No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HA

HA

HA/6/RESTART

Message

HA/6/RESTART:When deciding whether to restart slave board, the user choose [Y/N].

Description

The user determined whether to reset the standby main board.

Parameters

Parameter Name Parameter Meaning
[Y/N] Users chose [Y/N] to determine whether to reset the standby main board.
  • Y: indicates that the user determines to reset the standby main board.

  • N: indicates that the user determines to cancel the operation.

Possible Causes

After running the slave restart command, the user needs to confirm.

Procedure

  1. This log message is informational only, and no action is required.

HA/5/RESTSLA

Message

HA/5/RESTSLA:Rebooted the slave board. (Slot=[STRING])

Description

The slave board was restarted.

Parameters

Parameter Name Parameter Meaning
Slot Indicates the lost where the slave board resides.

Possible Causes

The slave switchover command was run, and the slave board restarted after Y was typed.

Procedure

  1. This log message is informational only, and no action is required.

HA/5/RSTSLA

Message

HA/5/RSTSLA:Rebooted the slave board, because the messages in the queue were too much. (Slot=[STRING])

Description

The slave board was restarted.

Parameters

Parameter Name Parameter Meaning
Slot Indicates the lost where the slave board resides.

Possible Causes

Failed to resend for many times because the message queue was full.

Procedure

  1. The message queue is full and the HA restarts the slave board.

HA/6/SWITCH_CHASSIS

Message

HA/6/SWITCH_CHASSIS:When deciding whether to switch the active main board to the standby main board in [Slot], the user chose [Y/N].

Description

The user needs to confirm whether to perform active/standby switchover.

Parameters

Parameter Name Parameter Meaning

[Slot]

Indicates the lost where the slave board resides.

[Y/N]

Users chose [Y/N] to switch the active main board to the standby main board.

  • Y: indicates that the user determines to switch the active main board to the standby main board.

  • N: indicates that the user determines to cancel the operation.

Possible Causes

After running the slave switchover chassis command, the user needs to confirm.

Procedure

  1. This log message is informational only, and no action is required.

HA/6/SWITCHOVER

Message

HA/6/SWITCHOVER:When deciding whether to switch slave to master, the user choose [STRING].

Description

The user needs to confirm whether to perform active/standby switchover.

Parameters

Parameter Name Parameter Meaning
[STRING] Users chose [STRING] to determine whether to perform the active/standby switchover.

Y: indicates that the user determines to perform the active/standby switchover.

N: indicates that the user determines to cancel the operation.

Possible Causes

After running the slave switchover command, the user needs to confirm.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5502

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next