No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SSH

SSH

SSH/4/CHANGEPWD_FAIL

Message

SSH/4/CHANGEPWD_FAIL:Failed to change the password. (IP=[STRING], VpnInstanceName=[STRING], UserName=[STRING], Times=[ULONG], FailedReason=[STRING])

Description

A user that logged in to the device using STelnet failed to change the password.

Parameters

Parameter Name Parameter Meaning
IP User IP address
VpnInstanceName VPN instance name
UserName User name
Times Number of password change attempts
FailedReason Reason for the password change failure

Possible Causes

Changing the password failed.

Procedure

  • Use the correct old password and specify a valid new password to complete the change without exceeding the maximum number of change attempts (3).
  • If the maximum number of password change attempts has been reached, log out and log in to the device again using STelnet. Then complete the password change without exceeding the maximum number of change attempts (3).

SSH/4/CMD_USERCHOICE

Message

SSH/4/CMD_USERCHOICE:When deciding whether to run the command [command], the user chose [Y/N].

Description

When deciding whether to run the command, the user needs to confirm.

Parameters

Parameter Name Parameter Meaning
[command] indicates the command.
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.

SSH/5/CMDRECORD

Message

SSH/5/CMDRECORD:Record command information. (Task=[STRING], IP=[STRING], User=[STRING], Command="[STRING]")

Description

Logged the command run on the SFTP client.

Parameters

Parameter Name Parameter Meaning
Task indicates the name of a task.
IP indicates an IP address.
User indicates the name of a user.
Command indicates a command.

Possible Causes

The command run on the SFTP client was logged.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/CONTINUE_KEYEXCHANGE

Message

SSH/4/CONTINUE_KEYEXCHANGE:The server had not been authenticated in the process of exchanging keys. When deciding whether to continue, the user chose [Y/N].

Description

The server had not been authenticated in the process of exchanging keys. When deciding whether to continue, the user needs to confirm.

Parameters

Parameter Name Parameter Meaning
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/OVERWRITE_FILE

Message

SSH/4/OVERWRITE_FILE:When deciding whether to overwrite the file [file-name], the user chose [Y/N].

Description

When deciding whether to overwrite the file , the user need to confirm.

Parameters

Parameter Name Parameter Meaning
[file-name] indicates the name of a file.
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/RENAME_FILE

Message

SSH/4/RENAME_FILE:When deciding whether to rename file [old-file-name] as [new-file-name], the user chose [Y/N].

Description

When deciding whether to rename the file , the user need to confirm.

Parameters

Parameter Name Parameter Meaning
[old-file-name] indicates the old name of a file.
[new-file-name] indicates the new name of a file.
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/SAVE_PUBLICKEY

Message

SSH/4/SAVE_PUBLICKEY:When deciding whether to save the server's public key [public-key-name], the user chose [Y/N].

Description

When deciding whether to save the server's public key , the user need to confirm.

Parameters

Parameter Name Parameter Meaning
[public-key-name] indicates the name of a public key.
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/SAVEAS_PUBLICKEY

Message

SSH/4/SAVEAS_PUBLICKEY:When deciding whether to save the server's public key [public-key-name] as another name, the user chose [Y/N].

Description

When deciding whether to save the server's public key as another name, the user need to confirm.

Parameters

Parameter Name Parameter Meaning
[public-key-name] indicates the name of a public key.
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/SAVEAS_PUBLICKEY_NEWKEY

Message

SSH/4/SAVEAS_PUBLICKEY_NEWKEY:The user saves the public key of the server [server] as a new name [name]. (UserName=[UserName], IpAddress=[IpAddress], VPN=[VPN])

Description

The public key of the SSH server is saved with a new name.

Parameters

Parameter Name Parameter Meaning
server SSH server name
name Name of the new public key
UserName User name
IpAddress User IP address
VPN VPN instance name

Possible Causes

The public key of the SSH server was saved with a new name.

Procedure

  1. This log is informational only, and no action is required.

SSH/5/SCP_FILE_DOWNLOAD

Message

SSH/5/SCP_FILE_DOWNLOAD:The SCP server sent the file [STRING] to a client. (UserName=[STRING], IpAddress=[STRING], VpnInstanceName=[STRING])

Description

The SCP server sent the file to the SCP client.

Parameters

Parameter Name Parameter Meaning
file-name File name
UserName User name
IpAddress User IP address
VpnInstanceName VPN instance name

Possible Causes

When the SCP client downloaded the file from the SCP server, the SCP server logged the information.

Procedure

  • This log message is informational only, and no action is required.

SSH/5/SCP_FILE_DOWNLOAD_FAIL

Message

SSH/5/SCP_FILE_DOWNLOAD_FAIL:The SCP server failed to send the file [STRING] to a client. (UserName=[string], IpAddress=[string], VpnInstanceName=[string], TransferLength=[ULONG])

Description

The SCP server failed to send a file to the SCP client.

Parameters

Parameter Name Parameter Meaning

FileName

Indicates the file name.

UserName

Indicates the user name.

IpAddress

Indicates the user IP address.

VpnInstanceName

Indicates the name of a VPN instance.

Transferlength

Indicates the length of the data that has been transmitted.

Possible Causes

The file failed to be downloaded from the SCP server.

Procedure

  • This log message is informational only, and no action is required.

SSH/4/SERVER_FILE_OVERWRITE

Message

SSH/4/SERVER_FILE_OVERWRITE:The file [FileName] was overwritten by [ServiceType] client. (UserName=[UserName], IpAddress=[IpAddress], VpnInstanceName=[VpnInstanceName])

Description

When the client attempted to upload a file to the server where a file with the same name already existed, the file with the same name was overwritten.

Parameters

Parameter Name Parameter Meaning

FileName

Indicates the file name.

ServiceType

Indicates the supported protocol type. The available options are as follows:
  • SCP
  • SFTP

UserName

Indicates the user name.

IpAddress

Indicates the user IP address.

VpnInstanceName

Indicates the name of a VPN instance.

Possible Causes

When the client attempted to upload a file to the server where a file with the same name already existed, the file with the same name was overwritten.

Procedure

  • This log message is informational only, and no action is required.

SSH/5/SCP_FILE_UPLOAD

Message

SSH/5/SCP_FILE_UPLOAD:The SCP server received the file [STRING] from a client. (UserName=[string], IpAddress=[string], VpnInstanceName=[string])

Description

The SCP server received the file from the SCP client.

Parameters

Parameter Name Parameter Meaning
file-name File name
UserName User name
IpAddress User IP address
VpnInstanceName VPN instance name

Possible Causes

When the SCP client uploaded the file to the SCP server, the SCP server logged the information.

Procedure

  • This log message is informational only, and no action is required.

SSH/5/SCP_FILE_UPLOAD_FAIL

Message

SSH/5/SCP_FILE_UPLOAD_FAIL:The SCP server failed to receive the file [STRING] from a client. (UserName=[string], IpAddress=[string], VpnInstanceName=[string], TransferLength=[ULONG])

Description

The SCP server failed to receive a file from the SCP client.

Parameters

Parameter Name Parameter Meaning

FileName

Indicates the file name.

UserName

Indicates the user name.

IpAddress

Indicates the user IP address.

VpnInstanceName

Indicates the name of a VPN instance.

Transferlength

Indicates the length of the data that has been transmitted.

Possible Causes

The file failed to be uploaded to the SCP server.

Procedure

  • This log message is informational only, and no action is required.

SSH/4/SFTP_REQ_RECORD

Message

SSH/4/SFTP_REQ_RECORD:The SFTP server received an operation request from a client. (UserName=[string], IpAddress=[string], VpnInstanceName=[string], Request=[string], Result=[string])

Description

The SFTP server received an operation request from a client.

Parameters

Parameter Name Parameter Meaning
UserName User name of the SFTP client
IpAddress IP address of the SFTP client
VpnInstanceName VPN instance name. This parameter is specified if the SFTP user logs in to the SFTP server using private network routes. This parameter is empty if the SFTP user logs in to the SFTP server using public network routes.
Request Type of the operation request sent by the SFTP client
Result Indicates the processing result of the request message:
  • Success
  • ExecutionFailure

Possible Causes

The user logged in to the SFTP server and performed an operation on the server.

Procedure

  1. The trap is informational only, and no action is required.

SSH/5/SSH_CONNECT_CLOSED

Message

SSH/5/SSH_CONNECT_CLOSED:SSH connect was closed. (IP=[STRING], VPNInstanceName=[STRING], UserName=[STRING])

Description

The SSH connection was closed.

Parameters

Parameter Name Parameter Meaning
IP User IP address
VPNInstanceName VPN instance name
UserName User name

Possible Causes

The TCP connection between the SSH server and client was torn down.

Procedure

  1. This log message is informational only, and no action is required.

SSH/4/SSH_FAIL

Message

SSH/4/SSH_FAIL: Failed to login through SSH. (IP=[STRING], VpnInstanceName=[STRING], UserName=[STRING], Times=[ULONG], FailedReason=[STRING])

Description

An SSH user failed to log in.

Parameters

Parameter Name Parameter Meaning
IP IP address of the SSH user
VpnInstanceName Name of a VPN instance.
UserName User name of the SSH user
Times Number of login failures
FailedReason Cause for the login failure

Possible Causes

An SSH user failed to log in. Information, including the IP address, user name, and numbers of the login failures, was logged.

Procedure

  1. Based on FailedReason, determine how to rectify the fault.
    1. If FailedReason indicates that the login failed due to an authentication failure, use the correct user name and password to log in.
    2. If FailedReason indicates that the login failed due to a low SSH user level, perform the following operations:

      1. Run the display ssh user-information command to view the authentication mode of the SSH user.

        1. If the authentication mode is ECC, RSA or DSA, run the user-interface vty command to enter the VTY channel to which the user attempts to log in.

          1. Run the display this command to check whether the SSH user is an administrator.

          2. If the SSH user is not an administrator, run the user privilege level command to set the SSH user to an administrator.

        2. If the authentication mode is not ECC, RSA or DSA, run the aaa command to enter the AAA view. If the SSH user is authenticated by a remote server, set the SSH user to an administrator on the remote server.

        3. Run the display this command to check whether the SSH user is authenticated by a remote or local server.

        4. If the SSH user is authenticated by a local server and the SSH user is not an administrator, run the user privilege level command to set the SSH user to an administrator.

        5. If the SSH user is authenticated by a remote server, set the SSH user to an administrator on the remote server.

  2. Collect log information and configuration information, and then contact technical support personnel.

SSH/4/STELNET_SERVER

Message

SSH/4/STELNET_SERVER:The STELNET server is not started. Use the command 'stelnet server enable' to start it.

Description

The STelnet service was disabled on the server when the SSH client requested the STelnet service.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The STelnet service was disabled on the server when the SSH client requested the STelnet service.

Procedure

  1. Enable the STelnet service on the server.

SSH/5/SSH_TRANS_FILE_FINISH

Message

SSH/5/SSH_TRANS_FILE_FINISH:Finished to transfer file. (FileName=[STRING], UserName=[string], IpAddress=[string], VpnInstanceName=[string], TransferLength=[ULONG], ActionType=[STRING])

Description

A file was transferred.

Parameters

Parameter Name Parameter Meaning

FileName

Indicates the file name.

UserName

Indicates the user name.

IpAddress

Indicates the IP address of the user.

VpnInstanceName

Indicates the VPN instance name.

Transfer length

Indicates the length of data transferred.

ActionType

Indicates the operation type.
  • Upload a file.
  • Download a file.

Possible Causes

The file was transferred using SFTP.

Procedure

  • This log message is informational only, and no action is required.

SSH/4/UPDATE_PUBLICKEY

Message

SSH/4/UPDATE_PUBLICKEY:When deciding whether to update the key [public-key-name] which already existed, the user chose [Y/N].

Description

When deciding whether to update the key which already existed, the user need to confirm.

Parameters

Parameter Name Parameter Meaning
[public-key-name] indicates the name of a public key.
[Y/N] prompts a user to confirm the action.

Possible Causes

A confirmation is required for the user to run a command.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5498

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next