No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VCMP

VCMP

VCMP_ADP/3/ACLFAIL

Message

VCMP_ADP/3/ACLFAIL: Failed to deliver ACL for slot([STRING]). (Error Code=[ULONG])

Description

Delivering the ACL rule to the interface card fails.

Parameters

Parameter Name Parameter Meaning
STRING Slot ID of the interface card where delivery fails.
ULONG Error code for the delivery failure.

Possible Causes

An exception occurs upon lower-layer ACL delivery.

Procedure

  1. If the log is triggered by command delivery, delete the command and execute it again. Then check whether the command is executed successfully.
    • If so, go to step 3.
    • If not, go to step 2.
  2. Obtain log and configuration files and contact technical support personnel.
  3. End.

VCMP_ADP/3/ACLRUNOUT

Message

VCMP_ADP/3/ACLRUNOUT: Slot([STRING]) runs out of ACL. (Error Code=[ULONG])

Description

The ACL fails to be delivered because ACL resources on the interface card are full.

Parameters

Parameter Name Parameter Meaning
STRING Slot ID of the interface card where delivery fails.
ULONG Error code for the execution failure.

Possible Causes

The ACL fails to be delivered because ACL resources on the interface card are full.

Procedure

  1. Delete the unnecessary command that occupies ACL resources and reconfigure the VCMP command to trigger ACL delivery. Then check whether the command is reconfigured successfully.
    • If so, go to step 3.
    • If not, go to step 2.
  2. Obtain log and configuration files and contact technical support personnel.
  3. End.

VCMP_ADP/3/IPCSENDFAIL

Message

VCMP_ADP/3/IPCSENDFAIL:Failed to send IPC message to IO board([STRING]). (Error Code=[ULONG])

Description

Sending IPC messages to the interface card fails.

Parameters

Parameter Name Parameter Meaning
IO board Slot ID of the interface card where execution fails.
Error Code Error code for the execution failure.

Possible Causes

There is an error in inter-card communication or data received by the interface card is incorrect.

Procedure

  1. If the log is triggered by command delivery, delete the command and execute it again. Then check whether the command is executed successfully.
    • If so, go to step 3.
    • If not, go to step 2.
  2. Obtain log and configuration files and contact technical support personnel.
  3. End.

VCMP/5/VCMP_INCONSISTENT_VLAN

Message

VCMP/5/VCMP_INCONSISTENT_VLAN:The system made the VLAN information on the main control board and interface board consistent. (InconsistentVLANs=([STRING]))

Description

The system made the VLAN information on the main control board and interface board consistent.

Parameters

Parameter Name Parameter Meaning
InconsistentVLANs Indicates inconsistent VLAN information.

Possible Causes

A master/slave switchover was performed when the device functioning as a client deleted VLANs in batches.

Procedure

  1. This log message is informational only, and no action is required.

    NOTE:

    Services may be temporarily interrupted if this log is generated.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5597

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next