.

Procedure

  1. Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MD/4/MALSRN_F

Message

MD/4/MALSRN_F:In VPN instance "[vpn-instance-name]", failed to allocate memory for the source node of ([group-address], [source-address]) [switch-group-address]. (FlCode=[STRING][ULONG])

Description

Failed to allocate the memory for the source node.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[group-address] Indicates the address of a group.
[source-address] Indicates the source addresses of a group.
[switch-group-address] Indicates the address of a switching group.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The memory allocation failed.

Procedure

  1. Run the display diagnostic-information command, save the command output, and then contact technical support personnel.

MD/4/MTILOST

Message

MD/4/MTILOST:In VPN instance "[vpn-instance-name]", when processing a group switch message, the MTI was not assigned for this MD. (FlCode=[STRING][ULONG])

Description

The MTI does not belong to this multicast group.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

During the processing of the Group-Switching message, the MTI interface could not find the corresponding MD.

Procedure

  1. Run the multicast-domain share-group command to re-configure a shared group and bind the group to the MTI interface.
  2. Run the ip address command on the MTI interface to configure an IP address for the interface.
  3. Run the pim command on the MTI interface to enable PIM.
  4. End.

MD/4/NO_SWTGRP

Message

MD/4/NO_SWTGRP:In VPN instance "[vpn-instance-name]", the Data MDT [group-address] was not found. (FlCode=[STRING][ULONG])

Description

Failed to find the switching group.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[group-address] Indicates the address of a group.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Search for all senders of Group-Switching messages.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

MD/4/NON_GRPSWTPL

Message

MD/4/NON_GRPSWTPL:In VPN instance "[vpn-instance-name]", received the UP/DOWN event when the MTI or Data MDT did not exist. (FlCode=[STRING][ULONG])

Description

A Up/Down message is received when the switching group or MTI does not exist.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The received MD Group-Switching packet was processed.

Procedure

  1. Run the multicast-domain share-group group-address binding mtunnel number command to re-configure a physical interface.

MD/3/NOPIM

Message

MD/3/NOPIM:In VPN instance "[vpn-instance-name]", PIM was not running on the MTI. (FlCode=[STRING][ULONG])

Description

The MTI interface was disabled with PIM.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

During the processing of the Group-Switching message, PIM was not run on the MTI interface.

Procedure

  1. Run the pim command on the MTI interface to enable PIM.

MD/4/REG_ACL_F

Message

MD/4/REG_ACL_F:In VPN instance "[vpn-instance-name]", registering ACL update callback functions failed.(FlCode=[STRING][ULONG])

Description

The MD failed to register the ACL update callback function with the MRM.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] indicates the name of a VPN instance.
FlCode indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to call the MRM interface to add the ACL name to the MRM.

Procedure

  1. Reconfigure the commands for Named ACLs.

MD/6/REUSED_SWTGRP

Message

MD/6/REUSED_SWTGRP:In VPN instance "[vpn-instance-name]", a Data MDT [switch-group-pool] was reused, the counter was [counter]. (FlCode=[STRING][ULONG])

Description

Failed to allocate the address for the switching group because the address has been used.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[switch-group-pool] Indicates the address of switching group pool.
[counter] Indicates the number of the reused address of switching group pool.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The Group-Switching message of the MD was received.

Procedure

  • This log message is informational only, and no action is required.

MD/4/SNDSWT_F

Message

MD/4/SNDSWT_F:In VPN instance "[vpn-instance-name]", failed to send a switch notification message. (FlCode=[STRING][ULONG])

Description

Failed to send the switching notification message.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to send the switching notification message.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

MD/4/TSK_SC

Message

MD/4/TSK_SC:In VPN instance "[vpn-instance-name]", MD task was successfully created. (FlCode=[STRING][ULONG])

Description

Succeeded in creating a task of the multicast domain.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

A shared group was configured for the multicast instance.

Procedure

  • This log message is informational only, and no action is required.

MD/4/USED_SHA_SWT

Message

MD/4/USED_SHA_SWT:In VPN instance "[vpn-instance-name]", received a MD Share message to join Group [share-group], but other VPN instance had joined this group before. (FlCode=[STRING][ULONG])

Description

The shared group has been occupied by other instances.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[share-group] Indicates the address of a shared group.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The shared group has been occupied by other instances.

Procedure

  1. Run the multicast-domain share-group command to re-configure a shared group.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5635

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next