No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, monitoring interface, OPS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View the Serial Number of a Device?

How Can I View the Serial Number of a Device?

Method 1: Obtain the Equipment Serial Number by Using a Command

Run the display elabel slot slot-id command to view electronic label information. slot-id specifies the slot ID of the device. In the command output, BarCode specifies the equipment serial number.
<HUAWEI> display elabel slot 0
/$[System Integration Version]  
/$SystemIntegrationVersion=3.0   
      
      
[Slot_0]      
/$[Board Integration Version]  
/$BoardIntegrationVersion=3.0  
    
    
[Main_Board]     
      
/$[ArchivesInfo Version]      
/$ArchivesInfoVersion=3.0       
                 
           
[Board Properties]   
BoardType=CX22EFGEA      
BarCode=2102351820109C000451 
Item=02351820 
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Obtain the Equipment Serial Number Through the Web System

When enabled on a device, the web system can be used to view the equipment serial number.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to a device through the web system and click Monitor on the toolbar to view device information, including the equipment serial number, as shown in Figure 1-1.

Figure 1-1  System Description

Web system classical version (not supported in V200R011C10 and later versions)

Log in to a device through the web system and click Device Summary on the toolbar to view board information, including the equipment serial number, as shown in Figure 1-2.

Figure 1-2  Board information

Method 3: Obtain the Equipment Serial Number by Viewing the Serial Number Label

  • On the above models, the equipment serial number label is attached to the rear side of the device.



    NOTE:
    The serial number label has a total of 20 characters, for example, 210235383610C3000006. The serial number shown in the figure is only used as an example. The serial number label location on the rear side of a device varies according to the device model.
  • On the above models, the equipment serial number label is attached to the front side of the device.



  • On the above models, the equipment serial number label is attached to the top of the device, on the corner closest to the left of the interface side.



  • On the above models, there is a removable equipment serial number label in the middle of the rear side of the device.



  • On the above models, there is a removable equipment serial number label in the middle of the left part on the rear side of the device.



  • On the above models, there is a removable equipment serial number label at the lower left of the rear panel.



Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100065674

Views: 34279

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next