No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View the Serial Number of an Optical Module?

How Can I View the Serial Number of an Optical Module?

Method 1: Obtain the Optical Module Serial Number by Using a Command

  • Run the display elabel command to view the electronic label of an optical module. BarCode indicates the serial number of the optical module.
    <HUAWEI> display elabel
    /$[ArchivesInfo Version]
    [Board Properties]
    Description=10Gbps-256nm-Copper Pigtail-3(copper)
  • Run the display transceiver interface interface-type interface-number command to view information about a specified optical module. Manu. Serial Number indicates the serial number of the optical module.
    <HUAWEI> display transceiver interface gigabitethernet 0/0/49
    GigabitEthernet0/0/49 transceiver information:
    Common information:
      Transceiver Type               :1X_CopperPassive_SFP
      Connector Type                 :Copper Pigtail
      Wavelength(nm)                 :-
      Transfer Distance(m)           :3(copper)
      Digital Diagnostic Monitoring  :NO
      Vendor Name                    :TIME
      Vendor Part Number             :D09181-1A
      Ordering Name                  :
    Manufacture information:
      Manu. Serial Number        :D132500133
      Manufacturing Date             :2013-09-07
      Vendor Name                    :TIME

Method 2: Obtain the Optical Module Serial Number Onsite

You can check the label attached on the optical module to obtain the serial number.

Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 85008

Downloads: 523

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next