No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIPNG

RIPNG

RIPNG/6/FREEZE_ENTER

Message

RIPNG/6/FREEZE_ENTER:The number of routes on RIPng process [process-id] reached the upper threshold, and thus the RIPng process was suspended.

Description

The number of routes on the RIPng process reached the upper threshold, and thus the RIPng process was suspended and did not process the received packets.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the RIPng process ID.

Possible Causes

The number of routes on the RIPng process reached the upper threshold.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/6/FREEZE_RECOVER

Message

RIPNG/6/FREEZE_RECOVER:The number of routes reached the lower threshold, and thus RIPng process [process-id] recovered from the suspension state and resumed processing packets.

Description

The number of routes reached the lower threshold, and thus the RIPng process recovered from the suspension state and resumed processing packets.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the RIPng process ID.

Possible Causes

The number of routes reached the lower threshold.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/3/INVLD_IF_MTU_F

Message

RIPNG/3/INVLD_IF_MTU_F:RIPng could not run on interface [interface-name] with the MTU as [mtu-value].

Description

The RIPng can not run on the interface with improper MTU.

Parameters

Parameter Name Parameter Meaning
[interface-name] Indicates the interface name.
[mtu-value] Indicates the value of the maximum transmission unit.

Possible Causes

The MTU value on the interface was modified.

Procedure

  1. Reconfigure the MTU value.

RIPNG/3/IPV6_DISAB_F

Message

RIPNG/3/IPV6_DISAB_F:IPv6 was not enabled globally. (ProcessId=[ULONG])

Description

IPv6 was not enabled globally.

Parameters

Parameter Name Parameter Meaning
ProcessId Indicates the process ID.

Possible Causes

IPv6 was not enabled globally.

Procedure

  1. Enable IPv6 in the system view.

RIPNG/6/ISSU_COMP

Message

RIPNG/6/ISSU_COMP: RIPng finished PAF comparison. The upgrade type is [upgradetype].

Description

RIPNG completed the operation of comparing the upgrade type in the PAF/License file with that on the local router and confirmed the upgrade type.

Parameters

Parameter Name Parameter Meaning
[upgradetype] Indicates the upgrade type.
  • 1: lossless
  • 2: lossy

Possible Causes

RIPNG completed the operation of comparing the upgrade type in the PAF/License file with that on the local router and confirmed the upgrade type.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/3/MAX_LOGIF_REACH_F

Message

RIPNG/3/MAX_LOGIF_REACH_F:The number of RIPng configurable logical interfaces reached the maximum value. (ProcessId=[ULONG])

Description

The maximum number of networks supported by RIPng was reached.

Parameters

Parameter Name Parameter Meaning
ProcessId Indicates the process ID.

Possible Causes

The maximum number of networks supported by RIPng was reached.

Procedure

  1. Delete some networks in RIPng.

RIPNG/6/MEMSHORT_ENTER

Message

RIPNG/6/MEMSHORT_ENTER: RIPng received memory shortage notification.

Description

RIPng received the notification because system memory usage is high.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The system memory usage is high.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/6/MEMSHORT_RECOVER

Message

RIPNG/6/MEMSHORT_RECOVER: RIPng received memory shortage recovery notification.

Description

RIPng received the notification that system memory shortage was recovered.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The system recovered from memory shortage.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/6/RIPNG_NBR_ADD

Message

RIPNG/6/RIPNG_NBR_ADD:RIPng neighbor is added on the interface. (ProcessId=[ULONG], Interface=[STRING], Neighbor=[STRING])

Description

A RIPng neighbor is added on the interface.

Parameters

Parameter Name Parameter Meaning

ProcessId

ID of a RIPng process

Interface

Interface name

Neighbor

IPv6 address of a neighbor

Possible Causes

The RIPng process receives information about the new neighbor.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/6/RIPNG_NBR_DEL

Message

RIPNG/6/RIPNG_NBR_DEL:RIPng neighbor is deleted from the interface. (ProcessId=[ULONG], Interface=[STRING], Neighbor=[IPADDR], Reason=[STRING])

Description

A RIPng neighbor is deleted from the interface.

Parameters

Parameter Name Parameter Meaning

ProcessId

ID of a RIPng process

Interface

Interface name

Neighbor

IPv6 address of a neighbor

Reason

Reason for deleting a RIPng neighbor

Possible Causes

The RIPng neighbor may be deleted due to the following reasons:
  • The physical or logical interface went Down or was deleted.
  • Configurations were changed.
  • The timer expired.

Procedure

  1. This log message is informational only, and no action is required.

RIPNG/3/NO_GLO_SITE_ADDR_F

Message

RIPNG/3/NO_GLO_SITE_ADDR_F:Specific request is dropped, because global or site-local address is not assigned for interface [interface-name]. (ProcessId=[ULONG])

Description

The request of RIPng is dropped because there was no global or site-local address assigned for interface.

Parameters

Parameter Name Parameter Meaning
[interface-name] Indicates the interface name.
ProcessId Indicates the process ID.

Possible Causes

If an Update packet was sent to a non-RIPng interface, the global address or the local address was considered as the source address.

Procedure

  1. Configure a global address or a local address on the interface.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5509

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next