No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Clock Source Attribute Configuration

Verifying the Clock Source Attribute Configuration

Procedure

  • Run the display clock { config | source [ ptp ] } [ slot slot-id ] command to view information about clock sources, including the validity of clock signals, SSM quality level, and ID of each clock source.
  • Run the display clock source freq-deviation [ slot slot-id ] command to view the frequency deviation values of clock sources.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 50925

Downloads: 441

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next