No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping a Python Script Assistant

Stopping a Python Script Assistant


When you configure multiple Python script assistants and need to debug the registration event or when you maintain the system, you can stop script assistants to prevent the device from running the Python scripts.


  1. Run system-view

    The system view is displayed.

  2. Run ops

    The OPS view is displayed.

  3. Run shutdown script-assistant script-name

    The Python script assistant is stopped.

    By default, the Python script assistant is started.

    Stopping a running Python script assistant interrupts the task of the assistant. Exercise caution when you perform this operation.

    To restart a Python script assistant, run the undo shutdown script-assistant script-name command.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 42675

Downloads: 360

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next