No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Clock Source Selection Mode

Configuring the Clock Source Selection Mode

Context

If the status or quality of clock sources on a synchronous Ethernet network is prone to fluctuate, you are advised to configure the automatic clock source selection mode to ensure that devices can trace the optimal clock source. You can also manually or forcibly specify the clock source to be traced based on the clock source quality.

Pre-configuration Tasks

Before configuring the clock source selection mode, configure a clock source. For details, see

Configuring a Clock Source.

Configuration Procedure

The following configuration tasks can be performed in any sequence.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 33950

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next