No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Log Output Configuration

Verifying the Log Output Configuration


  • Run the display channel [ channel-number | channel-name ] command to view the channel configuration.
  • Run the display info-center filter-id [ id | bymodule-alias modname alias ] command to view information filtered by the information center.
  • Run the display logbuffer command to check logs recorded in the log buffer.
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 42694

Downloads: 360

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next