No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping All Python Scripts
Stopping All Python Scripts
Context
If commands cannot be entered on the switch due to OPS
Python script exceptions, stop all OPS Python scripts to make the
switch work properly.
Procedure
Run ops
abort
All OPS Python scripts are stopped.
Follow-up Procedure
To restore the OSPF function, perform
the following operations:
Run the system-view command to enter the system view.
Run the ops command to enter the OPS view.
Run the undo
script-assistant pythonscript-name command to delete the assistant of the abnormal Python script.
Run the return command to return to the user view.
Run the ops uninstall filescript-name command to uninstall the abnormal Python script.
Run the system-view command to enter the system view.
Run the ops command to enter the OPS view.
Run the undo assistant scheduler suspend command to enable
the OPS assistant to restore the OPS function.