No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ETRUNK

ETRUNK

ETRUNK/4/ETRUNK_AUTHENTICATE_PEER_FAIL

Message

ETRUNK/4/ETRUNK_AUTHENTICATE_PEER_FAIL: Authenticating the peer E-Trunk failed. (ETrunkId=[ULONG], AuthenticationMode=[STRING])

Description

Peer E-Trunk authentication failed.

Parameters

Parameter Name Parameter Meaning
ETrunkId E-Trunk ID
AuthenticationMode E-Trunk authentication mode

Possible Causes

Authentication modes or keys were inconsistent on the two E-Trunk ends.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.

ETRUNK/4/MBR_PHYSTAT_CHG

Message

ETRUNK/4/MBR_PHYSTAT_CHG:The physical status of an E-Trunk member changed. (MemberType=[STRING], MemberId=[ULONG], State=[STRING])

Description

The physical status of an E-Trunk member changed.

Parameters

Parameter Name Parameter Meaning
MemberType Indicates the member type. Only one member type is supported: Eth-Trunk.
MemberId Indicates the member ID.
State Indicates the state
  • Up

  • Down

Possible Causes

The physical status of an E-Trunk member (only the Eth-Trunk type is supported) changed.

Procedure

  1. This log message is informational only, and no action is required.

ETRUNK/4/MEMBER_STATE_CHG

Message

ETRUNK/4/MEMBER_STATE_CHG:The status of an E-Trunk member changed. (MemberType=[STRING], MemberId=[ULONG], OldState=[STRING], OldReason=[STRING], NewState=[STRING], NewReason=[STRING])

Description

The status of an E-Trunk member changed.

Parameters

Parameter Name Parameter Meaning
MemberType Indicates the member type. Only one member type is supported: Eth-Trunk.
MemberId Indicates the member ID.
OldState Indicates the old state
  • Backup: Indicates the backup state.

  • Master: Indicates the master state.

  • Negot: Indicates the negotiation state.

OldReason Indicates the causes of the old state
  • FORCE_BACKUP: Indicates the forcible backup state.

  • FORCE_MASTER: Indicates the forcible master state.

  • ETRUNK_INIT: Indicates the E-Trunk initialization.

  • ETRUNK_BACKUP: Indicates that the E-Trunk is the backup.

  • ETRUNK_MASTER: Indicates that the E-Trunk is the master.

  • PEER_MEMBER_DOWN: Indicates that the peer member is Down.

  • PEER_MEMBER_UP: Indicates that the peer member is Up.

  • NO_PEER_MEMBER: Indicates that the peer member does not exist.

NewState Indicates the new state.
  • Backup: Indicates the backup state.

  • Master: Indicates the master state.

  • Negot: Indicates the negotiation state.

NewReason Indicates the causes of the new state
  • FORCE_BACKUP: Indicates the forcible backup state.

  • FORCE_MASTER: Indicates the forcible master state.

  • ETRUNK_INIT: Indicates the E-Trunk initialization.

  • ETRUNK_BACKUP: Indicates that the E-Trunk is the backup.

  • ETRUNK_MASTER: Indicates that the E-Trunk is the master.

  • PEER_MEMBER_DOWN: Indicates that the peer member is Down.

  • PEER_MEMBER_UP: Indicates that the peer member is Up.

  • NO_PEER_MEMBER: Indicates that the peer member does not exist.

Possible Causes

The status of an E-Trunk member changed or the cause of status changed. For example, the E-Trunk member was the master; when it was set to the forcible backup state through command lines, it became the backup.

Procedure

  1. This log message is informational only, and no action is required.

ETRUNK/4/STATE_CHG

Message

ETRUNK/4/STATE_CHG:The status of an E-Trunk changed. (ETrunkId=[ULONG], OldState=[STRING], OldReason=[STRING], NewState=[STRING], NewReason=[STRING])

Description

The status of an E-Trunk changed.

Parameters

Parameter Name Parameter Meaning
ETrunkId Indicates the E-Trunk ID.
OldState Indicates the old state
  • Init: Indicates the initialization state.

  • Backup: Indicates the backup state.

  • Master: Indicates the master state.

OldReason Indicates the causes of the old state
  • PRI: Indicates the priority calculation.

  • TIMEOUT: Indicates the timeout.

  • BFD_DOWN: Indicates that the BFD session is Down.

  • PEER_TIMEOUT: Indicates that the peer device times out.

  • PEER_BFD_DOWN: Indicates that the peer BFD session is Down.

  • INIT: Indicates the initialization.

NewState Indicates the new state
  • Init: Indicates the initialization state.

  • Backup: Indicates the backup state.

  • Master: Indicates the master state.

NewReason Indicates the causes of the new state
  • PRI: Indicates the priority calculation.

  • TIMEOUT: Indicates the timeout.

  • BFD_DOWN: Indicates that the BFD session is Down.

  • PEER_TIMEOUT: Indicates that the peer device times out.

  • PEER_BFD_DOWN: Indicates that the peer BFD session is Down.

  • INIT: Indicates the initialization.

Possible Causes

The status of an E-Trunk changed or the cause of status changed. For example, the E-Trunk was the backup; when the E-Trunk did not receive protocol packets from the peer device within the timeout period, it became the master.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5629

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next