No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an AS in Centralized Mode (Global Batch Configuration)

Configuring an AS in Centralized Mode (Global Batch Configuration)


In global configuration mode, only the SVF forwarding mode, AS URL encoding function, and authentication-free rules can be configured.


  1. Run system-view

    The system view is displayed.

  2. Configure global service functions on the parent.

    Service Function



    Configure the SVF forwarding mode.

    1. Run the uni-mng command to enter the uni-mng view.

    2. Run the forward-mode centralized command to set the SVF forwarding mode to centralized forwarding.

    An SVF system supports two forwarding modes: centralized forwarding and distributed forwarding.

    • In centralized forwarding mode, traffic forwarded by the local AS and forwarded between ASs is sent to the parent for forwarding.

    • In distributed forwarding mode, an AS directly forwards local traffic and the parent forwards traffic between ASs.

    By default, the forwarding mode of an SVF system is distributed forwarding.

    Configure the URL encoding function for ASs.

    1. Run the uni-mng command to enter the uni-mng view.

    2. Run the portal url-encode disable command to disable the URL encoding function for ASs.

    To improve web application security, data from untrustworthy sources must be encoded before being sent to clients. URL encoding is most commonly used in web applications. After URL encoding is enabled for ASs, special characters in redirected URLs are converted to secure formats, preventing clients from mistaking them for syntax signs or instructions and unexpectedly modifying the original syntax. In this way, cross-site scripting attacks and injection attacks are prevented. By default, URL encoding is enabled in ASs. This function can be disabled using the portal url-encode disable command.

    Configure authentication-free rules.

    For details, see (Optional) Configuring Authorization Information for Authentication-free Users in the S2720, S5700, and S6720 V200R013C00 Configuration Guide - User Management.

    In addition to the configurations in service profiles, the parent delivers the configured Portal authentication-free rules to ASs. Authentication-free rules 0 to 127 can be delivered to ASs of the S5720EI model; authentication-free rules 0 to 31 can be delivered to ASs of other models; authentication-free rules outside the two ranges will not be delivered to ASs.

    You cannot specify the interface parameter when the parent delivers authentication-free rules to an AS.

    Create service VLANs for ASs.

    1. Run the uni-mng command to enter the uni-mng view.

    2. Run the as service-vlan authorization {vlan-id1 [ to vlan-id2 ] } &<1-16> command to create service VLANs for ASs.

    By default, all interfaces on an AS belong to the default VLAN, that is, VLAN 1.

    Enable IGMP snooping for a service VLAN on ASs.

    1. Run the uni-mng command to enter the uni-mng view.

    2. Run the as service-vlan igmp-snooping {vlan-id1 [ to vlan-id2 ] } &<1-16> command to enable IGMP snooping for a specified service VLAN on ASs.

    By default, IGMP snooping is disabled for service VLANs on ASs.

  3. Run commit as { name as-name | all }

    The configuration is committed.

    Before submitting the authentication-free rule configuration to an AS, you need to enter the uni-mng view. After submitting the configuration, you can run the display uni-mng commit-result free-rule command to check the authentication-free rule delivery result.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 76692

Downloads: 515

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next