No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Log Reference

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LINE

LINE

LINE/4/AUTHORITY_CHANGE

Message

LINE/4/AUTHORITY_CHANGE:The authentication mode was changed to password authentication and the user level was changed to 15 on [STRING] at the first user login. (IpAddress=[STRING])

Description

During the first login, the authentication mode was changed to password authentication and the user level was changed to Level 15 on the user interface.

Parameters

Parameter Name Parameter Meaning
user-interface Type and number of the user interface
IpAddress User IP address

Possible Causes

During the first login, the user was required to configure user interface attributes. When the attributes such as user rights were modified, the modification information was logged.

Procedure

  1. This log message is informational only, and no action is required.

LINE/3/AUTO_EXEC

Message

LINE/3/AUTO_EXEC:The user chose [STRING] when deciding whether to automatically execute the command.

Description

The user needed to determine whether to automatically run the command before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Prompts the user to confirm the action.
  • Y: Yes.
  • N: No.

Possible Causes

The user needed to determine whether to automatically run the command before running the command.

Procedure

  1. This log message is informational only, and no action is required.

LINE/3/CLR_ONELINE

Message

LINE/3/CLR_ONELINE:The user chose [STRING] when deciding whether to disconnect the specified user interface.

Description

The user needed to determine whether to disconnect from the specified user interface before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Prompts the user to confirm the action.
  • Y: Yes.
  • N: No.

Possible Causes

The user needed to determine whether to disconnect from the specified user interface before running the command.

Procedure

  1. This log message is informational only, and no action is required.

LINE/4/CONNECT_FAIL

Message

LINE/4/CONNECT_FAIL: Failed to connect. (Ip=[Ip-address], VpnName=[VpnName], Reason=[Reason])

Description

The user failed to log in the device.

Parameters

Parameter Name Parameter Meaning

Ip

Indicates the user IP address.

VpnName

Indicates a VPN instance name.

Reason

Indicates the reason of the failure

Possible Causes

The user failed to log in the device in Console, Telnet, or SSH mode.

Procedure

  1. This log message is informational only, and no action is required.

LINE/5/LOCK

Message

LINE/5/LOCK: Succeed in locking the user-interface [user-interface]. (IpAddress=[IpAddress], VpnName=[VpnName], User=[User])

Description

The user interface was successfully locked.

Parameters

Parameter Name Parameter Meaning

user-interface

Type and number of a user interface

IPAddress

User IP address

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName

Indicates a VPN instance name.

User

User name

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

Possible Causes

The lock command was run to lock the user interface.

Procedure

  1. This log message is informational only, and no action is required.

LINE/4/LOGIN_FAIL

Message

LINE/4/LOGIN_FAIL: Failed to login. (Ip=[Ip], VpnName=[VpnName], Reason=[Reason])

Description

The user failed to log in.

Parameters

Parameter Name Parameter Meaning

Ip

Indicates an IP address of the user.

VpnName

Indicates a VPN instance name.

Reason

Indicates the reason for unsuccessful login.

  • The number of users who log in to the server through the channel reaches the upper limit.
  • The channel configuration is incorrect.

Possible Causes

The number of users who log in to the server through the channel reaches the upper limit, or the channel configuration is incorrect.

Procedure

  1. This log message is informational only, and no action is required.

LINE/3/NO_EXEC

Message

LINE/3/NO_EXEC:The user chose [STRING] when deciding whether to cancel the current configuration.

Description

The user needed to determine whether to cancel the current configuration before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Prompts the user to confirm the action.
  • Y: Yes.
  • N: No.

Possible Causes

The user needed to determine whether to cancel the current configuration before running the command.

Procedure

  1. This log message is informational only, and no action is required.

LINE/3/SND_ALL

Message

LINE/3/SND_ALL:The user chose [STRING] when deciding whether to send messages to all the users.

Description

The user needed to determine whether to send messages to all the users before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Prompts the user to confirm the action.
  • Y: Yes.
  • N: No.

Possible Causes

The user needed to determine whether to send messages to all the users before running the command.

Procedure

  1. This log message is informational only, and no action is required.

LINE/3/SND_ONE

Message

LINE/3/SND_ONE:The user chose [STRING] when deciding whether to send messages to the specified user.

Description

The user needed to determine whether to send messages to the specified user before running the command.

Parameters

Parameter Name Parameter Meaning
[STRING] Prompts the user to confirm the action.
  • Y: Yes.
  • N: No.

Possible Causes

The user needed to determine whether to send messages to the specified user before running the command.

Procedure

  1. This log message is informational only, and no action is required.

LINE/5/UNLOCK

Message

LINE/5/UNLOCK: The user unlocked the user-interface [user-interface] successfully. (UserName=[UserName], IPAddress=[IPAddress], VpnName=[VpnName], TriedTimes=[TriedTimes])

Description

The user unlocked the user interface.

Parameters

Parameter Name Parameter Meaning

user-interface

User interface type and number

UserName

User name

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

IPAddress

User IP address

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName

Indicates a VPN instance name.

TriedTimes

Number of times the password is entered

Possible Causes

After the user ran the lock command to lock the user interface and set a locking password, the user attempted to enter the locking password to unlock the user interface. The log was recorded after the user unlocked the user interface.

Procedure

  1. This log message is informational only, and no action is required.

LINE/4/UNLOCK_ERROR_FAIL

Message

LINE/4/UNLOCK_ERROR_FAIL: Failed to unlock the user-interface [user-interface]. (UserName=[UserName], IPAddress=[IPAddress], VpnName=[VpnName], Reason=[Reason])

Description

The user interface failed to be unlocked due to certain reasons.

Parameters

Parameter Name Parameter Meaning

user-interface

Type and number of a user interface

UserName

User name

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

IPAddress

User IP address

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName

Indicates a VPN instance name.

Reason

Reason of failure to unlock the user interface

Possible Causes

After the user ran the lock command to lock the user interface and set a locking password, the user attempted to enter the locking password. When the user entered an incorrect password or a timeout occurred in entering the password, the log was generated.

Procedure

  1. This log message is informational only, and no action is required.

LINE/4/UNLOCK_FAIL

Message

LINE/4/UNLOCK_FAIL: The user failed to unlock the user-interface [user-interface]. (UserName=[UserName], IPAddress=[IPAddress], VpnName=[VpnName], FailedTimes=[FailedTimes])

Description

The user failed to unlock the user interface.

Parameters

Parameter Name Parameter Meaning

user-interface

Indicates the user interface type and number.

UserName

Indicates the user name.

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

IPAddress

Indicates the user IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface or AUX interface, asterisks (**) are used to indicate the IP address.

VpnName

Indicates a VPN instance name.

FailedTimes

Indicates the number of times the password is incorrectly entered.

Possible Causes

After the user ran the lock command to lock the user interface and set a locking password, the user attempted to enter the locking password to unlock the user interface. When the number of times the password is incorrectly entered reaches three, the log was generated.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065665

Views: 6279

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next