No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Synchronous Ethernet

Application Scenarios for Synchronous Ethernet

In Figure 13-13, devices on the IP network are connected to each other, and clock synchronization needs to be implemented between upstream and downstream devices.

Figure 13-13  Synchronous Ethernet networking

To ensure reliability on the clock synchronization network, Device1 and Device4 import clock signals. Device2 can synchronize the clock signals transmitted by the core switch through Ethernet streams. During network deployment, each device preferentially traces the clock signals sent from Device1. If the clock source connected to Device1 is faulty, devices trace the clock signals sent from Device4.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 83618

Downloads: 523

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next