No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PGM

PGM

PGM/4/CONNECT_ESTAB

Message

PGM/4/CONNECT_ESTAB: The switch successfully connects to the Controller. The Controller is [STRING1] and the Controller IP address is [STRING2].

Description

The device and controller are connected successfully.

Parameters

Parameter Name Parameter Meaning
[STRING1] Indicates that the controller is the master or backup.
[STRING2] Indicates the controller IP address.

Possible Causes

The device and controller are connected successfully.

Procedure

  1. This log message is informational only, and no action is required.

PGM/4/CONNECT_INPT

Message

PGM/4/CONNECT_INPT: The switch is disconnected from the Controller. The Controller is [STRING1] and the Controller IP address is [STRING2].

Description

The device was disconnected from the controller and recorded controller information.

Parameters

Parameter Name Parameter Meaning
[STRING1] Indicates that the controller is the master or backup.
[STRING2] Indicates the controller IP address.

Possible Causes

The device was disconnected from the controller.

Procedure

  1. Check whether a user disconnected the device from the controller manually. If not, go to step 2.
  2. Check the network connection. If the network connection is normal, go to step 3.
  3. Run the display group-policy status command to check the status of the controller associated with the device. If the status is not connected, the device does not set up a connection with the controller. Check whether the controller IP address configured in the RADIUS server template is correct and whether the device IP address added to the controller is correct. If not, modify the configuration.
  4. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.

PGM/4/RECEIVE_MESSAGE

Message

PGM/4/RECEIVE_MESSAGE: Record group-policy information. (IP=[STRING1], Command="[STRING2]").

Description

The device receives the packets from the controller and delivers them to each module to process.

Parameters

Parameter Name Parameter Meaning
[STRING1] Indicates the controller IP address.
[STRING2] Packets received by the device.

Possible Causes

The device receives the packets from the controller.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 6244

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next