No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD

BFD

BFD/3/ADDFSM_ERR

Message

BFD/3/ADDFSM_ERR:Slot failed to add session status machine table! (SlotNumber=[STRING], Discriminator=[ULONG])

Description

Failed to add a state machine entry of a session.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the number of an interface board.

Discriminator

indicates the discriminator of a session.

Possible Causes

Adding a state machine entry of a session failed.

Procedure

  1. Check the session configuration and session information. Then, try setting up a session again.

BFD/3/ADDRCV_ERR

Message

BFD/3/ADDRCV_ERR:Slot failed to add session receival table! (SlotNumber=[STRING], Discriminator=[ULONG])

Description

Failed to add a session receiving entry.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the number of an interface board.

Discriminator

indicates the discriminator of a session.

Possible Causes

Adding a receiving session entry failed.

Procedure

  1. Check the session configuration and session information. Then, try setting up a session again.

BFD/6/CREATE_SESS_ERR

Message

BFD/6/CREATE_SESS_ERR:Failed to create BFD session. It will be created again later. (ConfigurationName=[STRING])

Description

Failed to create a BFD session and it would be re-created later.

Parameters

Parameter Name Parameter Meaning
ConfigurationName indicates the configuration name of the BFD session.

Possible Causes

An error occurs during the setup of the BFD session. The possible causes are as follows:

1. Failed to choose a master process board.

2. The number of BFD sessions reached the upper limit specified in the PAF.

Procedure

  1. Run the display bfd session command to check whether the BFD session is created.

    (1) If so, go to Step 5.

    (2) If not, go to Step 2.

  2. Run the display bfd statistics command to check whether the number of BFD sessions reaches the upper limit.

    (1) If so, delete redundant BFD sessions.

    (2) If not, go to Step 3.

  3. Run the display device command to check the type of the interface board and check whether the board supports BFD.

    (1) If yes, go to Step 4.

    (2) If not, replace an interface board that supports BFD.

  4. Collect log information and configuration information, and then contact technical support personnel.
  5. End.

BFD/6/CRTSESS

Message

BFD/6/CRTSESS:The BFD session has been created successfully. (Discriminator=[ULONG], ConfigurationName=[STRING], Applications=[STRING], PeerIp=[STRING], SessionType=[STRING], BindIFName=[STRING], BindVpnName=[STRING], SourceIp=[STRING])

Description

A BFD session was successfully created.

Parameters

Parameter Name Parameter Meaning

Discriminator

Local discriminator

ConfigurationName

Configuration name

Applications

Application bound to a BFD session

PeerIp

Destination IP address

SessionType

Type of a BFD session

BindIFName

Name of an interface bound to a BFD session

BindVpnName

Name of a VPN instance bound to a BFD session

SourceIp

Source IP address

Possible Causes

A BFD session was successfully created.

Procedure

  1. This log message is informational only, and no action is required.

BFD/3/DELFSM_ERR

Message

BFD/3/DELFSM_ERR:Slot failed to delete session status machine table! (SlotNumber=[STRING], Discriminator=[ULONG])

Description

Failed to delete a state machine entry of a session.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the number of an interface board.

Discriminator

indicates the discriminator of a session.

Possible Causes

Deletion of a session state machine entry failed.

Procedure

  1. Check the session configuration and session information. Then, try deleting the session again.

BFD/3/DELRCV_ERR

Message

BFD/3/DELRCV_ERR:Slot failed to delete session receival entry! (SlotNumber=[STRING], Discriminator=[ULONG])

Description

Failed to delete the receiving session entry.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the number of an interface board.

Discriminator

indicates the discriminator of a session.

Possible Causes

The action of deleting the receiving session entry failed.

Procedure

  1. Check the session configuration and session information. Then, try deleting the session again.

BFD/3/DELRCV_ERR_ADD

Message

BFD/3/DELRCV_ERR_ADD:Slot failed to delete session receival entry when adding session! (SlotNumber=[STRING], Discriminator=[ULONG])

Description

Failed to delete a receiving session entry when adding a session.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the number of an interface board.

Discriminator

indicates the discriminator of a session.

Possible Causes

The action of deleting the receiving session entry failed.

Procedure

  1. Check the session configuration and session information. Then, try setting up a session again.

BFD/5/DELSESS

Message

BFD/5/DELSESS:The BFD session was deleted. (Discriminator=[ULONG], Result=[STRING], Applications=[STRING], BindIFName=[STRING], SourceIp=[STRING], PeerIp=[STRING])

Description

A BFD session was deleted.

Parameters

Parameter Name Parameter Meaning

Discriminator

Local discriminator of a session

Result

Whether a BFD session is deleted:
  • Succeeded

  • Failed

Applications

Application bound to a BFD session

BindIFName

Name of an interface bound to a BFD session

SourceIp

Source IP address

PeerIp

Destination IP address

Possible Causes

A BFD session was deleted.

Procedure

  1. This log message is informational only, and no action is required.

BFD/3/DELSESS_SYS

Message

BFD/3/DELSESS_SYS:BFD session is deleted because of [delete-reason]. (Discriminator=[ULONG])

Description

A BFD session was deleted.

Parameters

Parameter Name Parameter Meaning

[delete-reason]

Cause for deletion

Discriminator

Local discriminator of the BFD session

Possible Causes

A BFD session is deleted.

Procedure

  1. This log information is informational only, and no action is required.

BFD/4/IO_REACH_SESSLMT

Message

BFD/4/IO_REACH_SESSLMT:The number of sessions on the slot had reached upper limit, new session bound on this interface board could not be created! (SlotNumber=[STRING])

Description

The number of sessions bound to an interface reached the upper limit. No more sessions bound to the interface can be created.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the number of an interface board.

Possible Causes

The number of sessions bound to an interface reached the upper limit. No more sessions bound to the interface can be created.

Procedure

  1. Run the display bfd statistics command to view BFD session information.
  2. Do not create more sessions bound to the interface on the interface board. Alternatively, delete some useless sessions bound to the interface on the interface board.

BFD/4/REACH_IF_LIM

Message

BFD/4/REACH_IF_LIM:The number of the interfaces bound with the session had reached the upper limit set in the PAF/License file!

Description

The number of interfaces to which BFD sessions are bound exceeded the upper limit set in the PAF or license file.

Parameters

Parameter Name Parameter Meaning

None

None

Possible Causes

The number of interfaces to which BFD sessions are bound exceeded the upper limit.

Procedure

  1. If user services are not adversely affected, no action is required.
  2. Run the display bfd statistics command to view BFD session information.
  3. If redundant BFD sessions are bound to interfaces, delete the sessions.

BFD/3/REALTIME_CFG_ERR

Message

BFD/3/REALTIME_CFG_ERR:Failed to backup the configuration entry in realtime! (BfdName=[STRING], ErrorCode=[ULONG])

Description

Failed to back up configuration entries in real time. (Error codes: The value 0 is returned when configuration entries are backed up successfully; error types are returned when configuration entries are backed up unsuccessfully.)

Parameters

Parameter Name Parameter Meaning

BfdName

indicates the configuration name of a BFD session.

ErrorCode

indicates an error code.

Possible Causes

Failed to back up configuration entries in real time.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

BFD/4/STACHG_DWNTOUP

Message

BFD/4/STACHG_DWNTOUP:BFD session changed from Down to Up. (SlotNumber=[STRING], Discriminator=[ULONG], Applications=[STRING], BindInterfaceName=[STRING], ProcessPST=[STRING])

Description

Configured a WTR timer and the status of a BFD session on a certain interface board changed from Down to Up.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the slot number of the interface board on which the status of a BFD session changed.

Discriminator

indicates the discriminator of a session of which the status changes.

Applications

indicates the application that is bound to the BFD session.

BindInterfaceName

indicates the name of the bound interface.

ProcessPST

indicates the flag bit of the PST that is modified.

Possible Causes

A session was set up through negotiation between both ends.

Procedure

  1. The log message is informative only, and no action is required.

BFD/4/STACHG_TODWN

Message

BFD/4/STACHG_TODWN:BFD session changed to Down. (SlotNumber=[STRING], Discriminator=[ULONG], Diagnostic=[STRING], Applications=[STRING], ProcessPST=[STRING], BindInterfaceName=[STRING], InterfacePhysicalState=[STRING], InterfaceProtocolState=[STRING])

Description

The status of a BFD session on an interface board changed to Down.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the slot number of an interface board.

Discriminator

indicates the discriminator of a session.

Diagnostic

Indicates the type of the Down state. The values are as follows:
  • AdminDown: The local end proactively enters the AdminDown state.
  • ReceiveAdminDown: The local end enters the Down state after receiving a BFD packet with the AdminDown state from the remote end.
  • DetectDown: The local end enters the Down state when the detection expires because it does not receive BFD packets from the remote end.
  • NeighborDown: The local end enters the Down state after receiving a BFD packet with the Down state from the remote end.

Applications

indicates the application that is bound to the BFD session.

ProcessPST

indicates the flag bit of the PST that is modified.

BindInterfaceName

indicates the name of the bound interface.

InterfacePhysicalState

indicates the physical status of the interface.

InterfaceProtocolState

indicates the protocol status of the interface.

Possible Causes

The BFD session was Down because a BFD session on an interface board did not receive corresponding BFD packets within a detection period.

Procedure

  1. Run the display bfd session all command to check whether the BFD session status is restored automatically.

    (1) If so, go to Step 6.

    (2) If not, go to Step 2.

  2. Run the display current-configuration configuration bfd command to check whether one end of the link is not enabled with BFD.

    (1) If BFD is disabled, enable BFD and then go to Step 1.

    (2) If BFD is enabled, go to Step 3.

  3. Run the display bfd session all command on both ends to check whether the BFD session is deleted.

    (1) If so, go to Step 5.

    (2) If not, go to Step 4.

  4. Run the ping ip-addr command to check whether the link detected by the BFD session fails to forward traffic.

    (1) If so, go to Step 5.

    (2) If not, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.

BFD/4/STACHG_TOUP

Message

BFD/4/STACHG_TOUP:BFD session changed to Up. (SlotNumber=[STRING], Discriminator=[ULONG], FormerStatus=[STRING], Applications=[STRING], BindInterfaceName=[STRING], ProcessPST=[STRING])

Description

The status of a BFD session on an interface board changed from other status (AdminDown, Down, or Init) to Up.

Parameters

Parameter Name Parameter Meaning

SlotNumber

indicates the slot number of the interface board on which the status of a BFD session changed.

Discriminator

indicates the discriminator of a session of which the status changes.

FormerStatus

indicates other status. The value can be AdminDown, Down, or Init.

Applications

indicates the application that is bound to the BFD session.

BindInterfaceName

indicates the name of the bound interface.

ProcessPST

indicates the flag bit of the PST that is modified.

Possible Causes

A session was set up through negotiation between both ends.

Procedure

  1. The log message is informative only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5613

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next