No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Fault Management

Overview of Fault Management


Fault management efficiently manages and reports alarms and events generated on a device in a centralized manner.


The network expands and becomes more complex. When a module on a device is faulty, a great number of alarms may be generated on one or more devices. The alarms, however, may be lost due to limited capability of handling alarms on the devices or the NMS. As a result, certain needed alarms cannot be displayed, which inconveniences network management.

To collect valid fault information on the NMS in an efficient way, configure the fault management function to efficiently manage and report alarms in a centralized manner.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 76839

Downloads: 515

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next