No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MLD

MLD

MLD/6/ERR_VER_PKT1

Message

MLD/6/ERR_VER_PKT1:In VPN instance "[vpn-instance-name]", ignored the Query received with the version of MLDv[version] on the MLDv1 interface [interface-name] ([interface-address]). (FlCode=[STRING][ULONG])

Description

An MLDv2 Query message was received on the interface enabled with MLDv1.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[version] Indicates the version of a Query message.
[interface-name] Indicates the name of an interface.
[interface-address] Indicates the IP address of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

An MLDv2 Query message was received on the interface enabled with MLDv1.

Procedure

  • This log message is informational only, and no action is required.

MLD/6/ERR_VER_PKT2

Message

MLD/6/ERR_VER_PKT2:In VPN instance "[vpn-instance-name]", ignored the Query received with the version of MLDv[version] on the MLDv2 interface [interface-name] ([interface-address]). (FlCode=[STRING][ULONG])

Description

An MLDv1 Query message was received on the interface enabled with MLDv2.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[version] Indicates the version of a Query message.
[interface-name] Indicates the name of an interface.
[interface-address] Indicates the IP address of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

An MLDv1 Query message was received on the interface enabled with MLDv2.

Procedure

  • This log message is informational only, and no action is required.

MLD/6/GLB_ENTRY

Message

MLD/6/GLB_ENTRY:In VPN instance "[vpn-instance-name]", MLD discarded the received report ([source-address], [group-address]) because the number of MLD group memberships in all VPN instances reached the limit. The current statistical number of MLD group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The received MLD Report message was discarded because the number of MLD entries in all instances reached the limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the upper limit of the number of MLD entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the MLD limit for all instances was set, when the total number of MLD entries in all instances reached the limit, the received MLD Report message was discarded.

Procedure

  • This log message is informational only, and no action is required.

MLD/6/GLB_LIMIT

Message

MLD/6/GLB_LIMIT:In all VPN instances, the number of existed MLD group memberships exceeded the limit. (FlCode=[STRING][ULONG])

Description

The total number of MLD entries in all current instances exceeded the configured limit.

Parameters

Parameter Name Parameter Meaning
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that all instances were configured with the MLD limit, this log message was generated when the total number of MLD entries in all instances exceeded the limit.

Procedure

  • Run the limit command in the system view to adjust the maximum number of MLD entries that can be created.

MLD/6/IF_ENTRY

Message

MLD/6/IF_ENTRY:In VPN instance "[vpn-instance-name]", MLD discarded the received report ([source-address], [group-address]) because the number of MLD group memberships reached the limit on the interface [interface-name]. The current statistical number of MLD group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The MLD Report message received from the interface was discarded because the number of MLD entries on the interface reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[interface-name] Indicates the interface name.
[statistical-number] Indicates the upper limit of the number of MLD entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current interface was configured with the MLD limit, when the number of MLD entries on the interface reached the limit, the received MLD Report message was discarded.

Procedure

  • This log message is informational only, and no action is required.

MLD/6/IF_LIMIT

Message

MLD/6/IF_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed MLD group memberships exceeded the limit on this interface. (FlCode=[STRING][ULONG])

Description

The number of MLD entries on the current interface exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current interface was configured with the MLD limit, the number of MLD entries on the interface exceeded the limit.

Procedure

  • Run the limit command in the system view to adjust the maximum number of MLD entries that can be created.

MLD/6/INST_ENTRY

Message

MLD/6/INST_ENTRY:In VPN instance "[vpn-instance-name]", MLD discarded the received report ([source-address], [group-address]) because the number of MLD group memberships in this VPN instance reached the limit. The current statistical number of MLD group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The received MLD Report message was discarded because the number of MLD entries in the instance reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the upper limit of the number of MLD entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current instance was configured with the MLD limit, when the number of MLD entries in the instance reached the limit, the received MLD Report message was discarded.

Procedure

  • This log message is informational only, and no action is required.

MLD/6/INST_LIMIT

Message

MLD/6/INST_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed MLD group memberships exceeded the limit. (FlCode=[STRING][ULONG])

Description

The number of MLD entries in the current instance exceeded the configured limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current instance was configured with the MLD limit, the number of MLD entries in the current instance exceeded the limit.

Procedure

  • Run the limit command in the system view to adjust the maximum number of MLD entries that can be created.

MLD/4/REG_ACL_F

Message

MLD/4/REG_ACL_F:In VPN instance "[vpn-instance-name]", registering ACL update callback functions failed. (FlCode=[STRING][ULONG])

Description

MLD failed to register the ACL update callback function with the MRM.

Parameters

Parameter Name Parameter Meaning

[vpn-instance-name]

Indicates the name of the VPN instance.

FlCode

indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to call the MRM interface to add the ACL name to the MRM.

Procedure

  1. Reconfigure the commands for Named ACLs.

MLD/4/SET_MLD_INTPLC_FAIL

Message

MLD/4/SET_MLD_INTPLC_FAIL:In VPN instance "[vpn-instance-name]", failed to set the MLD application policy for interface [interface-name]. (FlCode=[STRING][ULONG])

Description

Failed to set the MLD application policy on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the name of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to deliver the interface application policy when MLD was configured on the interface.

Procedure

  1. Run the undo mld enable command and reconfigure MLD on the interface.
  2. If this log message is generated after each reconfiguration, contact technical support personnel.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5628

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next