No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-PIM-STD-MIB

HUAWEI-PIM-STD-MIB

Function Overview

HUAWEI-PIM-STD-MIB is used to manage the PIM protocol.

Root directory:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwMcast(149).hwPimStdMib(4)

Relationships Between Tables

Figure 96-1 shows the relationship between hwPimInterfaceTable, hwPimNeighborTable, and hwPimNbrSecAddressTable.

Figure 96-1  Relationship between hwPimInterfaceTable, hwPimNeighborTable, and hwPimNbrSecAddressTable

Because one PIM interface may have multiple PIM neighbors, indexes of hwPimInterfaceTable and hwPimNeighborTable should be the same. Then, you can obtain all the neighbors of a PIM interface through hwPimInterfaceIfIndex.

One neighbor may have multiple secondary IP addresses because the indexes of hwPimNeighborTable and hwPimNbrSecAddressTable are the same, that is, hwPimNeighborIfIndex, hwPimNeighborAddressType, and hwPimNeighborAddress. Therefore, through the three indexes, you can obtain all the secondary IP addresses of a neighbor.

Description of Single Objects

hwPimkeepalivePeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.14

hwPimKeepalivePeriod

Unsigned32

Read-write

This object indicates the lifetime of an (S, G) entry.

The value ranges from 60 to 65535.

The default value is 210.

Currently, the value range of 60 to 65535 is supported.

hwPimRegisterSuppressionTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.15

hwPimRegisterSuppressionTime

Unsigned32

Read-write

This object indicates the interval from the time when the DR receives a Register-Stop message to the time when the DR stops sending the multicast-data-encapsulated Register message.

The value ranges from 11 to 3600.

The default value is 60.

Currently, the value range of 11 to 3600 is supported.

hwPimStarGEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.16

hwPimStarGEntries

Gauge32

Read-only

This object indicates the total number of (*, G) entries.

This object is implemented as defined in the corresponding MIB files.

hwPimStarGIEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.17

hwPimStarGIEntries

Gauge32

Read-only

This object indicates the number of entries in hwPimStarGITable.

This object is implemented as defined in the corresponding MIB files.

hwPimSGEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.18

hwPimSGEntries

Gauge32

Read-only

This object indicates the total number of (S, G) entries, including PIM-SM entries and PIM-SSM entries.

This object is implemented as defined in the corresponding MIB files.

hwPimSGIEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.19

hwPimSGIEntries

Gauge32

Read-only

This object indicates the total number of entries in hwPimSGITable.

This object is implemented as defined in the corresponding MIB files.

hwPimSGRptEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.20

hwPimSGRptEntries

Gauge32

Read-only

This object indicates the total number of (S, G, RPT) entries. The value should be consistent with the total number of PIM-SM (S, G) entries.

This object is implemented as defined in the corresponding MIB files.

hwPimSGRptIEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.21

hwPimSGRptIEntries

Gauge32

Read-only

This object indicates the total number of entries in hwPimSGRptITable.

hwPimSGRptILocalMembership is not included.

hwPimOutAsserts

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.22

hwPimOutAsserts

Counter64

Read-only

This object indicates the total number of sent Assert messages.

This object is implemented as defined in the corresponding MIB files.

hwPimInAsserts

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.23

hwPimInAsserts

Counter64

Read-only

This object indicates the total number of received Assert messages.

This object is implemented as defined in the corresponding MIB files.

hwPimLastAssertInterface

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.24

hwPimLastAssertInterface

InterfaceIndexOrZero

Read-only

This object indicates the index of the interface that receives or sends the last Assert message.

This object is implemented as defined in the corresponding MIB files.

hwPimLastAssertGroupAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.25

hwPimLastAssertGroupAddressType

InetAddressType

Read-only

This object indicates the type of the multicast group address carried in the last sent or received Assert message.

This object is implemented as defined in the corresponding MIB files.

hwPimLastAssertGroupAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.26

hwPimLastAssertGroupAddress

InetAddres

Read-only

This object indicates the multicast group address carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB files.

hwPimLastAssertSourceAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.27

hwPimLastAssertSourceAddressType

InetAddressType

Read-only

This object indicates the address type of the source carried in the last received or sent Assert message.

This object is implemented as defined in the corresponding MIB files.

hwPimLastAssertSourceAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.28

hwPimLastAssertSourceAddress

InetAddress

Read-only

This object indicates the source address carried in the Assert message last received or sent.

This object is implemented as defined in the corresponding MIB files.

hwPimNeighborLossNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.29

hwPimNeighborLossNotificationPeriod

Unsigned32

Read-write

This object indicates the interval between when a neighbor is lost and when a Notification message is sent for reporting the neighbor-loss event.

The value ranges from 0 to 65535.

By default, the value is 0. That is, the neighbor-loss event is immediately reported.

This object is implemented as defined in the corresponding MIB files.

hwPimNeighborLossCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.30

hwPimNeighborLossCount

Counter32

Read-only

This object indicates the number of neighbor-loss events. Only the interface with the lowest IP address across the network needs to collect statistics on neighbor-loss events.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegisterNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.31

hwPimInvalidRegisterNotificationPeriod

Unsigned32

Read-write

This object indicates the period between when an invalid Register message is received and when a Notification message is sent for reporting the event of receiving an invalid Register message.

The value ranges from 10 to 65535.

By default, the value is 65535. That is, the event of receiving an invalid Register message is not reported.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegisterMsgsRcvd

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.32

hwPimInvalidRegisterMsgsRcvd

Counter32

Read-only

This object indicates the total number of received invalid Register messages.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegisterAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.33

hwPimInvalidRegisterAddressType

InetAddressType

Read-only

This object indicates the multicast group address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegisterOrigin

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.34

hwPimInvalidRegisterOrigin

InetAddress

Read-only

This object indicates the source address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegisterGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.35

hwPimInvalidRegisterGroup

InetAddress

Read-only

This object indicates the multicast group address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegisterRp

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.36

hwPimInvalidRegisterRp

InetAddress

Read-only

This object indicates the RP address carried in the invalid Register message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidJoinPruneNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.37

hwPimInvalidJoinPruneNotificationPeriod

Unsigned32

Read-write

This object indicates the period between when an invalid Join or Prune message is received and when a Notification message is sent for reporting the event of receiving an invalid Join or Prune message.

The value ranges from 10 to 65535.

By default, the value is 65535. That is, the event of receiving an invalid Join or Prune message is not reported.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidJoinPruneMsgsRcvd

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.38

hwPimInvalidJoinPruneMsgsRcvd

Counter32

Read-only

This object indicates the total number of received invalid Join or Prune messages.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidJoinPruneAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.39

hwPimInvalidJoinPruneAddressType

InetAddressType

Read-only

This object indicates the address type carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidJoinPruneOrigin

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.40

hwPimInvalidJoinPruneOrigin

InetAddress

Read-only

This object indicates the source address carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidJoinPruneGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.41

hwPimInvalidJoinPruneGroup

InetAddress

Read-only

This object indicates the multicast group address carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidJoinPruneRp

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.42

hwPimInvalidJoinPruneRp

InetAddress

Read-only

This object indicates the RP address carried in the invalid Join or Prune message last received.

This object is implemented as defined in the corresponding MIB files.

hwPimRpMappingNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.43

hwPimRpMappingNotificationPeriod

Unsigned32

Read-write

This object indicates the period between when the RP changes and when a Notification message is sent for reporting the RP-change event.

The value ranges from 0 to 65535.

The default value is 65535, indicating that no notification is to be sent.

This object is implemented as defined in the corresponding MIB files.

hwPimRpMappingChangeCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.44

hwPimRpMappingChangeCount

Counter32

Read-only

This object indicates the number of RP-change events.

This object is implemented as defined in the corresponding MIB files.

hwPimInterfaceElectionNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.45

hwPimInterfaceElectionNotificationPeriod

Unsigned32

Read-write

This object indicates the period between when a DR is selected and when a Notification message is sent for reporting the DR election event.

The value ranges from 0 to 65535.

The default value is 65535.

This object is implemented as defined in the corresponding MIB files.

hwPimInterfaceElectionWinCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.46

hwPimInterfaceElectionWinCount

Counter32

Read-only

This object indicates the number of times this device has been elected as a DR. This counter is not incremented for elections on an interface until the first periodic Hello message has been sent.

This object is implemented as defined in the corresponding MIB files.

hwPimRefreshInterval

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.47

hwPimRefreshInterval

Unsigned32

Read-write

This object indicates the interval for sending State-Refresh messages.

The value ranges from 1 to 255.

The default value is 60.

Currently, the value range of 1 to 255 is supported.

hwPimDeviceConfigStorageType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.48

hwPimDeviceConfigStorageType

StorageType

Read-write

This object indicates the storage type of objects.

This scalar is not implemented. When you perform a Get operation on this scalar, the default value nonVolatile is returned.

Currently, the Set operation is not supported.

hwPimNeighborAddCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.49

hwPimNeighborAddCount

Counter32

Read-only

This object indicates the number of times the PIM neighbor goes in the Up state.

This object is implemented as defined in the corresponding MIB files.

hwPimNeighborAddNotificationPeriod

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.50

hwPimNeighborAddNotificationPeriod

Unsigned32

Read-write

This object indicates the minimum interval for outputting an alarm on the increase in the number of exported PIM neighbors.

The value is in seconds.

The value ranges from 0 to 65535.

The default value is 65535, indicating that no notification is to be sent.

This object is implemented as defined in the corresponding MIB files.

hwPimMrtLimitAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.54

hwPimMrtLimitAddressType

InetAddressType

Accessible-for-notify

This object indicates the type of the multicast group address of the PIM entries whose upper limit is defined through the license file.

This object is implemented as defined in the corresponding MIB files.

hwPimMrtLimitSource

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.55

hwPimMrtLimitSource

InetAddress (SIZE (0|4|8|16|20))

Accessible-for-notify

This object indicates the source address of the entry.

This object is implemented as defined in the corresponding MIB files.

hwPimMrtLimitGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.56

hwPimMrtLimitGroup

InetAddress (SIZE (0|4|8|16|20))

Accessible-for-notify

This object indicates the group address of the entry.

This object is implemented as defined in the corresponding MIB files.

hwPimInstanceID

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.57

hwPimInstanceID

Unsigned32

Accessible-for-notify

This object indicates the Instance ID.

This object is implemented as defined in the corresponding MIB files.

hwPimInstanceName

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.60

hwPimInstanceName

DisplayString

Accessible-for-notify

This object indicates the name of the instance to which the trap message belongs.

This object is implemented as defined in the corresponding MIB file.

hwPimNeighborNotificationReason

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.61

hwPimNeighborNotificationReason

INTEGER

{

holdTimeExpired(1),

notReceiveHelloForALongTime(2),

interfaceIsDown(3),

receiveHelloAgain(4),

neighbourIsDeleted(5),

alarmTimeOut(6),

receiveHelloHoldTimeZero(7),

bfdSessionDown(8),

userOperation(9),

alarmClear(100)

}

Accessible-for-notify

This object indicates possible causes of PIM neighbor loss.

Currently, the following data types are supported:
  • holdTimeExpired(1)

  • receiveHelloHoldTimeZero(7)

  • bfdSessionDown(8)

  • userOperation(9)

hwPimNotificationAddressType

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.62

hwPimNotificationAddressType

InetAddressType

accessible-for-notify

This object indicates that the multicast group address is of the inetAddressType. The values are:
  • 1: IPv4 address
  • 2: IPv6 address

This object is implemented as defined in the corresponding MIB file.

hwPimStarGCurrentCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.63

hwPimStarGCurrentCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the number of global PIM (*, G) entries created.

This object is implemented as defined in the corresponding MIB file.

hwPimStarGTotalCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.64

hwPimStarGTotalCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the maximum number of global PIM (*, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

hwPimStarGThreshold

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.65

hwPimStarGThreshold

Unsigned32 (1..100)

accessible-for-notify

This object indicates the upper and lower alarm thresholds for global PIM (*, G) entries.

This object is implemented as defined in the corresponding MIB file.

hwPimSGCurrentCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.66

hwPimSGCurrentCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the number of global PIM (S, G) entries created.

This object is implemented as defined in the corresponding MIB file.

hwPimSGTotalCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.67

hwPimSGTotalCount

Unsigned32 (0..262144)

accessible-for-notify

This object indicates the maximum number of global PIM (S, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

hwPimSGThreshold

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.68

hwPimSGThreshold

Unsigned32 (1..100)

accessible-for-notify

This object indicates the upper and lower alarm thresholds for global PIM (S, G) entries.

This object is implemented as defined in the corresponding MIB file.

hwPimNotificationSrcAddr

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.69

hwPimNotificationSrcAddr

InetAddress (SIZE (0|4|8|16|20))

accessible-for-notify

This object indicates the source address in a multicast entry.

This object is implemented as defined in the corresponding MIB file.

hwPimNotificationGrpAddr

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.70

hwPimNotificationGrpAddr

InetAddress (SIZE (0|4|8|16|20))

accessible-for-notify

This object indicates the group address in a multicast entry.

This object is implemented as defined in the corresponding MIB file.

Description of MIB Tables

hwPimInterfaceTable

This table lists parameters about a PIM interface.

The indexes of this table are hwPimInterfaceIfIndex and hwPimInterfaceIpVersion.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.1

hwPimInterfaceIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.2

hwPimInterfaceIpVersion

InetVersion

Not-accessible

This object indicates the address version of a PIM interface.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.3

hwPimInterfaceAddressType

InetAddressType

Read-only

This object indicates the address type of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.4

hwPimInterfaceAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the IP address of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.5

hwPimInterfaceGenerationIdValue

Unsigned32

Read-only

This object indicates the GenerationID of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.6

hwPimInterfaceDr

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of a DR interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.7

hwPimInterfaceDrPriority

Unsigned32

Read-create

This object indicates the DR priority of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.8

hwPimInterfaceDrPriorityEnabled

TruthValue

Read-only

This object indicates whether this network segment uses the DR Priority option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.9

hwPimInterfaceHelloInterval

Unsigned32

Read-create

This object indicates the interval for an interface to send PIM Hello packets.

The value ranges from 0 to 18000.

The default value is 30.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.10

hwPimInterfaceTrigHelloInterval

Unsigned32

Read-create

This object indicates the maximum time before this switch sends a triggered PIM Hello message on this interface.

The value range defined in the MIB protocol is 0 to 60.

The default value is 5.

Currently, the value range of 1 to 5 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.11

hwPimInterfaceHelloHoldtime

Unsigned32

Read-create

This object indicates the holdtime of a PIM neighbor.

The value range defined in the MIB protocol is 0 to 65535 whereas the command line supports 1 to 65535.

The default value is 105.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.12

hwPimInterfaceJoinPruneInterval

Unsigned32

Read-create

This object indicates the interval for a PIM interface to send Join or Prune messages.

The value ranges from 0 to 18000.

The default value is 60.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.13

hwPimInterfaceJoinPruneHoldtime

Unsigned32

Read-create

This object indicates the holdtime field carried in the sent Join or Prune message.

The value range defined in the MIB protocol is 0 to 65535 whereas the command line supports 1 to 65535.

The default value is 210.

Currently, the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.14

hwPimInterfaceDfElectionRobustness

Unsigned32

Read-create

This object indicates the robustness variable for DF election.

The default value is 3.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.15

hwPimInterfaceLanDelayEnabled

TruthValue

Read-only

This object indicates whether this network segment uses the LanDelay option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.16

hwPimInterfacePropagationDelay

Unsigned32

Read-create

This object indicates the expected propagation delay between PIM switchs.

The value ranges from 0 to 32767, in milliseconds.

The default value is 500.

Currently, the value range of 1 to 32767 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.17

hwPimInterfaceOverrideInterval

Unsigned32

Read-create

This object indicates the interval for overriding a prune.

The value ranges from 0 to 65535.

The default value is 2500.

Currently, the maximum access is read-write, and the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.18

hwPimInterfaceEffectPropagDelay

Unsigned32

Read-only

This object indicates the negotiated value of the LanDelay on an interface.

The value ranges from 0 to 32767.

Currently, the value range of 1 to 32767 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.19

hwPimInterfaceEffectOverrideIvl

Unsigned32

Read-only

This object indicates the negotiated override interval on this network segment.

The value ranges from 0 to 65535.

Currently, the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.20

hwPimInterfaceSuppressionEnabled

TruthValue

Read-only

This object indicates whether Join suppression is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.21

hwPimInterfaceBidirCapable

TruthValue

Read-only

This object indicates whether bidirectional PIM is enabled.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.22

hwPimInterfaceDomainBorder

TruthValue

Read-create

This object indicates whether this interface is a PIM domain border.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.23

hwPimInterfaceStubInterface

TruthValue

Read-create

This object indicates whether PIM Silent is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.24

hwPimInterfacePruneLimitInterval

Unsigned32

Read-create

This object indicates the value of PruneLimitTimer on an interface. It is applicable only to PIM-DM.

The value ranges from 0 to 65535.

The default value is 60.

Currently, the maximum access is read-only; the return value 210 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.25

hwPimInterfaceGraftRetryInterval

Unsigned32

Read-create

This object indicates the interval for retransmitting Graft messages.

The value ranges from 0 to 65535

The default value is 3.

Currently, the maximum access is read-write.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.26

hwPimInterfaceSrPriorityEnabled

TruthValue

Read-only

This object indicates whether state refresh is enabled on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.27

hwPimInterfaceStatus

RowStatus

Read-create

This object indicates the row status.

  • Active
  • Create and Go
  • Destroy

Currently, CreateAndGo and Destroy are supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.28

hwPimInterfaceStorageType

StorageType

Read-create

This object indicates the storage type of objects.

Currently, only the value nonVolatile is returned.

Currently, Permanent is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.29

hwPimInterfaceName

DisplayString (SIZE (1..64))

Accessible-for-notify

This object indicates the name of the interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table supports only CreateAndGo. You must set hwPimInterfaceIfIndex and hwPimInterfaceIpVersion together to succeed in creating a row.

Modification Restriction

The value rang of hwPimInterfaceTrigHelloInterval defined in the MIB is 0 to 60 but the command line supports only 1 to 5. Therefore, if you input a value larger than 5 in the command line, the setting fails and an error code is returned.

The minimum values that can be set for the object, hwPimInterfaceHelloInterval, hwPimInterfaceTrigHelloInterval, hwPimInterfacePropagationDelay, hwPimInterfaceHelloHoldtime, hwPimInterfaceJoinPruneInterval, hwPimInterfaceJoinPruneHoldtime, hwPimInterfacePropagationDelay, hwPimInterfaceOverrideInterval, hwPimInterfaceEffectPropagDelay, hwPimInterfaceEffectOverrideIvl, and hwPimInterfaceGraftRetryInterval, are all 0 but the command line supports the minimum values to be 1. Therefore, if you input a value smaller than 1 in the command line, the setting fails and an error code is returned.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read only when multicast is enabled and the interface enabled with PIM exists.

The value ranges of hwPimInterfaceHelloInterval and hwPimInterfaceJoinPruneInterval defined in the MIB are both 0 to 18000 but the command line supports only 1 to 2147483647. Therefore, if the value read from the command line is greater than the maximum value defined in the MIB, the value 18000 is read.

hwPimNeighborTable

This table stores information about neighbors of all PIM interfaces.

The indexes of this table are hwPimNeighborIfIndex, hwPimNeighborAddressType, and hwPimNeighborAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.1

hwPimNeighborIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.2

hwPimNeighborAddressType

InetAddressType

Not-accessible

This object indicates the address type of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.3

hwPimNeighborAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates the address of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.4

hwPimNeighborGenerationIdPresent

TruthValue

Read-only

This object indicates whether a neighbor uses the GenerationID option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.5

hwPimNeighborGenerationIdValue

Unsigned32

Read-only

This object indicates the GenerationID of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.6

hwPimNeighborUpTime

TimeTicks

Read-only

This object indicates the time when the neighbor relationship is set up.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.7

hwPimNeighborExpiryTime

TimeTicks

Read-only

This object indicates the time remaining before the neighbor relationship expires.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.8

hwPimNeighborDrPriorityPresent

TruthValue

Read-only

This object indicates whether a neighbor uses the DR Priority option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.9

hwPimNeighborDrPriority

Unsigned32

Read-only

This object indicates the DR priority of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.10

hwPimNeighborLanPruneDelayPresent

TruthValue

Read-only

This object indicates whether a neighbor uses the LanPruneDelay option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.11

hwPimNeighborTBit

TruthValue

Read-only

This object indicates whether the T bit is set in the LanPruneDelay option received from a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.12

hwPimNeighborPropagationDelay

Unsigned32

Read-only

This object indicates the Propagation_Delay field of the LanPruneDelay option received from a neighbor.

The value ranges from 0 to 32767.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.13

hwPimNeighborOverrideInterval

Unsigned32

Read-only

This object indicates the Override_Interval field of the LanPruneDelay option received from a neighbor.

The value ranges from 0 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.14

hwPimNeighborBidirCapable

TruthValue

read-only

This object indicates whether bidirectional PIM is enabled.

Currently, only the value False is returned.

Currently, only the value False is returned.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.15

hwPimNeighborSrCapable

TruthValue

Read-only

This object indicates whether a neighbor supports state refresh.

State Refresh function is valid only to PIM DM.

Currently, the return value false is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.2.1.16

hwPimNeighborIfName

DisplayString (SIZE (1..64))

Accessible-for-notify

This object indicates the name of the neighbor interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimNbrSecAddressTable

This table stores secondary IP addresses of PIM neighbors. Only IPv6 neighbors have this table.

The indexes of this table are hwPimNbrSecAddressIfIndex, hwPimNbrSecAddressType, hwPimNbrSecAddressPrimary, and hwPimNbrSecAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.1

hwPimNbrSecAddressIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.2

hwPimNbrSecAddressType

InetAddressType

Not-accessible

This object indicates the type of the secondary IP address of a neighbor.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.3

hwPimNbrSecAddressPrimary

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates the primary IP address of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.3.1.4

hwPimNbrSecAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the secondary IP address of a neighbor.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimStarGTable

This table stores IPv4 and IPv6 (*, G) entries on a switch.

The indexes of this table are hwPimStarGAddressType and hwPimStarGGrpAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.1

hwPimStarGAddressType

InetAddressType

Not-accessible

This object indicates the address type of a multicast group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.2

hwPimStarGGrpAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a multicast group address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.3

hwPimStarGUpTime

TimeTicks

Read-only

This object indicates the time when an entry is created.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.4

hwPimStarGPimMode

HWPimMode

Read-only

The value of this object identifies the PIM mode.
  • 3: ASM
  • 4: Bidir, that is bidirectional PIM

Currently, only ASM(3) is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.5

hwPimStarGRpAddressType

InetAddressType

Read-only

This object indicates the address type of an RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.6

hwPimStarGRpAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.7

hwPimStarGPimModeOrigin

HWPimGroupMappingOriginType

Read-only

This object indicates the multicast address mapping method through which a switch learns the RP.
  • ConfigRp (static RP)
  • BSR
  • AutoRp
  • Embedded

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.8

hwPimStarGRpIsLocal

TruthValue

Read-only

This object indicates whether the local switch is an RP for the group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.9

hwPimStarGUpstreamJoinState

INTEGER{

notJoined

(1),joined

(2)}

Read-only

The value of this object identifies the status of the upstream of a (*, G) entry.
  • 1: NotJoined
  • 2: Joined

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.10

hwPimStarGUpstreamJoinTimer

TimeTicks

Read-only

This object indicates the interval for sending Join messages for (*, G).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.11

hwPimStarGUpstreamNeighborType

InetAddressType

Read-only

This object indicates the address type of an upstream neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.12

hwPimStarGUpstreamNeighbor

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the primary address of an upstream neighbor to which the local switch sends periodic (*, G) Join messages. In the PIM-SM specification, this address is also called RPF'(*, G).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.13

hwPimStarGRpfIfIndex

InterfaceIndexOrZero

Read-only

This object indicates the index of an RPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.14

hwPimStarGRpfNextHopType

InetAddressType

Read-only

This object indicates the type of the RPF next hop towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.15

hwPimStarGRpfNextHop

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of the RPF next hop towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.16

hwPimStarGRpfRouteProtocol

IANAipRouteProtocol

Read-only

This object indicates the unicast routing protocol through which the route used to find the RPF interface towards the RP is learnt.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.17

hwPimStarGRpfRouteAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the destination address of the unicast route used to find the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.18

hwPimStarGRpfRoutePrefixLength

InetAddressPrefixLength

Read-only

This object indicates the prefix length of the destination address of the unicast route used to find the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.19

hwPimStarGRpfRouteMetricPref

Unsigned32

Read-only

This object indicates the priority of the unicast route used to find the RPF interface towards the RP.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.4.1.20

hwPimStarGRpfRouteMetric

Unsigned32

Read-only

This object indicates the metric of the unicast route used to find the RPF interface towards the RP.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimStarGITable

This table stores information about interfaces related to (*, G) entries on a switch. An interface has this table only when one of the three situations is met:

  • local_receiver_include (*, G, I) is True.

  • The Join/Prune status is not NoInfo.

  • The assert status is not NoInfo.

The indexes of this table are hwPimStarGAddressType, hwPimStarGGrpAddress, and hwPimStarGIIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.1

hwPimStarGIIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.2

hwPimStarGIUpTime

TimeTicks

Read-only

This object indicates the time since this entry is created by the local switch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.3

hwPimStarGILocalMembership

TruthValue

Read-only

This object indicates whether the local switch has (*,G) local membership on this interface. It corresponds to local_receiver_include (*, G, I) in the PIM-SM specification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.4

hwPimStarGIJoinPruneState

INTEGER

Read-only

The value of this object identifies the Join/Prune status on the downstream interface.
  • 1: noInfo
  • 2: join
  • 3: prunePending

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.5

hwPimStarGIPrunePendingTimer

TimeTicks

Read-only

This object indicates the prune pending timer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.6

hwPimStarGIJoinExpiryTimer

TimeTicks

Read-only

This object indicates the time period during which an interface keeps the Join state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.7

hwPimStarGIAssertState

INTEGER

Read-only

The value of this object identifies the assert status of an interface.
  • 1: noInfo
  • 2: iAmAssertWinner
  • 3: iAmAssertLoser

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.8

hwPimStarGIAssertTimer

TimeTicks

Read-only

This object indicates the time remaining before the local switch next sends a (*, G) Assert message on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.9

hwPimStarGIAssertWinnerAddressType

InetAddressType

Read-only

This object indicates the address type of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.10

hwPimStarGIAssertWinnerAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.11

hwPimStarGIAssertWinnerMetricPref

Unsigned32

Read-only

This object indicates the priority of an assert winner.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.5.1.12

hwPimStarGIAssertWinnerMetric

Unsigned32

Read-only

This object indicates the metric of an assert winner.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimSGTable

This table stores (S, G) entries of IPv4/IPv6 PIM-SM and PIM SSM on a switch.

The indexes of this table are hwPimSGAddressType, hwPimSGGrpAddress, and hwPimSGSrcAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.1

hwPimSGAddressType

InetAddressType

Not-accessible

This object indicates the types of the source address and the multicast group address.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.2

hwPimSGGrpAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a multicast group address.

The length can be 4, 8, 16, or 20 bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.3

hwPimSGSrcAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a source address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.4

hwPimSGUpTime

TimeTicks

Read-only

This object indicates the time when an (S, G) entry is generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.5

hwPimSGPimMode

HWPimMode

Read-only

This object indicates the PIM mode.
  • 2: SSM
  • 3: ASM

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.6

hwPimSGUpstreamJoinState

INTEGER

Read-only

The value of this object identifies the status of the upstream interface of an (S, G) entry.
  • 1: notJoined
  • 2: joined

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.7

hwPimSGUpstreamJoinTimer

TimeTicks

Read-only

This object indicates the interval for sending Join messages for (S, G).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.8

hwPimSGUpstreamNeighbor

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an upstream neighbor. This address is also called RPF'(S, G) in the PIM-SM specification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.9

hwPimSGRpfIfIndex

InterfaceIndexOrZero

Read-only

This object indicates the index of an RPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.10

hwPimSGRpfNextHopType

InetAddressType

Read-only

This object indicates the address type of the RPF next hop towards the source.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.11

hwPimSGRpfNextHop

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of the RPF next hop towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.12

hwPimSGRpfRouteProtocol

IANAipRouteProtocol

Read-only

This object indicates the unicast routing protocol through which the route used to find the RPF interface towards the source is learnt.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.13

hwPimSGRpfRouteAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the destination address of the route used to find the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.14

hwPimSGRpfRoutePrefixLength

InetAddressPrefixLength

Read-only

This object indicates the prefix length of the destination address of the route used to find the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.15

hwPimSGRpfRouteMetricPref

Unsigned32

Read-only

This object indicates the priority of the route used to find the RPF interface towards the source.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.16

hwPimSGRpfRouteMetric

Unsigned32

Read-only

This object indicates the metric of the route used to find the RPF interface towards the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.17

hwPimSGSptBit

TruthValue

Read-only

This object indicates whether the (S, G) entry contains an SPT flag.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.18

hwPimSGKeepaliveTimer

TimeTicks

read-only

This object indicates the timeout period of the (S, G) entry.

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.19

hwPimSGDrRegisterState

INTEGER

Read-only

The value of this object identifies the status of the Register state machine of the source DR.
  • 1: noInfo
  • 2: join
  • 3: joinPending
  • 4: prune

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.20

hwPimSGDrRegisterStopTimer

TimeTicks

Read-only

This object indicates the time to stop registration.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.21

hwPimSGRpRegisterPmbrAddressType

InetAddressType

read-only

This object indicates the address type of an interface that sends Register messages.

The value of this object is:
  • IPv4(1)
  • IPv6(2)

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.22

hwPimSGRpRegisterPmbrAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

read-only

This object indicates the address of an interface that sends Register messages.

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.23

hwPimSGUpstreamPruneState

INTEGER

Read-only

The value of this object identifies the status of the upstream interface of a (S, G) entry.
  • 1: forwarding
  • 2: packpending
  • 3: pruned

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.24

hwPimSGUpstreamPruneLimitTimer

TimeTicks

Read-only

The value of this object identifies the PruneLimitTimer of the upstream interface of a (S, G) entry.

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.25

hwPimSGOriginatorState

INTEGER

Read-only

The value of this object identifies the status of the originator of a (S, G) entry.
  • 1: notOriginator
  • 2: originator

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.26

hwPimSGSourceActiveTimer

TimeTicks

Read-only

This object indicates the time remaining before the local switch reverts to the notOriginator state.

Currently, PIM-DM is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.6.1.27

hwPimSGStateRefreshTimer

TimeTicks

Read-only

This object indicates the value of the State-Refresh timer of a (S, G) entry.

Currently, PIM-DM is not supported.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The objects, hwPimSGKeepaliveTimer, hwPimSGRpRegisterPmbrAddressType, and hwPimSGRpRegisterPmbrAddress, are not implemented currently. Therefore, when you query the values of these objects, the value 0 is returned.

Since the PIM-DM mode is not defined in the MIB protocol, when you query the values of hwPimSGUpstreamPruneState, hwPimSGUpstreamPruneLimitTimer, hwPimSGOriginatorState, and hwPimSGStateRefreshTimer, the value 0 is returned.

hwPimSGITable

This table stores information about interfaces related to (S, G) entries on a switch. An interface has this table only when one of the three situations is met:

  • local_receiver_include (S, G, I) is True.

  • The Join/Prune status is not NoInfo.

  • The assert status is not NoInfo.

The indexes of this table are hwPimSGAddressType, hwPimSGGrpAddress, hwPimSGSrcAddress, and hwPimSGIIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.1

hwPimSGIIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.2

hwPimSGIUpTime

TimeTicks

Read-only

This object indicates the time since this entry is created by the local switch.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.3

hwPimSGILocalMembership

TruthValue

Read-only

local_receiver_include, This object indicates whether the current interface is in the downstream interface list of the (S, G) entry. It corresponds to local_receiver_include (S, G, I) in the PIM-SM specification.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.4

hwPimSGIJoinPruneState

INTEGER

Read-only

The value of this object identifies the Join/Prune status on the downstream interface.
  • 1: noInfo
  • 2: join
  • 3: prunePending

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.5

hwPimSGIPrunePendingTimer

TimeTicks

Read-only

This object indicates the PrunePrending timer on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.6

hwPimSGIJoinExpiryTimer

TimeTicks

Read-only

This object indicates the time remaining for an interface to be added to the downstream interface list of an (S, G) entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.7

hwPimSGIAssertState

INTEGER

Read-only

The value of this object identifies the assert status of an interface.
  • 1: noInfo
  • 2: iAmAssertWinner
  • 3: iAmAssertLoser

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.8

hwPimSGIAssertTimer

TimeTicks

Read-only

This object indicates the time remaining before the local switch next sends an (S, G) Assert message on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.9

hwPimSGIAssertWinnerAddressType

InetAddressType

Read-only

This object indicates the address type of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.10

hwPimSGIAssertWinnerAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of an assert winner.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.11

hwPimSGIAssertWinnerMetricPref

Unsigned32

Read-only

This object indicates the priority of an assert winner.

The value ranges from 0 to 2147483647.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.7.1.12

hwPimSGIAssertWinnerMetric

Unsigned32

Read-only

This object indicates the metric of an assert winner.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimSGRptTable

This table stores information about (S, G) entries and RPT status on a switch. Only PIM-SM entries have this table.

The indexes of this table are hwPimStarGAddressType, hwPimStarGGrpAddress, and hwPimSGRptSrcAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.1

hwPimSGRptSrcAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a source address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.2

hwPimSGRptUpTime

TimeTicks

Read-only

This object indicates the time when an (S, G) entry is generated.

The real value is 0.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.3

hwPimSGRptUpstreamPruneState

INTEGER

Read-only

The value of this object identifies the status of the upstream RPT of an (S, G) entry.
  • 1: rptNotJoined
  • 2: pruned
  • 3: notPruned

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.8.1.4

hwPimSGRptUpstreamOverrideTimer

TimeTicks

Read-only

This object indicates the time remaining before the local switch sends a triggered (S, G, RPT) Join message upstream.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimSGRptITable

This table stores information about interfaces of (S, G) entries. Only the interfaces working in PIM-SM mode and with the status being not NoInfo have this table.

The indexes of this table are hwPimStarGAddressType, hwPimStarGGrpAddress, hwPimSGRptSrcAddress, and hwPimSGRptIIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.1

hwPimSGRptIIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.2

hwPimSGRptIUpTime

TimeTicks

Read-only

This object indicates the time when an interface is added to the downstream interface list of an (S, G) entry.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.3

hwPimSGRptILocalMembership

TruthValue

Read-only

This object indicates whether the local device has both (*, G) include local membership and (S, G) exclude local membership on this interface.

Currently, the return value false is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.4

hwPimSGRptIJoinPruneState

INTEGER

Read-only

The value of this object identifies the state resulting from (S, G, RPT) Join or Prune messages received from a downstream interface.
  • 1: noInfo
  • 2: prune
  • 3: prunePending

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.5

hwPimSGRptIPrunePendingTimer

TimeTicks

Read-only

This object indicates the time remaining before the local switch starts to send Prune messages to the RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.9.1.6

hwPimSGRptIPruneExpiryTimer

TimeTicks

Read-only

This object indicates the time remaining before (S, G, RPT) Prune state of this interface expires.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The returned value of hwPimSGRptILocalMembership is always False.

hwPimGroupMappingTable

This table stores information about multicast group mapping on a switch.

The indexes of this table are hwPimGroupMappingOrigin, hwPimGroupMappingAddressType, hwPimGroupMappingGrpAddress, hwPimGroupMappingGrpPrefixLength, hwPimGroupMappingRpAddressType, and hwPimGroupMappingRpAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.1

hwPimGroupMappingOrigin

HWPimGroupMappingOriginType

Not-accessible

This object indicates the multicast group mapping type.

Currently, BSR and auto-RP are supported.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.2

hwPimGroupMappingAddressType

InetAddressType

Not-accessible

This object indicates the address type of a multicast group.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.3

hwPimGroupMappingGrpAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates a multicast group address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.4

hwPimGroupMappingGrpPrefixLength

InetAddressPrefixLength

Not-accessible

This object indicates the mask length of a multicast group address.

The value ranges from 4 to 128.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.5

hwPimGroupMappingRpAddressType

InetAddressType

Not-accessible

This object indicates the address type of an RP.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.6

hwPimGroupMappingRpAddress

InetAddress (SIZE (0..0)) (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Not-accessible

This object indicates the address of an RP.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.7

hwPimGroupMappingPimMode

HWPimMode

Read-only

This object indicates the PIM mode.

Currently, SM is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.13.1.8

hwPimGroupMappingPrecedence

Unsigned32

Read-only

The value of this object identifies the priority of each mode of RP mapping.
  • 1: Auto-RP mapping
  • 2: BSR-RP mapping
This object is implemented as:
  • 0: Auto-RP
  • 1: BSR-RP

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwPimGlobalCtlMsgCountTable

This table is used to query the count of global PIM messages.

The indexes of this table are hwPimGlobalCtlMsgCountIpVersion and hwPimGlobalCtlMsgCountMsgState.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.1

hwPimGlobalCtlMsgCountIpVersion

InetVersion

Not-accessible

This object indicates the IP address version of PIM messages:
  • 1: IPv4

  • 2: IPv6

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.2

hwPimGlobalCtlMsgCountMsgState

HWPimCtlMsgState

Not-accessible

This object indicates the status of PIM messages:
  • 1: Receive

  • 2: Sent

  • 3: Invalid

  • 4: Filter

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.3

hwPimGlobalCtlMsgCountRegister

Unsigned32

Read-only

This object indicates the count of PIM Register messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.4

hwPimGlobalCtlMsgCountRegisterStop

Unsigned32

Read-only

This object indicates the count of PIM Register-Stop messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.5

hwPimGlobalCtlMsgCountProbe

Unsigned32

Read-only

This object indicates the count of PIM Probe messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.59.1.6

hwPimGlobalCtlMsgCountCrp

Unsigned32

Read-only

This object indicates the count of PIM CRP messages.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read only after multicast is enabled and PIM is configured on the interface.

hwPimInterfaceCtlMsgCountTable

This table is used to query the count of PIM messages on an interface.

The indexes of this table are hwPimInterfaceCtlMsgCountIfIndex, hwPimInterfaceCtlMsgCountIpVersion, and hwPimInterfaceCtlMsgCountMsgState.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.1

hwPimInterfaceCtlMsgCountIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.2

hwPimInterfaceCtlMsgCountIpVersion

InetVersion

Not-accessible

This object indicates the address version of a PIM interface:
  • 1: IPv4

  • 2: IPv6

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.3

hwPimInterfaceCtlMsgCountMsgState

HWPimCtlMsgState

Not-accessible

This object indicates the status of PIM messages:
  • 1: Receive

  • 2: Sent

  • 3: Invalid

  • 4: Filter

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.4

hwPimInterfaceCtlMsgCountAssert

Unsigned32

Read-only

This object indicates the count of PIM Assert messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.5

hwPimInterfaceCtlMsgCountHello

Unsigned32

Read-only

This object indicates the count of PIM Hello messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.6

hwPimInterfaceCtlMsgCountJoinPrune

Unsigned32

Read-only

This object indicates the count of PIM Join or Prune messages.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.149.4.1.58.1.7

hwPimInterfaceCtlMsgCountBsr

Unsigned32

Read-only

This object indicates the count of PIM BSR messages.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read only after multicast is enabled and PIM is configured on the interface.

Description of Alarm Objects

hwPimNeighborLoss

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.1

hwPimNeighborLoss

hwPimNeighborUpTime

hwPimNeighborIfName

hwPimInstanceID

This alarm is generated in following conditions:
  • The timer of the PIM neighbor expired.
  • The switch received a Hello message with the Holdtime value being 0.

This object is implemented as defined in the corresponding MIB files.

hwPimInvalidRegister

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.2

hwPimInvalidRegister

hwPimGroupMappingPimMode

hwPimInvalidRegisterAddressType

hwPimInvalidRegisterOrigin

hwPimInvalidRegisterGroup

hwPimInvalidRegisterRp

hwPimInstanceID

hwPimInstanceName

This alarm is generated in following conditions:
  • The switch that received the Register message was not the RP to which the group address in the Register message corresponded.
  • The group address carried in the received Register message was in the SSM group address range of the local switch.

Currently, the sending of the trap message for the Invalid Register message carrying a group address in the SSM range is not supported.

hwPimInvalidJoinPrune

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.3

hwPimInvalidJoinPrune

hwPimGroupMappingPimMode

hwPimInvalidJoinPruneAddressType

hwPimInvalidJoinPruneOrigin

hwPimInvalidJoinPruneGroup

hwPimInvalidJoinPruneRp

hwPimNeighborUpTime

hwPimNeighborIfName

hwPimInstanceID

hwPimInstanceName

This alarm is generated in following conditions:
  • The RP address carried in the received Join/Prune message is different from the address of the RP that serves the group on the switch.
  • The Join/Prune message of the (*.G) or (S,G,RPT) type was received but its group address was in the SSM range.

This object is implemented as defined in the corresponding MIB files.

hwPimRpMappingChange

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.4

hwPimRpMappingChange

hwPimGroupMappingPimMode

hwPimGroupMappingPrecedence

hwPimInstanceID

hwPimInstanceName

This alarm is generated in following conditions:
  • A static RP was re-configured in the network.
  • A C-RP with higher priority emerged in the network.

This object is implemented as defined in the corresponding MIB files.

hwPimInterfaceElection

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.5

hwPimInterfaceElection

hwPimInterfaceAddressType

hwPimInterfaceAddress

hwPimInterfaceName

hwPimInstanceID

hwPimInstanceName

This alarm is generated in following conditions:
  • The PIM interface received a new Hello message and the DR priority or IP address of the PIM interface was greater than that of other interfaces in the shared network segment.

  • The PIM interface changes to the Up state but it does not receive any Hello message from other interfaces after the first Hello interval expires.

This object is implemented as defined in the corresponding MIB files.

hwPimNeighborAdd

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.6

hwPimNeighborAdd

hwPimNeighborExpiryTime

hwPimInstanceID

This object indicates that an alarm message is sent wen the number of PIM neighbors increases.

This object is implemented as defined in the corresponding MIB files.

hwPimGRStart

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.7

hwPimGRStart

hwPimGRStartTime

hwPimGRInterval

hwPimInstanceID

This object indicates that PIM enters the GR state.

This object is implemented as defined in the corresponding MIB files.

hwPimGREnd

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.8

hwPimGREnd

hwPimGREndTime

hwPimInstanceID

This object indicates that PIM leaves the GR state.

This object is implemented as defined in the corresponding MIB files.

hwPimMrtLimit

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.9

hwPimMrtLimit

hwPimMrtLimitAddressType

hwPimMrtLimitSource

hwPimMrtLimitGroup

hwPimInstanceID

This alarm is generated when the number of PIM entries exceeds the upper limit defined in the License file.

This object is implemented as defined in the corresponding MIB files.

hwPimMrtLimitClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.12

hwPimMrtLimitClear

  • hwPimMrtLimitAddressType
  • hwPimMrtLimitSource
  • hwPimMrtLimitGroup
  • hwPimInstanceID
  • hwPimInstanceName

The number of PIM entries falls below the upper limit defined in a PAF file.

This object is implemented as defined in the corresponding MIB file.

hwPimStarGThresholdExceed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.13

hwPimStarGThresholdExceed

  • hwPimNotificationAddressType
  • hwPimStarGCurrentCount
  • hwPimStarGThreshold
  • hwPimStarGTotalCount

This object indicates that the proportion of global PIM (*, G) entries created to the maximum global PIM (*, G) entries allowed reaches the upper alarm threshold.

This object is implemented as defined in the corresponding MIB file.

hwPimStarGThresholdExceedClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.14

hwPimStarGThresholdExceedClear

  • hwPimNotificationAddressType
  • hwPimStarGCurrentCount
  • hwPimStarGThreshold
  • hwPimStarGTotalCount

This object indicates that the proportion of global PIM (*, G) entries created to the maximum global PIM (*, G) entries allowed falls below the lower alarm threshold.

This object is implemented as defined in the corresponding MIB file.

hwPimStarGExceed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.15

hwPimStarGExceed

  • hwPimNotificationAddressType
  • hwPimNotificationSrcAddr
  • hwPimNotificationGrpAddr
  • hwPimStarGTotalCount
  • hwPimInstanceName

This object indicates that the number of global PIM (*, G) entries created reaches the maximum number of global PIM (*, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

hwPimStarGExceedClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.16

hwPimStarGExceedClear

hwPimNotificationAddressType

This object indicates that the number of global PIM (*, G) entries created falls below the maximum number of global PIM (*, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

hwPimSGThresholdExceed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.17

hwPimSGThresholdExceed

  • hwPimNotificationAddressType
  • hwPimSGCurrentCount
  • hwPimSGThreshold
  • hwPimSGTotalCount

This object indicates that the proportion of global PIM (S, G) entries created to the maximum global PIM (S, G) entries allowed reaches the upper alarm threshold.

This object is implemented as defined in the corresponding MIB file.

hwPimSGThresholdExceedClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.18

hwPimSGThresholdExceedClear

  • hwPimNotificationAddressType
  • hwPimSGCurrentCount
  • hwPimSGThreshold
  • hwPimSGTotalCount

This object indicates that the proportion of global PIM (S, G) entries created to the maximum global PIM (S, G) entries allowed falls below the lower alarm threshold.

This object is implemented as defined in the corresponding MIB file.

hwPimSGExceed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.19

hwPimSGExceed

  • hwPimNotificationAddressType
  • hwPimNotificationSrcAddr
  • hwPimNotificationGrpAddr
  • hwPimSGTotalCount
  • hwPimInstanceName

This object indicates that the number of global PIM (S, G) entries created exceeds the maximum number of global PIM (S, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

hwPimSGExceedClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.20

hwPimSGExceedClear

hwPimNotificationAddressType

This object indicates that the number of global PIM (S, G) entries created falls below the maximum number of global PIM (S, G) entries allowed.

This object is implemented as defined in the corresponding MIB file.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065666

Views: 14536

Downloads: 47

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next