No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSDP

MSDP

MSDP/4/CHECK_SOCKET_FAIL

Message

MSDP/4/CHECK_SOCKET_FAIL:In VPN instance "[vpn-instance-name]", failed to handle msdp socket. The socket ID was [socket-id], the peer was [peer-address], the operation code was [operation-code], the error code was [error-code].(FlCode=[STRING][ULONG])

Description

The backup MSDP socket information is incorrect or the configurations on the standby main board are incorrect.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name]

Name of a VPN instance

[socket-id]

Socket ID

[peer-address]

Peer address

[operation-code]
Operation code
  • 1: The standby main board checks the socket.

  • 2: The standby main board obtains the local port number and address information.

  • 3: The standby main board obtains the remote port number and address information.

  • 4: The MD5 option is set.

  • 5: The KeyChain option is set.

  • 6: The standby main board checks the boundary of the received packet.

  • 7: Attributes for socket backing up are set.

  • 8: The application-ready option is set.

  • 9: Asynchronization attributes are set.

[error-code]

Error code

FlCode

Name of the source code file and the line number of this log message

Possible Causes

The set socket option was incorrect.

Procedure

  • This log message is informational only, and no action is required.

MSDP/6/PEER_NTFDWN

Message

MSDP/6/PEER_NTFDWN:In VPN instance "[vpn-instance-name]", a session with the peer [peer-address] was closed because a Notification TLV was received from this peer. (FlCode=[STRING][ULONG])

Description

The session with the peer was closed because a Notification message was received from the peer.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[peer-address] Indicates the IP address of the peer.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The session was closed.

Procedure

  • This log message is informational only, and no action is required.

MSDP/6/PEER_TIMEOUT

Message

MSDP/6/PEER_TIMEOUT:In VPN instance "[vpn-instance-name]", a session with peer [peer-address] was closed because the peer holding time expired. (FlCode=[STRING][ULONG])

Description

The session with the peer was closed because the connection with the peer timed out.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[peer-address] Indicates the IP address of the peer.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The Connection timer timed out.

Procedure

  1. Check that the physical lines are normally connected.
  2. Check whether the peer configurations change.
  3. Re-establish the connection if the route changes and the peer becomes unreachable.
  4. End.

MSDP/6/PEER_UP

Message

MSDP/6/PEER_UP:In VPN instance "[vpn-instance-name]", a session with the peer [peer-address] was initiated. (FlCode=[STRING][ULONG])

Description

A session with the peer was started.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[peer-address] Indicates the IP address of the peer.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

A session with the peer was started.

Procedure

  • This log message is informational only, and no action is required.

MSDP/4/SA_LIMIT

Message

MSDP/4/SA_LIMIT:In VPN instance "[vpn-instance-name]", (S,G) entry whose RP was [rp-address] was ([source-address], [group-address]), it exceeded the peer ([peer-address])'s SA-cache maximum [maximum-number]. (FlCode=[STRING][ULONG])

Description

The number of the (S, G) entries reached the upper limit of the peer SA cache.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[rp-address] Indicates the IP address of the RP.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[peer-address] Indicates the IP address of the peer.
[maximum-number] Indicates the maximum number.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The number of the (S, G) entries reached the upper limit of the peer SA cache.

Procedure

  1. Run the peer peer-address sa-policy { import | export } [ acl advanced-acl-number ] command to configure the policy guiding the receiving and forwarding of SA messages.
  2. Run the peer peer-address sa-cache-maximum sa-limit command to adjust the maximum number of (S, G) entries that can be learned by the device cache from the specified MSDP peer.
  3. End.

MSDP/4/SET_MSDP_GLBPLC_FAIL

Message

MSDP/4/SET_MSDP_GLBPLC_FAIL:In VPN instance "[vpn-instance-name]", failed to set the MSDP global application policy. (FlCode=[STRING][ULONG])

Description

Failed to set an MSDP global application policy.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to set an MSDP global application policy for the lower layer when configuring MSDP.

Procedure

  1. Run the undo msdp command to reconfigure MSDP.
  2. If this log is generated each time the configuration is performed, contact technical support personnel.

MSDP/4/SET_MSDP_GWLIST_FAIL

Message

MSDP/4/SET_MSDP_GWLIST_FAIL:In VPN instance "[vpn-instance-name]", failed to set the MSDP global white list application policy. (FlCode=[STRING][ULONG])

Description

Failed to set an MSDP global whitelist application policy.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to set an MSDP global whitelist application policy for the lower layer when configuring MSDP.

Procedure

  1. Run the undo msdp command to reconfigure MSDP.
  2. If this log is generated each time the configuration is performed, contact technical support personnel.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 5586

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next