No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting an SVF System

Restarting an SVF System

Context

When upgrading or troubleshooting an SVF system, you can restart the SVF system, including the parent and all ASs.

Procedure

  1. Run reboot uni-mng

    The SVF system is restarted.

    This command can be used only after the SVF function is enabled.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34635

Downloads: 291

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next